Ubiquiti UniFi UAP-IW-HD User manual

Cover Plate UAP-IW-HD Back Plate
Wall-Mount Screws (Qty. 4) Torx Screws (Qty. 2) Phillips Screws (Qty. 2)
Package Contents
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Torx Security Screw Phillips Security Screw
Installation Requirements
Pre-installed electrical wall box
Category 5 (or above) UTP cabling approved for indoor use
Phillips and flathead screwdrivers
T10 Torx bit (for Torx Screw option)
UniFi Switch with PoE
IMPORTANT: The UAP-IW-HD requires a UniFi Switch with PoE for power.
Passive PoE adapters are not recommended.
IMPORTANT: UniFi Controller v5.7 is recommended for managing the UAP-
IW-HD and is available for download at: ui.com/download/unifi
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 (or above)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.7 or newer (available at: ui.com/download/unifi)
Hardware Overview
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

PoE In + Data
Back Panel
10/100/1000 Ethernet port supports data and 802.3af PoE input. The UAP-IW-HD
itself requires 11W.
802.3at PoE+ input is required to use PoE passthrough. Connect this port to a UniFi
Switch with PoE that is connected to your LAN and DHCP server.
Bottom Panel
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

PoE Out + LAN 1
LAN 2 - LAN 4
Reset
10/100/1000 Ethernet port supports data and PoE passthrough (requires 802.3at
PoE+ input). The maximum PoE passthrough output is 12W.
Note: To power and connect an 802.3af device to the LAN, you must use
802.3at PoE+ input.
These three 10/100/1000 Ethernet ports support data only. Used to connect client
devices to the LAN.
The Reset button serves two functions for the UAP-IW-HD:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Security Screw
Side Panel
(Optional) The Security Screw secures the Cover Plate after installation. You have
the option to use the included Torx (shown) or Phillips Security Screw.
LED
Security Tab
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

In addition to the optional Security Screw, the Security Tab helps to secure the Cover
Plate after installation. If you need to remove it, use a flathead screwdriver to depress
the Security Tab while detaching the Cover Plate:
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Back Plate
The Back Plate offers a variety of mounting holes for use with different wall boxes. Here
are a few examples with the appropriate mounting holes outlined in blue:
USA or China
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Europe
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Hardware Installation
An electrical wall box should be pre-installed with an Ethernet cable running from the
box to a UniFi Switch with PoE.
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD