Ultrasonix SonixOne Q+ User manual

Analogic Ultrasound
Service
Manual
SonixOne Q+
Ultrasound System

SonixOne Service Manual 00.053.206, Revision A
Ultrasonix Medical Corporation
SonixOne Ultrasound System
Service Manual
Ultrasonix Medical Corporation
130 – 4311 Viking Way
Richmond, BC V6V 2K9
Canada
www.analogicultrasound.com
[e-mail]
1.866.437.9508
1.604.279.8550
1.778.296.3860 (Support)
© 2014 Analogic Corporation
00.053.206, Revision A, June 27, 2014
All Rights Reserved.
US Patents 6,216,029 - 6,325,759 - 6,558,326 - 6,911,008 - 7,274,325 - 8,088,070 - 8,556,815 - D654,178
Authorized European Representative
MEDNET Gmbh
Borkstrasse 10
48163 Munster Germany

SonixOne Service Manual 00.053.206, Revision A Table of Contents
i
TABLE OF CONTENTS
CHAPTER 1: GENERAL INFORMATION...................................................................................................................................................... 1-1
1.1 AUDIENCE .................................................................................................................................................................................................... 1-1
1.1.1 Prescription Device ................................................................................................................................................................................ 1-1
1.2 VOLTAGE DISCLAIMER ............................................................................................................................................................................... 1-1
1.3 CONNECTIVITY DISCLAIMER ..................................................................................................................................................................... 1-1
1.4 PATIENT PRIVACY....................................................................................................................................................................................... 1-1
1.5 SERVICE DISCLAIMER ................................................................................................................................................................................ 1-1
1.6 SYSTEM HANDLING .................................................................................................................................................................................... 1-2
1.7 LICENSE AGREEMENT................................................................................................................................................................................ 1-2
1.8 TRADEMARKS AND PATENTS.................................................................................................................................................................... 1-2
1.9 SYSTEM OVERVIEW.................................................................................................................................................................................... 1-3
1.10 PHYSICAL DESCRIPTION ........................................................................................................................................................................... 1-5
1.10.1 LCD Display/Touch Screen ..................................................................................................................................................................... 1-5
1.10.2 Operator Console.................................................................................................................................................................................... 1-5
1.10.3 Modulo .................................................................................................................................................................................................... 1-5
1.10.4 Transducers ............................................................................................................................................................................................ 1-5
1.10.5 Battery Module........................................................................................................................................................................................ 1-5
CHAPTER 2: SYSTEM SPECIFICATIONS.................................................................................................................................................... 2-1
2.1 DIMENSIONS ................................................................................................................................................................................................ 2-1
2.2 ELECTRICAL RATINGS................................................................................................................................................................................ 2-1
2.3 VOLTAGE ADJUSTMENT............................................................................................................................................................................. 2-1
CHAPTER 3: SYSTEM INSTALLATION........................................................................................................................................................ 3-1
3.1 INSTALLATION ISSUES AND REQUIREMENTS ........................................................................................................................................ 3-1
3.1.1 Environmental Requirements.................................................................................................................................................................. 3-1
3.1.2 Electrical Requirements .......................................................................................................................................................................... 3-2
3.1.2.1 Instrument Input Power Rating.......................................................................................................................................................... 3-2
3.1.3 Electrostatic Discharge ........................................................................................................................................................................... 3-3
3.1.4 Electromagnetic and Radio Frequency Interference............................................................................................................................... 3-3
3.1.5 Wiring Requirements .............................................................................................................................................................................. 3-4
3.1.5.1 Main AC Connection.......................................................................................................................................................................... 3-4
3.1.5.2 Ethernet (Hard-Wired) Network Connection...................................................................................................................................... 3-4
3.1.5.3 Image Management Network ............................................................................................................................................................ 3-4
3.2 PRE-INSTALLATION..................................................................................................................................................................................... 3-5
3.2.1 Preliminary Inspection............................................................................................................................................................................. 3-5
3.2.2 Unpacking Instructions............................................................................................................................................................................ 3-5
3.2.2.1 Unpacking a System.......................................................................................................................................................................... 3-6
3.2.2.2 Unpacking Transducers..................................................................................................................................................................... 3-9
3.3 INSTALLATION ........................................................................................................................................................................................... 3-10
3.3.1 Cart-Mounting–When Cart Ordered with System................................................................................................................................. 3-10
3.3.2 Mechanical Inspection ..........................................................................................................................................................................3-11
3.3.2.1 Wheels ............................................................................................................................................................................................3-11
3.3.2.2 LCD Display/TouchScreen................................................................................................................................................................3-11
3.3.2.3 Cart Height ..................................................................................................................................................................................... 3-12
3.3.3 EMI Filter and Power Pack .................................................................................................................................................................. 3-13
3.3.3.1 Voltage Configuration ...................................................................................................................................................................... 3-13
3.3.4 Powering the System ............................................................................................................................................................................ 3-16
3.3.4.1 Powering the System with a Power Pack........................................................................................................................................ 3-16
3.3.4.2 Turning on Main Power Switch........................................................................................................................................................ 3-16
3.3.4.3 Changing Fuses .............................................................................................................................................................................. 3-17
3.3.5 Battery Module (If Applicable)............................................................................................................................................................... 3-18
3.3.6 Battery Operation.................................................................................................................................................................................. 3-18
3.3.7 Handling Charger Faults ....................................................................................................................................................................... 3-19
3.3.8 Battery Shutdown Mode........................................................................................................................................................................ 3-20
3.3.8.1 Sending the Battery into Shutdown Mode ....................................................................................................................................... 3-20
3.3.8.2 Rebooting the Battery...................................................................................................................................................................... 3-20
3.3.9 Transducer Inspection .......................................................................................................................................................................... 3-20
3.3.10 System Initialization .............................................................................................................................................................................. 3-21
3.3.11 Peripherals (If Applicable)..................................................................................................................................................................... 3-21
3.3.11.1 Barcode Reader .............................................................................................................................................................................. 3-21
3.4 SET SYSTEM DATE AND INSTALL LICENSES ........................................................................................................................................ 3-22

Table of Contents 00.053.206, Revision A SonixOne Service Manual
ii
CHAPTER 4: PERFORMANCE TESTING ..................................................................................................................................................... 4-1
4.1 CONSOLE TEST ............................................................................................................................................................................................4-1
4.2 IMAGE TEST ..................................................................................................................................................................................................4-2
4.3 REMOVABLE (PERIPHERAL) HARDWARE (IF APPLICABLE) ...................................................................................................................4-2
4.4 BATTERY MODULE TEST (IF APPLICABLE) ...............................................................................................................................................4-2
4.5 PULSED DOPPLER SOUND TEST ...............................................................................................................................................................4-2
4.6 LICENSES......................................................................................................................................................................................................4-3
CHAPTER 5: SOFTWARE ............................................................................................................................................................................. 5-1
5.1 SOFTWARE UPDATE....................................................................................................................................................................................5-1
5.1.1 Software Update via the Internet .............................................................................................................................................................5-1
5.1.2 Software Update via a Downloaded File..................................................................................................................................................5-2
5.2 PATIENT DATABASE REPAIR......................................................................................................................................................................5-3
5.3 SYSTEM RECOVERY....................................................................................................................................................................................5-3
CHAPTER 6: PERIPHERALS AND ACCESSORIES .................................................................................................................................... 6-1
6.1 PERIPHERAL COMPONENTS ......................................................................................................................................................................6-1
6.2 ULTRASONIX-APPROVED DEVICES ..........................................................................................................................................................6-1
6.3 PRINTER SETUP...........................................................................................................................................................................................6-1
6.3.1 Local Printer Setup ..................................................................................................................................................................................6-1
6.3.2 Network Printer Setup..............................................................................................................................................................................6-1
6.3.3 Configuring Custom Keys ........................................................................................................................................................................6-3
6.3.3.1 Paper Printing Configuration ..............................................................................................................................................................6-3
6.3.3.2 Trigger Configuration..........................................................................................................................................................................6-3
6.3.3.3 Image Sheet Printing..........................................................................................................................................................................6-4
6.4 CONNECTING THE USB FOOTSWITCH (DUAL OR TRIPLE).....................................................................................................................6-5
6.4.1 Footswitch Setup .....................................................................................................................................................................................6-5
6.5 BARCODE READER .....................................................................................................................................................................................6-6
6.6 ACCESSORIES..............................................................................................................................................................................................6-7
6.6.1 Transducer Disclaimer ............................................................................................................................................................................6-7
6.6.2 Transducer Models ..................................................................................................................................................................................6-7
CHAPTER 7: FIELD SERVICE COMPONENTS............................................................................................................................................ 7-1
7.1 PROTECTING PATIENT DATA .....................................................................................................................................................................7-1
7.1.1 Exporting User Data (As Required) .........................................................................................................................................................7-1
7.1.2 Importing User Data (As Required) .........................................................................................................................................................7-3
7.1.3 Exporting Patient/Exam Data (As Required) ...........................................................................................................................................7-5
7.1.4 Importing Patient/Exam Data (As Required)............................................................................................................................................7-6
7.1.5 Backing up/Exporting Patient Data via the Service Mode Option............................................................................................................7-7
7.1.6 Restoring/Importing Patient Data via the Service Mode Option ..............................................................................................................7-9
7.1.7 Connectivity ........................................................................................................................................................................................... 7-11
7.1.7.1 Side Connectivity Panel ................................................................................................................................................................... 7-11
7.2 BATTERY MODULE SERVICING................................................................................................................................................................7-12
7.2.1 Battery Firmware Upgrade.....................................................................................................................................................................7-12
7.3 BARCODE READER SERVICING ...............................................................................................................................................................7-12
7.4 TRANSDUCER TESTING ............................................................................................................................................................................7-13
7.4.1 Testing the Transducer ..........................................................................................................................................................................7-13
7.4.2 Testing the Transducer Board................................................................................................................................................................7-14
7.5 MISCELLANEOUS PARTS ..........................................................................................................................................................................7-15
7.5.1 Transducers Holders and Cable Hooks.................................................................................................................................................7-15
7.6 RETURNING PARTS FOR SERVICE/REPAIR/REPLACEMENT ...............................................................................................................7-16
7.6.1 Transducers...........................................................................................................................................................................................7-16
7.6.2 Battery Module.......................................................................................................................................................................................7-16
CHAPTER 8: DICOM...................................................................................................................................................................................... 8-1
8.1 DICOM CONFIGURATION OPTIONS ...........................................................................................................................................................8-2
8.1.1 Global Settings ........................................................................................................................................................................................8-2
8.1.2 DICOM Storage Settings .........................................................................................................................................................................8-2
8.1.2.1 DICOM Storage Settings – AE Configuration.....................................................................................................................................8-3
8.1.2.2 DICOM Storage Settings – AE Configuration Storage Settings .........................................................................................................8-4
8.1.2.3 DICOM Storage Settings – Global Storage Settings ..........................................................................................................................8-5
8.1.2.4 DICOM Storage Settings – Brightness/Contrast ................................................................................................................................8-6
8.1.2.5 DICOM Storage Settings – SonixHub Settings ..................................................................................................................................8-7
8.1.3 DICOM Print Settings ..............................................................................................................................................................................8-8
8.1.3.1 DICOM Print Settings – AE Configuration..........................................................................................................................................8-8
8.1.3.2 DICOM Print Settings – AE Configuration Print Settings ...................................................................................................................8-9
8.1.3.3 DICOM Print Settings – AE Configuration Advanced Print Settings ................................................................................................8-10
8.1.3.4 DICOM Print Settings – Brightness/Contrast ................................................................................................................................... 8-11
8.1.4 DICOM Worklist Settings .......................................................................................................................................................................8-12
8.1.4.1 DICOM Worklist Settings – AE Configuration ..................................................................................................................................8-13

SonixOne Service Manual 00.053.206, Revision A Table of Contents
iii
8.2 DICOM CONFIGURATION.......................................................................................................................................................................... 8-14
8.2.1 Gathering Relevant DICOM Information............................................................................................................................................... 8-14
8.2.1.1 Local Network.................................................................................................................................................................................. 8-14
8.2.1.2 DICOM SCU.................................................................................................................................................................................... 8-14
8.2.1.3 DICOM SCP .................................................................................................................................................................................... 8-14
8.2.2 Configuring the Network ....................................................................................................................................................................... 8-15
8.2.3 Configuring DICOM............................................................................................................................................................................... 8-15
8.2.3.1 Local Host ....................................................................................................................................................................................... 8-15
8.2.3.2 DICOM Storage Settings ................................................................................................................................................................. 8-16
8.2.3.3 Custom Keys and DICOM Store...................................................................................................................................................... 8-20
8.2.3.4 DICOM Print Settings ...................................................................................................................................................................... 8-21
8.2.3.5 DICOM Worklist Settings................................................................................................................................................................. 8-24
CHAPTER 9: NETWORK CONFIGURATION................................................................................................................................................ 9-1
9.1 NETWORK .................................................................................................................................................................................................... 9-1
9.1.1 Ethernet (LAN) Network Configuration ................................................................................................................................................... 9-3
9.1.2 Dialup Network Configuration (If Available) ........................................................................................................................................... 9-4
9.1.3 Wireless Configuration............................................................................................................................................................................ 9-5
9.2 CHAT SUPPORT........................................................................................................................................................................................... 9-7
9.2.1 Enabling Chat Support............................................................................................................................................................................ 9-7
9.2.2 Accessing Chat Support ......................................................................................................................................................................... 9-7
9.3 REMOTE SUPPORT ..................................................................................................................................................................................... 9-8
CHAPTER 10: LICENSE.KEY IMPORTATION............................................................................................................................................ 10-1
10.1 OBTAIN AND COPY LICENSE.KEY ONTO THE SYSTEM........................................................................................................................ 10-1
10.2 RE-IMPORT LICENSE.KEY ........................................................................................................................................................................ 10-2
CHAPTER 11: MAINTENANCE ....................................................................................................................................................................11-1
11.1 RECOMMENDED FREQUENCY OF MAINTENANCE PROCEDURES......................................................................................................11-1
11.2 CLEANING SYSTEM COMPONENTS.........................................................................................................................................................11-1
11.2.1 LCD Display/Touch Screen and Cabinet ...............................................................................................................................................11-2
11.2.1.1 LCD Display Cabinet ........................................................................................................................................................................11-2
11.2.1.2 LCD Display/Touch Screen...............................................................................................................................................................11-2
11.2.2 Power Pack ...........................................................................................................................................................................................11-2
11.2.3 Power Cord(s) .......................................................................................................................................................................................11-2
11.2.4 SonixOne Q+ Cart and Accessories .....................................................................................................................................................11-3
11.2.5 Barcode Reader ....................................................................................................................................................................................11-3
11.2.6 Wireless Adapter (When Connected Externally) ...................................................................................................................................11-3
11.2.7 SonixGPS Components .........................................................................................................................................................................11-3
11.2.8 Transducer Holders and Cable Hooks ..................................................................................................................................................11-4
11.2.9 Footswitch (Dual and Triple) .................................................................................................................................................................11-4
11.2.10 Battery Module Filters ............................................................................................................................................................................11-4
11.3 TRANSDUCER MAINTENANCE..................................................................................................................................................................11-6
11.3.1 Usage Guidelines...................................................................................................................................................................................11-6
11.3.2 Ultrasound Coupling Gels ......................................................................................................................................................................11-6
11.3.3 General Transducer Maintenance ........................................................................................................................................................11-7
11.3.3.1 Inspection and Testing......................................................................................................................................................................11-7
11.3.3.2 Storing and Packaging .....................................................................................................................................................................11-7
11.3.4 General Transducer Cleaning/Disinfecting Recommendations and Warnings .....................................................................................11-8
11.3.5 Cleaning/Disinfecting Non-Invasive Transducers ..................................................................................................................................11-9
11.3.5.1 Cleaning Non-Invasive Transducers ..............................................................................................................................................11-10
11.3.5.2 Disinfecting Non-Invasive Transducers ..........................................................................................................................................11-10
11.3.6 Cleaning/Disinfecting Endocavity Transducers.................................................................................................................................... 11-11
11.3.7 Sterilization........................................................................................................................................................................................... 11-11
11.4 SHIPPING TRANSDUCERS FOR SERVICE.............................................................................................................................................11-12
APPENDIX A: ELECTROMAGNETIC IMMUNITY TABLES..........................................................................................................................A-1

Table of Contents 00.053.206, Revision A SonixOne Service Manual
iv

SonixOne Service Manual 00.053.206, Revision A Chapter 1: General Information
1-1
CHAPTER 1: GENERAL INFORMATION
1.1 AUDIENCE
The intended audience of this service manual is properly trained field and in-house service personnel. This system is a
medical device containing several circuit boards, extensive service diagnostics and complex operating software. For these
reasons, Ultrasonix recommends that only trained, certified technical support representatives service this ultrasound system.
1.1.1 Prescription Device
1.2 VOLTAGE DISCLAIMER
The system voltage setting is configured in the factory.
It is the user's responsibility to ensure the system is used only under the electrical conditions dictated by Ultrasonix Medical
Corporation. Failure to comply with these conditions may result in damage to the system which is not covered by the
Ultrasonix warranty.
1.3 CONNECTIVITY DISCLAIMER
1.4 PATIENT PRIVACY
To protect patient data, Ultrasonix strongly recommends regular patient/image file back-up and purging of older patient files
stored on the system. Refer to Chapter 9 in the relevant user manual for details on transferring patient data.
1.5 SERVICE DISCLAIMER
Sonix Ultrasound Systems are configured with a variety of options that may not be available on all platforms. Therefore, some
service instructions will apply only to specific models/configurations.
Caution: United States law restricts this device to sale or use by, or on the order of a Physician.
Caution: For users running the 100V-120V system, always ensure the utility supply voltage is 100V-120V @ 50/60 Hz.
For users running the 200V–240V system, always ensure the utility supply voltage is 200V-240V @ 50/60 Hz.
Cautions:
System networking options are intended for use inside your organization's firewall. Organizations that elect to configure/use
the networking functionality provided by Ultrasonix are assuming all liabilities and risks associated with that decision.
For details on FCC regulations as they apply to the wireless adapter, please refer to the manufacturer's User Guide included
with the system.
IMPORTANT: The contents of the system hard drive may include Personal Health Information that must be protected as
dictated by the laws of the relevant jurisdiction (e.g., Health Insurance Portability & Accountability Act (HIPAA–USA) or
Personal Information Protection and Electronic Documents Act (PIPEDA–Canada)). In order to ensure regulatory
compliance, Ultrasonix will not remove the system hard drive – and the patient data it contains – from the customer site.
In the event the hard drive must be removed from the system, it will be returned to the customer. Final disposition of the
hard drive and its data will remain the customer's responsibility.

Chapter 1: General Information 00.053.206, Revision A SonixOne Service Manual
1-2
1.6 SYSTEM HANDLING
1.7 LICENSE AGREEMENT
Portions of the Sonix computer programs have been patented by Ultrasonix Medical Corporation (Ultrasonix) or are patent
pending, and are licensed under the following software license agreement:
Ultrasonix, or its suppliers, retain(s) ownership of and title to any computer program supplied with the Equipment and to the
trade secrets embodied in such computer programs. Subject to the Buyer’s acceptance and fulfillment of the obligations in
this paragraph, Ultrasonix grants the Buyer a personal, non-transferable, perpetual, non-exclusive license to use any
computer program supplied with the Equipment that is necessary to operate the Equipment solely on the medium in which
such program is delivered for the purpose of operating the Equipment in accordance with the instructions set forth in the
operator’s manuals supplied with the Equipment and for no other purpose whatsoever. Buyer may not reverse – assemble,
reverse – compile or otherwise reverse – engineer such computer programs nor may Buyer make a copy of such program or
apply any techniques to derive the trade secrets embodied therein. In the event of a failure by Buyer to comply with the terms
of this license, the license granted by this paragraph shall terminate. Further, because unauthorized use of such computer
programs will leave Ultrasonix without an adequate remedy at law, Buyer agrees that injunctive or other equitable relief will be
appropriate to restrain such use, threatened or actual. Buyer further agrees that (i) any of the Ultrasonix suppliers of software
is a direct and intended beneficiary of this end-user sublicense and may enforce it directly against Buyer with respect to
software supplied by such supplier, and (ii) NO SUPPLIER OF ULTRASONIX SHALL BE LIABLE TO BUYER FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL INCIDENTAL OR OTHER DAMAGES ARISING OUT OF
THE SUBLICENSE OF THE COMPUTER PROGRAMS SUPPLIED WITH THE EQUIPMENT.
1.8 TRADEMARKS AND PATENTS
Ultrasonix Sonix systems are protected under US Patents 6,216,029 - 6,325,759 - 6,558,326 - 6,911,008 - 7,274,325 -
8,088,070 - 8,556,815 - D654,178.
The following are trademarks of Analogic Corporation: Ultrasonix™, SonixGPS™, SonixHub™, SonixCam™, SonixDVR™,
SonixShine™, SonixOne™, SonixMDP™, SonixSP™, SonixOP™, SonixOne™ and SonixTablet™.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
DICOM®(Digital Imaging and Communications in Medicine) is the registered trademark of the National Electrical
Manufacturers Association (NEMA) for its standards publications relating to digital communications of medical information.
All other products and brand names mentioned in this document are trademarks of their respective companies.
Warnings:
Although a free-stadning system is portable, it weighs more than 30 lbs (13+ kg). To avoid injury, be sure to follow proper
workplace/ergonomic lifting techniques when transporting the system.
When using a free-standing system, do not place the device on any surface that blocks/restricts ventilation (e.g., do not set
the device on a soft surface such as a bed). Failure to comply with this directive could inhibit system airflow and cause the
system to overheat - which is not covered by the system warranty.

SonixOne Service Manual 00.053.206, Revision A Chapter 1: General Information
1-3
1.9 SYSTEM OVERVIEW
The SonixOne Ultrasound System is a software driven, ergonomic, diagnostic medical device. It uses state of the art
technologies to acquire, process and display ultrasound data (Figure 1-1).
The system has several major field serviceable components including: LCD display with built-in speakers and a multi-
position, articulated lift system, operator console, modulo, transducers and UPS.
Figure 1-1: System Components (Stand-Alone)
Figure 1-2: System Components (Cart-Mounted)
Warning: When using a free-standing system, do not place the device on any surface that blocks/restricts ventilation (e.g.,
do not set the device on a soft surface such as a bed). Failure to comply with this directive could inhibit system airflow
and cause the system to overheat - which is not covered by the system warranty.
4
33
1
2
2
1
11
10
7
5
33
4
9
8
6

Chapter 1: General Information 00.053.206, Revision A SonixOne Service Manual
1-4
Table 1-1: System Components
1Carry handle
2LCD display/touch screen
3Speakers
4Side Connectivity Panel (power and network connections, USB and sound ports). Refer to 7.1.7 for connectivity details.
5Power button
6Table
7Transducer holders
8
Front pull/push handle
Warning: If the system is not mounted on the cart, take extra care to stand clear when changing cart height position.
Without the weight of the system to slow it down, the cart can spring upwards very quickly.
9Height adjustment lever
10 Wheelbase
11
Power pack/battery module
Note: Factory-installed option.
Note: For details on mounting/removing the system, refer to 3.3.1.

SonixOne Service Manual 00.053.206, Revision A Chapter 1: General Information
1-5
1.10 PHYSICAL DESCRIPTION
1.10.1 LCD Display/Touch Screen
The monitor is a Liquid Crystal Display (LCD display) with an operating resolution of 1024x768 pixels @ 60Hz
(Hertz) and built-in speakers.
1.10.2 Operator Console
All system controls are touch screen-based.
1.10.3 Modulo
The modulo, which is the heart of the system, is enclosed in the system case with the LCD display/touch screen.
1.10.4 Transducers
Ultrasonix offers a wide selection of high performance transducers for a variety of imaging applications.
Incorporating the latest acoustic materials and technology, these lightweight transducers are ergonomic and
durable for maximum clinical use. Refer to 6.6.1 Transducer Disclaimer for a complete list of transducers
available with the system.
1.10.5 Battery Module
If ordered with the cart, the system can be delivered with an optional lithium ion battery module. Located below the
cart base, the battery module helps to ensure that no data is lost when the system is temporarily unplugged and
moved around. Upon delivery, the module will be turned off and the battery may be completely drained of power.
During installation, the technician will ensure that the system—and therefore the battery module—is left plugged in,
allowing it to completely charge the battery. This will take approximately 6.5 hours.
For details on battery operation, refer to 3.3.5.
Warnings:
NEVER let liquid from any source enter the battery. Failure to do this may result in accidental shorts, shocks or
electrocutions.
DO NOT attempt to service this product yourself. Attempting to open the battery case may cause exposure to
lethal voltages within the unit even when it is apparently not operating and the input wiring is disconnected from the
electrical source. Should the battery require maintenance or replacement, only qualified Ultrasonix Service
Technicians may perform service as detailed in the Service Manual.
Use only the battery recommended and supplied by Analogic Corporation.
For battery service issues, contact Ultrasonix Technical Support.
If the battery is removed from the system, it is the responsibility of the customer to dispose of it in accordance with
all local regulations and laws.

Chapter 1: General Information 00.053.206, Revision A SonixOne Service Manual
1-6

SonixOne Service Manual 00.053.206, Revision A Chapter 2: System Specifications
2-1
CHAPTER 2: SYSTEM SPECIFICATIONS
2.1 DIMENSIONS
Table 2-1: System Dimensions
2.2 ELECTRICAL RATINGS
Table 2-2: Electrical Ratings
Table 2-3: Fuses, Two Required
2.3 VOLTAGE ADJUSTMENT
The standard Voltage Rating for North America is 110 – 125V. The system is equipped to operate at 100 – 120V (±10%) and
200 – 240V (±10%).
Measurement Metric Value US Value
Stand-Alone
Width 45 cm 17.7 in
Depth 17.5 cm 6.9 in
Height 42.5 cm 16.7 in
Weight 15 kg 33 lbs
Power Pack Size (W x L X H) 10.4 cm x 40 cm x 5.8 cm 4.1 in x 15.75 in x 2.3 in
Power Pack Weight 2.7 kg 5.95 lbs
Cart
Width 52.6 cm 20.7 in
Depth 48.5 cm 19.1 in
Height: Maximum/Minimum 150.4 cm/129.5 cm 59.2 in/51 in
Height: range from floor 140.9 cm–165.4 cm 59.2 –51 in
Weight (combined weight) 40 Kg (55 kg) 88 lbs (121 lbs)
Power Pack Size (W x L X H) 10.4 cm x 40 cm x 5.8 cm 4.1 in x 15.75 in x 2.3 in
Power Pack Weight 2.7 kg 5.95 lbs
Battery Module Size (W x L X H) 21.6 cm x 35.5 cm x 11.4 cm 8.5 in x 14 in x 4.5 in
Battery Module Weight 8 kg 17.6 kg
Note: Cart-mounted systems will have either a Power Pack or a Battery Module.
Input 100V—120V @ 50/60 Hz
200V—240V @ 50/60 Hz
Power Rating 120 VAC @ 7.0A
240 VAC @ 4.0A
Fuse Type 7A/250V SLO-BLO
Fuse Size 6.4 mm x 31.8 mm
Caution: Ensure the correct voltage rating has been selected before turning on the system.

Chapter 2: System Specifications 00.053.206, Revision A SonixOne Service Manual
2-2

SonixOne Service Manual 00.053.206, Revision A Chapter 3: System Installation
3-1
CHAPTER 3: SYSTEM INSTALLATION
3.1 INSTALLATION ISSUES AND REQUIREMENTS
3.1.1 Environmental Requirements
Verify the system is to be operated in a room that meets the environmental requirements listed in Table 3-1.
Table 3-1: Environmental Specifications
Table 3-2: Barcode Reader
Table 3-3: Wireless
Caution: Avoid placing the system against walls or structures that may decrease air circulation.
Operational Temperature 50º to 104º F (10º to 40º C)
Operational Humidity 30 to 75% relative humidity
Operational Pressure (kilopascal) 70 kPa to 106 kPa
Shipping/Storage Conditions +5° to +122° F (-15° to +50° C)
Shipping/Storage Humidity 10% to 90% (non-condensing)
Shipping/Storage Pressure 50 kPa to 106 kPa
Warning: Operate in an indoor environment only, free from moisture, flammable liquids, gases, corrosive
substances, strong electrical or magnetic fields and equipment that generates high frequency waves.
Ultrasonix cannot guarantee the proper performance of the system if used in the above-listed conditions.
Operating Temperature 32º to 104º F (0º to 40º C)
Storage Temperature -40º to 140º F (-40º to 60º C)
Humidity 5% to 95% relative humidity, non-condensing
Light Levels Up to 4842 Lux (foot-candles)
Shock Designed to withstand 1.5 m (5') drops
Contaminants Sealed to resist airborne particulate contaminants
Ventilation None required
Operating Temperature 32º to 104º F (0º to 40º C)
Storage Temperature -4º to 158º F (-20º to 70º C)
Humidity 80% maximum, non-condensing
Note: For more details on the wireless adapter and other peripherals, refer to the manufacturer's User's Guides
included with the system.

Chapter 3: System Installation 00.053.206, Revision A SonixOne Service Manual
3-2
3.1.2 Electrical Requirements
Verify the system is to be operated in a room that meets the electrical requirements listed below.
Table 3-4: Electrical Specifications
3.1.2.1 Instrument Input Power Rating
An instrument input power rating has been established to clarify the maximum power requirement of the system
with all accessories. Depending upon the accessories and options installed, the system may not draw the full
amount of power listed below:
Table 3-5: Instrument Power Input Rating (with optional Battery Module)
Table 3-6: Instrument Power Input Rating (without optional Battery Module)
For optimal system performance, use a dedicated, interference-free, isolated, grounded wall outlet. To ensure
grounding reliability, use a hospital-grade power cord and connect it only to an equivalent hospital-grade socket.
The specifications of the hospital-grade power cord as follows:
Table 3-7: Hospital-Grade Power Cord Specifications
Electrical Rating Value
Measurement (System Only) 100V—120V @ 50/60 Hz
200V—240V @ 50/60 Hz
Current Draw (System Only) 120 VAC @ 7.0A
240 VAC @ 4.0A
Power Draw (System Only @ peak) 700 W
Leakage Current (System Only) < 100 uA
Note: Refer to OEM peripheral manuals for peripheral-specific electrical ratings.
System Voltage, VAC Nominal System Power Usage,
including isolated accessory power System Power Usage Isolated Accessory Power Available
120V 5.8A Max 5.8A Max Not Applicable
240V 3.0A Max 3.0A Max @120V Not Applicable
System Voltage, VAC Nominal System Power Usage,
including isolated accessory power System Power Usage Isolated Accessory Power Available
120V 5.8A Max 5.8A Max Not Applicable
240V 3.0A Max 3.0A Max @120V Not Applicable
Input Voltage Hospital Grade Power Cord Specifications
100-120V ~, 50/60Hz 125Vac, 15A, 3 wire, 18 AWG, grounding type, 5-15P Hospital Grade plug cap, less than 6 m long,
CSA & UL approved
200-240V~, 50/60Hz 250Vac, 15A, 3 wire, 18 AWG, grounding type, 6-15P Hospital Grade plug cap, less than 6 m long,
CSA & UL approved

SonixOne Service Manual 00.053.206, Revision A Chapter 3: System Installation
3-3
3.1.3 Electrostatic Discharge
During normal operation, the presence of electrostatic discharge (ESD) can cause system reliability issues. The
following are the most common causes for ESD:
• moving people
• low humidity
• improper grounding
• unshielded cable
• poor connection
• moving machines.
ESD is most likely to occur during periods of low humidity. If the relative humidity is below 50%, static charges can
easily accumulate. ESD generally does not occur when the humidity is above 50%. Any time the charge reaches
approximately 10,000 volts, it is likely to discharge to grounded metal parts.
Although ESD will not hurt humans, it can damage certain electronic devices. The high-voltage pulse can burn out
the inputs of many integrated circuit (IC) devices. This damage might not appear instantly, but it can build up over
time, eventually causing the device to fail.
To prevent damage to the system, use ESD minimizing devices where needed. These devices include: anti-static
mats, humidifiers, and spray. Proper discharge is required before handling any electronic device such as an ESD
strap.
3.1.4 Electromagnetic and Radio Frequency Interference
This equipment has been tested and found to comply with the EMC limits for EN 55011, Group 1, Class A and EN
60601-1-2. These limits are designed to provide reasonable protection against harmful interference in a typical
medical installation. The equipment generates, uses and can radiate radio frequency (RF) energy and if not
installed and used in accordance with these instructions, may cause harmful interference to other devices in the
vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference with other devices (which can be determined by turning the equipment off and on)
the user is encouraged to try to correct the interference with one or more of the following measures:
• reorient or relocate the receiving device
• increase separation distance between equipment
• connect the equipment to an outlet on a circuit different to that which the other device(s) is connected
• consult the manufacturer or field service technician for help.
Warning: The system should not be used adjacent to or stacked with other equipment. If adjacent or stacked use
is necessary, the system should be observed in order to verify normal operation in the configuration in which it
will be used.

Chapter 3: System Installation 00.053.206, Revision A SonixOne Service Manual
3-4
3.1.5 Wiring Requirements
3.1.5.1 Main AC Connection
The electrical feed to the system should be a dedicated/isolated line (no other equipment on the same line) with a
third-wire ground. Ensure a low impedance path for current to return to the source.
3.1.5.2 Ethernet (Hard-Wired) Network Connection
It is the user’s responsibility to provide an Ethernet connection to the system and to install the correct type of cable
in accordance with the building's applicable standards. The commonly used cable is CAT5 (Category 5, 10 Base-T,
unshielded twisted pair).
3.1.5.3 Image Management Network
Obtain the following information from the system administrator:
• list of all equipment that is part of the Image Management network
• logical diagram of the network showing topology, subnets, etc.
• location of all equipment
• location of all LAN (Local Area Network) attachment points
• locations of all power outlets and connector types
• location of any dedicated analog phone line
• all necessary Internet Protocol (IP) addresses and subnet information.
Caution: System networking options are intended for use inside your organization's firewall. Organizations that
elect to configure/use the networking functionality provided by Ultrasonix are assuming all liabilities and risks
associated with that decision.