Ultimate Support MC-125 User manual

Revision 5, 07.27.09 . Product Manual Item #MC-125-M
Product Manual
for Ultimate Support
MC-125
ITEM #16124
800.525.5628 . www.ultimatesupport.com . Copyright 2009, Ultimate Support Systems . All Rights Reserved
warranty registration
Visit www.ultimatesupport.com for a quick and convenient process for registering your new
Ultimate Support product. Warranty Registration and Proof of Purchase are required for warranty
fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium Service and
Support Plan details are available online under Music Gear & Instrument Stands / Customer Support.
4

USER INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
STEP 1a - 1b
Attaching Swivel Casters:
Put caster into “Lock”
position (1a). Screw all
three swivel casters into
the threaded corners on
the underside of the base
(1b). Securely tighten.
STEP 2
Attaching Upright Shaft:
Thread upright assembly
securely into the base (2).
32
Congratulations
on your purchase!
STEP 4
Attaching Boom Extension:
Screw the boom extension
onto the threaded end of the
main boom portion of
the stand (4).
STEP 3
Attaching Boom:
Thread the boom portion
of the stand onto the top
of the upright shaft (3).
Securely tighten.
1 - Casters:
Unlock to move the stand on the smooth, rolling
casters. Lock in place (1).
2 - Height Adjustment:
Loosen the upright clutch (2) by turning
counterclockwise. Adjust to your desired height.
Tighten the clutch by turning clockwise.
3 - Boom Length Adjustment:
Loosen the clutch (3) by turning counterclockwise.
Adjust to your desired length. Tighten the clutch by
turning clockwise.
4- Boom Positioning:
The boom has 3-way adjustment: front-to-back,
up-and-down, and rotationally. Simply loosen the
control knob (4), make all three adjustments and
tighten snugly.
5- Counterweight & Boom Extension:
For optimum balance, the boom counterweight
can be repositioned. Simply unscrew the two halves
of the counterweight, position along the boom
portion of the stand and tighten. Set boom extension
to vertical or hanging straight down (see figure 4,
page 2). Securely tighten. Attach microphone.
6 - Cable Management:
Easy-to-use cable management clips are
conveniently located in two places along the boom
and on the upright portion of the stand. Simply
press your mic cable into the clip for a clean look.
Gently pull the cable out to remove.
1a
1b
1
4
4
5
2
2
3
3
6
Threaded
Caster
Wheel
Lock
Caster
with Lock
Upright
Clutch
Boom
Clutch
Boom
Adjustment
Knob
Cable
Management Clip
Counterweight
Threaded
Corner
Threaded
Base
Boom
on Upright
Boom
Extension
Highly Mobile – With innovative,
inline skate - style wheels, the
MC -125 glides smoothly along
nearly any flat surface with very
little effort.
Super Stable Base –The MC-125
offers a large diameter base with
locking, rollerblade-style wheels
which provide a low center of
gravity and extraordinary stability.
Highly Adjustable – The long
boom telescopes from 35”- 61”
and features a friction - free
clutch arm extension while the
MC-125’s height is adjustable
from 51. 5” to 82 .75”.