Ubiquiti UniFi WiFi BaseStation XG User manual

UniFi WiFi BaseStation XG Adjustment Bracket Pole Clamp
Carriage Bolts (Qty. 4) Flange Nuts (Qty. 4) Lag Screws (Qty. 4)
Package Contents
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Gigabit PoE (50V, 1.2A) Power Cord
Installation Requirements
13 mm wrench
Category 5 (or above) UTP cable for indoor installations
IMPORTANT: The UWB-XG requires the UniFi Controller v5.7 or higher,
available at:
ui.com/download/unifi
Outdoor Installation Requirements
Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet
connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit: ui.com/toughcable
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.7 or newer (available at: ui.com/download/unifi)
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

10 GbE
All UniFi devices support off-site management controllers. For setup details, see the
User Guide on the website: ui.com/download/unifi
Hardware Overview
LED
Ports
The 10 GbE port is a 1/10 Gbps Ethernet port used to connect to the LAN and
DHCP server. It can also be used to connect the power.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

1 GbE
Reset
Note: The UWB-XG can be powered using an 802.3bt PoE switch or the
included Gigabit PoE adapter. For instructions, see Connecting Power.
The 1 GbE port is a 10/100/1000 Ethernet port used for bridging. It can also be used
to connect the power.
The Reset button serves two functions for the UWB-XG:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
VESA Mounting
If you choose to use your own mount, remove the four M4 x 10 screws from the back of
the UWB-XG and detach the pre-installed mount.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Hardware Installation
Pole Mount
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

1.
2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

5.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD