twall Premium64 User manual

twall®Premium64 mobile / stationary
Interactive sports and training device
User manual Rev. 4.0
Data-CD

D| 3
twall®Premium64 mobile / stationary User manual | Rev. 4.0
Table of contents:
Hardware documentation
1 Product description---------------------------------------------------------------------------------------- 4
1.1 Handling according to regulations----------------------------------------------------------------------------4
2 Scope of delivery ------------------------------------------------------------------------------------------- 5
2.1 Overview - scope of delivery of the twall®Premium64 mobile -------------------------------------------5
2.1.1 Detailed list of components including assembling steps--------------------------------------------------5
2.2 Overview - scope of delivery of the twall®Premium64 stationary --------------------------------------7
2.2.1 Detailed list of components including assembling steps--------------------------------------------------7
3 Assembly------------------------------------------------------------------------------------------------------- 9
3.1 Mobile installation of the twall®Premium64 ----------------------------------------------------------------9
3.1.1 Storage space requirements------------------------------------------------------------------------------------9
3.1.2 Assembly principle of the profile connectors ---------------------------------------------------------------9
3.1.3 Assembly instructions ----------------------------------------------------------------------------------------- 10
3.1.3.1 Assembling the frame base ----------------------------------------------------------------------------------10
3.1.3.2 Assembling the aluminium frame -------------------------------------------------------------------------- 12
3.1.3.3 Assembling the basic modules------------------------------------------------------------------------------- 15
3.2 Stationary installation of the twall®Premium64------------------------------------------------------------ 18
3.2.1 Storage space requirements --------------------------------------------------------------------------------- 18
3.2.2 Assembly instructions ----------------------------------------------------------------------------------------- 18
3.2.2.1 Assembling the aluminium frame -------------------------------------------------------------------------- 18
3.2.2.2 Assembling the basic modules------------------------------------------------------------------------------- 22
4 Maintenance-------------------------------------------------------------------------------------------------22
5 Troubleshooting -------------------------------------------------------------------------------------------22
6 Technical specifications ---------------------------------------------------------------------------------23
6.1 Data sheet twall®Premium64 mobile and stationary---------------------------------------------------- 23
6.2 Data sheet - Accessories --------------------------------------------------------------------------------------23
Software documentation
7 Operating twall®using control panel --------------------------------------------------------------24
7.1 Executing twall®programs ---------------------------------------------------------------------------------- 24
7.2 Viewing highscores -------------------------------------------------------------------------------------------- 25
7.3 Settings ---------------------------------------------------------------------------------------------------------- 25
8 Operating twall®using computer--------------------------------------------------------------------26
8.1 Connecting twall®to computer----------------------------------------------------------------------------- 26
8.2 Driver installation ---------------------------------------------------------------------------------------------- 26
8.2.1 Installing drivers using Microsoft Windows XP®-------------------------------------------------------- 26
8.2.2 Installing drivers using Microsoft Windows Vista®------------------------------------------------------- 27
8.3 Software installation ------------------------------------------------------------------------------------------ 28
8.4 Software description ------------------------------------------------------------------------------------------ 29
8.4.1 The welcome page-------------------------------------------------------------------------------------------- 29
8.4.2 Program settings ----------------------------------------------------------------------------------------------- 29
8.4.3 Executing twall®programs ---------------------------------------------------------------------------------- 29
8.4.3.1 Saving programs to twall®---------------------------------------------------------------------------------- 30
8.4.3.2 Highscores ------------------------------------------------------------------------------------------------------ 31
8.4.4 Simulating twall®programs --------------------------------------------------------------------------------- 31
8.4.5 Creating new twall®programs ------------------------------------------------------------------------------ 32
8.4.6 Editing twall®programs -------------------------------------------------------------------------------------- 34
8.4.7 Editing Sound sets ---------------------------------------------------------------------------------------------34
8.5. Firmware update ----------------------------------------------------------------------------------------------- 35
9 Standard twall®programs ------------------------------------------------------------------------------36
Appendix: Handout

4 |D
twall®Premium64 mobile / stationary User manual | Rev. 4.0
Hardware documentation
1 Product description
The twall®is an interactive sports device using light pulses to specifically initiate motion
sequences. At a wall consisting of evenly arranged, large pads, colored signals light up (available
separately as well as in combination) and have to be deactivated by touching them again which
defines sterical movements. Depending on the training sequence used condition, agility, the
ability to respond, and if required specific muscular endurance can be trained. The different
elements can be predefined in the program so that they light up in a selective or random
sequence, position and speed. The task is always the same: To deactivate the light as quickly as
possible by pressing the buttons.
The software-controlled program sequences provide both individual training and group training.
By controlling each touch element individually it is possible to adjust the twall®training settings
according to size, sphere of activity, visual perception as well as the tactile situation of the
person trained. Furthermore, product version twall®color allows to integrate cognitive tasks
using various colors and sounds. Also, the small construction depth makes it easy to integrate
twall®to existing room concepts.
1.1 Handling according to regulations
The use of the twall®is intended for training and game purposes of human beings exclusively.
It is strictly recommended that the operator checks if the aptitude of the training program suits
the training person. The twall®has to be operated by the provided power supply unit only.
As a precaution we would like to make you aware of the fact that the twall®control panel
generates high frequency, electric oscillations and despite compliance with legal regulations it
may effect other electronic devices such as cardiac pacemakers etc.
Please be aware that the fastening of the twall®has to be secured on site and is not within the
manufacturers obligation. The applicability of the walls should be checked and plasterboard
walls should be covered at least twice. Fixing elements such as screw anchors and tie bars must
have adequate tensile strength.
The fastening should be checked on a regular basis. In the case that fixing elements become
loose the twall®must not be used any further until the fastening has been repaired entirely.
Continuous operation of a single or all touch pads is not permitted as it can lead to a strong
heating of the LED (light-emitting diode) modules. Sequences that force a single or all touch
pads to light up for longer than 2 minutes are prohibited and can cause the loss of warranty.

D| 5
twall®Premium64 mobile User manual | Rev. 4.0
2 Scope of delivery
2.1 Overview - scope of delivery of the twall®Premium64 mobile
A1 1 x Frame base
A2 1 x Aluminium frame
A3 4 x twall®Basic modules
A4 4 x Weights
B1 1 x Stainless steel frame cover left
B2 1 x Stainless steel frame cover right incl. control panel with power
supply jack and power supply switch (connections for further equipment such
as loudspeakers or headsets are available)
B3 2 x Stainless steel frame covers (top/bottom)
CAccessories (included in scope of delivery)
DRequired tools (not included in scope of delivery)
EUser manual and data-CD
2.1.1 Detailed list of components including assembling steps
A1 1 x Frame base consisting of:
A1a 1 x Frame base profile 45 x 90 x 2023 mm | 1.77 x 3.54 x 79.65 inch
A1b 1 x Frame base profile 45 x 90 x 1933 mm | 1.77 x 3.54 x 76.10 inch
A1c 2 x Frame base profiles 45 x 90 x 1055 mm | 1.77 x 3.54 x 41.54 inch
A1d 2 x Frame base profiles 45 x 90 x 910 mm | 1.77 x 3.54 x 35.83 inch
A1e 4 x Profile angles 30 x 30 x 5 mm | 1.18 x 1.18 x 0.20 inch
A1f 4 x Joints for the angles braces
A1g 2 x Angles braces 45 x 45 x 1900 mm | 1.77 x 1.77 x 74.80 inch
Assembling the frame base – three steps:
I. Mounting the frame base profiles
20 x Profile connectors (of which 4 are provided for the side supports at the aluminium frame)
4 x Rubber feet (black, adhesive)
4 x Cover caps (black, plastic)
II. Attaching the profile angles to the frame base
12 x Fillister head screws with flange M8x16 (3 per angle)
12 x T-nuts M8 (3 per angle)
III. Fastening the joints to the angles braces
16 x Adjusting blocks for the joints
4 x Joints for angle braces
4 x Socket head screws M8x25 to fit the joints to the angle braces
4 x Washers
4 x Socket head screws M8x16 to fit the joints to the frame base and the aluminium frame
4 x Washers
4 x T-nuts M8 to fit the joints to the frame base and the aluminium frame
A2 1 x Aluminium frame consisting of:
A2a 2 x Side supports 45 x 90 x 2250 mm | 1.77 x 3.54 x 88.58 inch
A2b 1 x Shield 8 mm | 0.32 inch
A2c 4 x Frame profiles long 45 x 45 x 1933 mm | 1.77 x 1.77 x 76.10 inch
(of which one with pre-assembled PVC installation channel)
A2d 2 x Frame profiles short 45 x 45 x 840 mm | 1.77 x 1.77 x 33.07 inch
A2e 8 x Profile angles 28 x 28 mm | 1.10 x 1.10 inch

6 |D
twall®Premium64 mobile User manual | Rev. 4.0
Assembling the aluminium frame – three steps:
I. Mounting the frame profiles
8 x Profile connectors
2 x Cover caps (black, plastic)
4 x Combination profiles (grey, PVC)
II. Attaching the profile angles to the frame profiles
16 x Fillister head screws with flange (2 per angle)
16 x T-nuts M6
III. Fastening the angles braces
(Components included in part )
 A3 4 x Basic modules consisting of:
A3a 1 x Basic module top left with manifold PCB (printed circuit board)
A3b 1 x Basic module bottom left
A3c 1 x Basic module top right with manifold PCB with line filter
A3d 1 x Basic module bottom right
Assembling the basic modules – two steps:
I. Setting up the basic modules
8 x Socket head screws M8x30
8 x Washers
8 x T-nuts M8
II. Connecting the basic modules to the control panel
16 x 14-stranded flat ribbon cables to connect to the manifold PCBs marked as
0.1 - 0.4, 1.1 - 1.4, 2.1 - 2.4 and 3.1 - 3.4
2 x 26-stranded flat ribbon cables to connect to the control panel (marked as A and B)
1 x double-pole power supply cable including connectors 1 and 2 in pre-assembled
PVC installation channel
A4 4 x Weights
B1 1 x Stainless steel frame cover left
B2 1 x Stainless steel frame cover right
incl. control panel with power supply jack and power supply switch
(connections for further equipment such as loudspeakers or headsets are available)
B3 2 x Stainless steel frame covers (top/bottom)
Assembling the stainless steel frame covers:
11 x Fillister head screws M6x10
CAccessories (included in scope of delivery)
C1 1 x Power supply line (with Euro connector)
C2 1 x USB cable (A/B)
C3 1 x Adapter (power supply unit)
C4 1 x Set of Allen keys (4 mm, 5 mm and 6 mm | 0.16 inch, 0.20 inch and 0.24 inch)
DRequired tools (not included in scope of delivery)
Stepladder
Spirit level
Measuring tape
Slot screwdriver 9 mm | 0.35 inch
 EUser manual and data-CD

D| 7
twall®Premium64 stationary User manual | Rev. 4.0
2.2 Overview - scope of delivery of the twall®Premium64 stationary
A2 1 x Aluminium frame
A3 4 x twall®Basic modules
B1 1 x Stainless steel frame cover left
B2 1 x Stainless steel frame cover right
incl. control panel with power supply jack and power supply switch
(connections for further equipment such as loudspeakers or headsets are available)
B3 2 x Stainless steel frame covers (top/bottom)
CAccessories (included in scope of delivery)
DRequired tools (not included in scope of delivery)
E User manual and data-CD
2.2.1 Detailed list of components including assembling steps
A2 1 x Aluminium frame consisting of:
A2a 2 x Side supports 45 x 90 x 2250 mm | 1.77 x 3.54 x 88.58 inch
A2b 1 x Shield 8 mm | 0.32 inch
A2c 4 x Frame profiles long 45 x 45 x 1933 mm | 1.77 x 1.77 x 76.10 inch
(of which one with pre-assembled PVC installation channel)
A2d 2 x Frame profiles short 45 x 45 x 840 mm | 1.77 x 1.77 x 33.07 inch
A2e 8 x Profile angles 28 x 28 mm | 1.10 x 1.10 inch
A2f 4 x Angles for wall fastening 86 x 86 x 43 mm | 3.39 x 3.39 x 1.69 inch
Assembling the aluminium frame – four steps:
I. Mounting the frame profiles
8 x Profile connectors
2 x Cover caps (black, plastic)
4 x Combination profiles (grey, PVC)
II. Attaching the profile angles to the frame profiles
16 x Fillister head screws with flange M6x14 (2 per angle)
16 x T-nuts M6
III. Attaching the angles for wall fastening
8 x Verbus-Ripp-screws M8x20 (hexagon socket)
8 x T-nuts M8
IV. Setting up the aluminium frame
4 x Plastic dowels 10x70
4 x Hexagon head wood screws 10x100
A3 4 x Basic modules consisting of:
A3a 1 x Basic module top left with manifold PCB (printed circuit board)
A3b 1 x Basic module bottom left
A3c 1 x Basic module top right with manifold PCB and line filter
A3d 1 x Basic module bottom right
Assembling the basic modules – two steps:
I. Setting up the basic modules
8 x Socket head screws M8x30
8 x Washers
8 x T-nuts M8

8 |D
twall®Premium64 stationary User manual | Rev. 4.0
II. Connecting the basic modules to the control panel
6 x 14-stranded flat ribbon cables to connect to the manifold PCBs marked as
0.1 - 0.4, 1.1 - 1.4, 2.1 - 2.4 and 3.1 - 3.4
2 x 26-stranded flat ribbon cables to connect to the control panel
(marked as A and B)
1 x double-pole power supply cable including connectors 1 and 2 in
pre-assembled PVC installation channel
 B1 1 x Stainless steel frame cover left
B2 1 x Stainless steel frame cover right
incl. control panel with power supply jack and power supply switch
(connections for further equipment such as loudspeakers or headsets are available)
B3 2 x Stainless steel frame covers (top/bottom)
Assembling the stainless steel frame covers:
11 x Fillister head screws M6x10
CAccessories ((included in scope of delivery)
C1 1 x Power supply line (with Euro connector)
C2 1 x USB cable (A/B)
C3 1 x Adapter (power supply unit)
C4 1 x Set of Allen keys (4 mm, 5 mm and 6 mm | 0.16 inch, 0.20 inch and 0.24 inch)
DRequired tools (not included in scope of delivery)
Stepladder
Spirit level
Measuring tape
Hammer drill
Drill bit 12 mm | 0.47 inch
Wrench 17 mm | 0.67 inch
EUser manual and data-CD

D| 9
twall®Premium64 mobile User manual | Rev. 4.0
3 Assembly
ATTENTION: Before start-up a period of 1-2 hours is advised for the equipment to acclimatize. Please pay
attention to condensation that might appear.
3.1 Mobile installation of the twall®Premium64
3.1.1 Storage space requirements
In order to set up the twall®a compact and
even stand space of a minimum of
3 x 3 m | 118.11 x 118.11 inch is required
(fig. 3.1-1). It must carry a weight of at
least 231 kg | 36.4 stone.
At least 2 people and the following tools
are required:
Allen keys (included in scope of delivery)
Stepladder
Spirit level
Measuring tape
Slot screwdriver 9 mm | 0.35 inch
3.1.2 Assembly principle of the profile connectors
fig. 3.1-1
3 m | 118.11 inch
3 m | 118.11 inch
Training area
twall®
Frame Base
Cross piece
Set screw (with
hexagon socket)
Anchor
Mark at the anchor
(should point towards
the cross piece)
Mark at the cross piece
(should point towards
the anchor)
Chamfering
Spring
fig. 3.1-2
Anchor neck
PLEASE NOTE: For more information, please see view of individual assembling steps on separate handout.

10 |D
twall®Premium64 mobile User manual | Rev. 4.0
3.1.3 Assembly instructions
3.1.3.1 Assembling the frame base
I. Mounting the frame base profiles:
Step Please remove the packaging
material. You can use it as a pad during the
assembly to avoid that the components are
scratched or damaged.
Step Before you start putting together
the frame base A1 (fig. 3.1-3), please attach
all the profile connectors to the provided
positions at the frame base profiles first. Four
(4) profile connectors should be kept for the
side supports of the aluminium frame.
In order to fasten the profile connectors, the
chamfering should point towards the cross
piece which is indicated by the mark at the
anchor (fig. 3.1-2).The set screw will be
slightly screwed into the cross piece with
the corresponding Allen key. The anchor will
be drawn into the profile automatically. It is
important that you can still see the neck of the
anchor (fig. 3.1-4) to be able to insert it into
the lead channels at a later point (fig. 3.1-5).
It might be the case that you need to push the
anchor slightly against the cross piece while
screwing it in.
Step  Shove the two (2) frame base
profiles A1d into the lead channels of the
frame profiles A1a and A1b (fig. 3.1-5).
Please ensure that the cross pieces of the
connectors in the frame base profiles A1d
point inwards and the cross pieces of the
connectors in the frame base profile A1b
point outwards.
Step  Now shove the frame base
profiles A1c , one to the right and to the
left, into the lead channels of the frame base
profile A1a.
Align the outer edges of the profiles so they
can be flush-mounted. The cross pieces of
the connectors should point outwards. Now
tighten the profile connectors with the corres-
ponding Allen key (ca. 25 Nm).
Step  Measure the distance between
the frame base profiles A1c and A1d zuein-
ander. The distance has to be 42 cm (16.54
inch) between the inner edges. Once you have
fastened the frame base profiles A1c and A1d
you can strongly bolt together all other profile
connectors (ca. 25 Nm). (fig. 3.1-6).
fig. 3.1-6
fig. 3.1-5
A1a
A1b
A1d
A1c
User´s view
Lead channels
fig. 3.1-3
User´s view
fig. 3.1-4
Anchor neck
Cross piece