TV One 1T-C2 Series Specification sheet

www.tvone.com
     

Output object such as a TV
DVD Player, VCR, Camera, etc
RGB Input and Output
To control the unit using
the optional CC-300 or
via Computer Control
DVD Player, VCR, Camera, etc
RGB Input and Output
DVD Player, VCR, Camera, etc
Power Input
12 Volts DC
1T-C2 Series
QUICK SET-UP
Congratulations on
purchasing your 1T-C2 series
unit. Use this card as a quick
setup guide to help you get
started and get a basic feel
for the powerful toolset of
features the unit contains. To
get the most out
of and fully understand the
unit, please refer to the 1T-C2
Series Manual.
Please bear in mind this
card is for use with the 1T-
C2 series, not just one unit.
Some options and connectors
may vary or differ from unit
to unit.
Contents & Connecting
First things fi rst, before you even begin to use the unit,
unpack it from its packaging and make sure you have
all of the following:
1 Infra-red remote control
1 Operations Manual
1 Composite Video (CV) Cable, 6' (2m) BNC to BNC
1 RS-232 9D plug to socket, 6' (2m)
1 HD15 to HD15 Cable, 6' (2m)
1 AC Power adaptor (optional)
If any items are missing or defective, contact your
supplier. If you are unable to resolve the problem
with your supplier, contact TV One via the web at:
http://www.tvone.com/support
for prompt replacement.
Once you have connected all the required equipment
as per the diagram you are ready to unleash the full
potential of the unit.
On turning on the unit, provided all the desired
connections have been made properly, you will see a
PC loop through image on the screen; the image may
be scaled up to 1024 x 768.
To begin using the functions of your unit please
consult the manual supplied which will cover each
area of the unit in greater detail.
Your unit is now ready.
Quick-setup-C2-Series.indd 1 24/7/06 11:06:28 am