Ultimate Support PRO Series User manual

Pro -T/17198
Pro-T-T/17213
Pro-T-F/17214
Pro-T-Short-T/17212
Pro-T-Short-F/17211
Pr o - SB /172 01
Pr o - S T/172 0 0
Rev. 1 •02.16.15 •UM-MIC-PRO-SERIES
MANUAL
USER
STANDS
800.525.5628 . www.ultimatesupport.com . Copyright 2015, Ultimate Support Systems . All Rights Reserved
Visit ultimatesupport.com
to read full warranty details
& to register for warranty.
Pro-T-F Pro-T-T
Pro-SB Pro-ST
Pro-T-Short-T
Pro-T
Pro-T-Short-F

STEP 1
Tripod Base: Loosen Z-knob at base, slide base down, tighten
Z-knob and lock legs into place.
Weighted Base: Shaft screws into weighted base.
Stackable Base: Shaft screws into stackable base.
STEP 2
Turn the ergonomic, patented Quarter-Turn Clutch counter
clockwise a quarter turn. Adjust stand height up or down.
Securely retighten clutch by turning clockwise.
STEP 3 Universal Mic Attachment
To adjust U.S. to metric, use 1.5 Allen
Wrench to unlock threads. Turn U.S.
threads counter clockwise until it is
removed. U.S. lock nut will come off too.
STEP 4 Universal Mic Attachment
After choosing desired thread, place mic
clip on universal mic attachment. Then
turn lock nut counter clockwise to lock mic
clip in place.
Metric
Thread
Lock
Nut
Lock
Nut
1.5 Allen
Wrench
Ergonomic
Patented
Quarter-Turn
Clutch
Z - KNOB
Legs Lock
in Place
Pro Series Set-up Instructions Ulti-Boom Pro Set-up Instructions
Rotate
Pan Depth
Tilt
Patented
ONE-TOUCH ADJUSTMENT
Controls tilt, pan, depth, and rotation from
just one ergonomic Z-knob!
Fixed & Telescoping Ulti-Boom Pro
Telescoping Ulti-Boom Pro
STABLELOCK™ LEVER
StableLock lever provides fast telescoping
adjustment with non-slip security.
1
2
3 4
U.S.
Thread