Ubiquiti UniFi UBB User manual

UBB (Qty. 2) Ball Joint Mount (Qty. 2) Lock Ring (Qty. 2)
Metal Strap (Qty. 2) Gigabit PoE (48V, 0.32A) with
Mounting Bracket (Qty. 2)
Power Cord (Qty. 2)
Package Contents
System Requirements
One of the following:
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

UniFi Cloud Key (1.0.5 or newer) or UniFi Dream Machine (1.0.1 or newer)
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
UniFi Controller software v5.12.x (or newer), available at: ui.com/download/unifi
UniFi Network App (iOS or Android™) or Web Browser (Google Chrome preferred)
Installation Requirements
Pole-mounting: 8 mm socket wrench or screwdriver
Wall-mounting: wall fastener (not included)
The device needs to have clear line of sight to the sky for proper GPS operation.
Shielded Category 5 (or above) cabling with drain wire should be used for all wired
Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the device and
the other at the entry point to the building. The ETH-SP-G2 will absorb power surges
and safely discharge them into the ground.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Hardware Overview
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

System LED
Flashing White Initializing.
White Factory defaults, waiting for integration.
Alternating White/Blue
Device is busy; do not touch or unplug it. This usually
indicates that a process such as a firmware upgrade
is taking place.
Blue Successfully integrated into a network and working
properly.
Flashing
This is used to locate a device.
When you click Locate in the UniFi Network Controller
software, the LED will flash blue. The software will
also display the location of the device on the map.
Red with Circulating Blue
LED
The 60 GHz link cannot be established or has
dropped due to bad weather. If the UBB fails over to 5
GHz, the LED will remain red. When the 60 GHz link
is re-established, the LED will turn blue or the custom
color you selected in the UniFi Network Controller.
Note: If the other bridge device is within
range and the UBB LED is red, we
recommend moving the UBB device up or
down to enhance the signal strength.
Green In the Manage Device section of the UniFi Network
Controller, you can enable the Alignment Tool. When
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Reset Button
Ethernet Port
the UBB devices are properly aligned, the LED will
turn green.
Note: If the other bridge device is within
range and the UBB LED is green and red,
we recommend moving the UBB device up
or down until the LED is green.
Resets to factory defaults. The device should be running after bootup is complete.
Press and hold the Reset button for about 10 seconds until the LED starts flashing
and then becomes solidly lit. After a few seconds, the LED will turn off, and the
device will automatically reboot.
Note: The UBB radios are pre-paired. If a link is lost due to configuration
changes, you can reset both UBB radios to re-establish the link.
Local UBB radio (source LAN) This Gigabit Ethernet port is used to connect the
power and should be connected to the LAN and DHCP server.
Remote UBB radio (bridged LAN) This Gigabit Ethernet port is used to connect the
power and should be connected to the LAN. It will receive its IP address from the
DHCP server via the wireless link to the local UBB radio.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Hardware Installation
For each UBB radio, go to the appropriate mounting instructions: Pole Mounting or
“Wall Mounting”.
Pole-Mounting
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
3.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD