Ultimate Support IQ Series User manual

IQ SERIES®
KEYBOARD STANDS
Manual
IQ-1000
IQ-2000
IQ-3000
Visit ultimatesupport.com
to download a detailed
product manual, read full
warranty details and to
register for warranty.
800.525.5628 . www.ultimatesupport.com . Copyright 2017, Ultimate Support Systems . All Rights Reserved
The bottom and top of the X-Stand supports feature
adjustable leveling end caps. Turn the leveling end caps
as needed to adjust for uneven surfaces.
Available second
tier for the IQ-1000
& IQ-2000
(Sold Separately)
Available second
tier for the IQ-3000
(Sold Separately)
Features
IQ-3000, IQ-2000 & IQ-1000

NOTE: Your IQ-1000, IQ-2000 and IQ-3000 will open to this height
every time you use it unless a new height is desired.
SE T TING MEMORY LOCK SE T TING MEMORY LOCK
3. Open the stand to the
desired position.
1. Turn the z-knob counter
clockwise to spread apart
memory lock teeth. Both
sides of the memory lock
should turn freely if teeth
are spread apart enough.
2. Make sure that both
ribbed catches are pushed
out away from center of
memory lock.
1. With the Memory Lock facing you, hold top left tube with
left hand and with your right hand pull the Memory Lock
knob toward you. Being sure to fully retract the pin from
the Memory Lock plate.
2. Holding the extracted Memory Lock knob with right hand,
pivot the “X” brace with left hand to desired height and release
knob. Be sure the Memory Lock is fully and securely engaged
before placing keyboard on stand.
Memory
Lock Knob
Ribbed
Catch
Ribbed
Catch
Memory
Lock
Teeth
4. Again, make sure that
booth ribbed catches are
pushed away from center
of memory lock.
5. Line up teeth so that they interlock and
turn z-knob clockwise to lock in place.
IQ-3000 IQ-2000 & IQ-1000