Ublox BMD-3 Series User manual

Quick start BMD-3xx evaluation
Copyright © 2019, u-blox AGUBX-19042094 - R01
J-Link debug
USB connector
BMD-3xx
module
J5
Target debug
interface
Power switch
4 user buttons
J8
J6 J7 J9
For BMD-300, BMD-301, BMD-330, BMD-350, BMD-360
Reset button
BMD-301 only:
U.FL antenna
connector
NFC
antenna
connector
LEDs 1-4

Useful links
• BMD-3xx-EVAL user guide:
www.u-blox.com/docs/UBX-19033349
• Nordic Semiconductor doc library:
infocenter.nordicsemi.com
• SEGGER Embedded Studio and J-link:
segger.com/embedded-studio
segger.com/jlink-software.html
More information
For more information regarding the
BMD-3xx evaluation kits, contact your
nearest u-blox support:
www.u-blox.com/
contact-technical-support.html
Getting started
1. Download and install the SEGGER
J-Link software.
2. Download and install the SEGGER
Embedded Studio.
3. Download the Nordic nRF5 SDK,
version v15 or newer.
4. Extract the SDK to a convenient
working location.
Kit includes
• BMD-3xx evaluation board
• Micro-USB cable
• NFC antenna (BMD-30x and BMD-350)
• 2.4 GHz antenna kit (BMD-301 only)
UBX-19042094 - R01