Ubiquiti AmpliFi AFi-G User manual

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 1/20
AmpliFi Router AmpliFi MeshPoints (Qty. 2) Power Adapter
Ethernet Cable
Package Contents
Hardware Overview
Router
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 2/20
Touchscreen Display
Adjustable LED
Ethernet Ports
WAN Port
Power Port
USB Port
The front of the AmpliFi Router features an adjustable, full-color touchscreen
display.
The bottom of the AmpliFi Router features an adjustable LED that is fully lit by
default when the Router is configured and ready for use.
The brightness settings of the touchscreen and LED are configurable
using the AmpliFi app.
Four Gigabit Ethernet ports available to connect 10/100/1000 Mbps wired
network devices to the internet.
Connects to the broadband modem provided by your ISP (Internet Service
Provider).
The Power Adapter connects to this port.
Reserved for future use.
MeshPoint
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 3/20
Adjustable Antenna
Signal LEDs
The MeshPoint antenna can be adjusted to provide optimal signal coverage for
your location.
The Signal LEDs will reflect signal strength once the MeshPoint is connected
to the Router.
Installation
The AmpliFi Router can be installed using one of the following methods:
App Users AmpliFi app for iPhone or Android™
Non-App Users Connect to default AmpliFi wireless network (SSID) from a
computer or tablet.
App Users
1.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 4/20
2.
3.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 5/20
4.
5.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 6/20
6.
7.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 7/20
8. Follow the on-screen instructions to configure your AmpliFi Router.
Non-App Users
1.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 8/20
2.
3.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 9/20
4.
5.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 10/20
6.
7.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 11/20
8.
9. Connect to the new wireless network that you've created.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 12/20
Installing the MeshPoints
Best Performance
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 13/20
Mesh Multi-Hop
1.
2.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 14/20
App Features
The system dashboard provides an overview of the AmpliFi Wi-Fi
system including network status, number of connected clients, and
active download/upload speeds. Tap devices to display/edit settings.
Tap Start Test on the Performance screen to run a speed test that
will provide your download speed, upload speed, and connection
ping time. Swipe left on the throughput section to view additional
data. A history of recent tests is displayed at the bottom.
To provide guest access, determine the number of guests, select a
time limit for their access, and tap Start. Guests simply connect to
your wireless network named with the -guest label. No password is
required. As guests connect, the number of users connected will be
displayed in the app. Tap Stop at any time to turn off the guest
network.
The Family Profiles feature allows you to create profiles for family
members, groups, or areas of your home. Assign devices to the
profile, schedule quiet time (when internet is not accessible), and
pause the internet at any time.
The Diagnose option will check your WAN link, IP settings, internet
connection, and MeshPoint status.
Side Menu - 24/7 Live Chat Support
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 15/20
Router Reset
Tap in the upper left of the app to access the side menu. Tap Live Support for
24/7 live chat support. Remote Access can also be enabled from this menu.
Resetting to Factory Defaults
If the AmpliFi Router administration password is lost, factory default settings can
be restored.
Use an object such as a straightened paper clip to press Reset located on the
bottom of the AmpliFi Router for approximately 10 seconds until the LED turns
off.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 16/20
MeshPoint Reset
If the AmpliFi Router is reset, all MeshPoints should also be reset using the
same method.
System Specifications
Max. TX Power 26 dBm
Radios 6
MIMO Chains 18
Speed 5.25 Gbps
Range 20,000 sq. ft
ESD/EMP Protection ± 24kV Air/Contact
Buttons Reset
Antennas (3) Dual-Band Antennas
Display 1.6" (40.6 mm) Diagonal, 240 x 240, 212 ppi,
G+F Touch, Full Color
Wi-Fi Standard 802.11ac
Power Save Supported
Wireless Security WPA2-PSK AES/TKIP
Operating Temperature 14 to 131° F (-10 to 55° C)
Operating Humidity 5 to 95% Noncondensing
Certifications FCC / CE / IC
Supported Data Rates
802.11ac 13 Mbps to 1300 Mbps (MCS0 - MCS9, VHT
20/40/80)
802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Operating Frequency
US/CA 2412 - 2462
U-NII-1 5150 - 5250
U-NII-3 5725 - 5850
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 17/20
Worldwide 2412 - 2472
5150 - 5250
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis,
and, where applicable, specify arbitration instead of jury trials or class actions.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
The AmpliFi Router and MeshPoints have been approved by FCC under FCC ID: SWX-AFR
(for Router); FCC ID: SWX-AFPHD (for MeshPoints).
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 18/20
ISED Canada
CAN ICES-3(B)/NMB-3(B)
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
The AmpliFi Router and MeshPoints have been approved by ISED Canada under IC: 6545A-
AFR (for Router); IC: 6545A-AFPHD (for MeshPoints).
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Le AMPLIFI Router et MeshPoints ont été approuvés par ISDE CanadaISED Canada en
vertu IC : 6545A-AFR ( pour le routeur ) ; IC : 6545A-AFPHD ( pour MeshPoints ).
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance 20 cm between
the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
AVIS IMPORTANT :
Déclaration sur l’exposition aux rayonnements :
Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements
dans un environnement non contrôlé.
Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il
y ait une distance minimale de 20 cm entre l’élément rayonnant et vous.
Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre
émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 19/20
Brazil
Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e
não pode causar interferência em sistemas devidamente autorizados.
CE Marking
CE marking on this product represents the product is in compliance with all directives that
are applicable to it.
Country List
AT BE BG CY CZ DE DK EE EL ES FI FR HR HU
IE IT LV LT LU MT NL PL PT RO SE SI SK UK
BFWA (Broadband Fixed Wireless Access) members noted in blue
Note: This device meets Max. TX power limit per ETSI regulations.
The following apply to products that operate in the 5 GHz frequency range:
Note: This device is restricted to indoor use only when operating in the 5150 - 5350
MHz frequency range within all member states.
Note: All countries listed may operate at 30 dBm. BFWA member states may
operate at 36 dBm.
Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member
states. Other countries listed may use the 5.8 GHz frequency band.
RoHS/WEEE Compliance Statement
Declaration of Conformity
Online Resources
AFi-G Quick Start Guide

7/1/2019 AFi-G Quick Start Guide
https://amplifi.com/qsg/AFi-G/AFi-G_EN.html 20/20
© 2016-2019 Ubiquiti Inc. All rights reserved.
AFi-G Quick Start Guide