Unfinished Furniture of Wilmington QUILT RACK 52390 User manual

ITEM NO.: 52390
REVISED NOV 24, 2016
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: QUILT RACK
: 52390

ITEM NO.: 52390
REVISED NOV 24, 2016
Printed in Vietnam
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly
and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to
assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.

ITEM NO.: 52390
REVISED NOV 24, 2016
Printed in Vietnam
- 3 -
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Leg
2
B
Brace
1
C
Long rod
2
D
Short rod
1
E
Top knob
2
F
Bottom knob
2
G
Arm(L-R)
4
H
Foot
4
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Long bolt
(M6x65mm)
4
2
Short bolt
(M6x35mm)
4
3
Wood Plug
(ɸ14.5mm)
8
4
Allen key
(M4x30mmx120mm)
1

ITEM NO.: 52390
REVISED NOV 24, 2016
Printed in Vietnam
- 4 -
STEP 1
Insert arms (G) and feet (H) into legs (A). Then attach knobs (E) and (F) to legs (A) as shown below.
STEP 2
Attach brace (B) and short rod (D) to legs with screws (1) as shown below. Tighten with Allen key (4).
Attach long rods (C) to legs with screws (2) as shown below. Tighten with Allen key (4).

ITEM NO.: 52390
REVISED NOV 24, 2016
Printed in Vietnam
- 5 -
STEP 3
Insert wood plugs (3) over screws to cover them.