Unfinished Furniture of Wilmington R-52581 User manual

ITEM
NO
:
R
-
52581
REVISED AUG 2, 2013
Printed in Vietnam
- 1 -
Description
Item No.
:
ADIRONDACK ROCKER
: R-52581
ASSEMBLY INSTRUCTIONS

ITEM
NO
:
R
-
52581
REVISED AUG 2, 2013
Printed in Vietnam
- 2 -
BEFORE ASSEMB
LY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
ASSEMB
LY TOOLS REQUIRED
NOT INCLUDED

ITEM
NO
:
R
-
52581
REVISED AUG 2, 2013
Printed in Vietnam
- 3 -
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Back
frame 1
B Front leg
(L-R) 2
C Arm
(L-R) 2
D Supporter
(L-R) 2
E Seat
frame 1
F Runner 2
G Crossbar 1

ITEM
NO
:
R
-
52581
REVISED AUG 2, 2013
Printed in Vietnam
- 4 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1 Long bolt
(M6x60mm) 6
2 Short bolt
(M6x35mm) 12
3
Parasgute
Canopy
(M6x13mm)
10 4 Screw
(M4x15mm) 4
5 Allen key
(4x80mm) 2
6
Flat Washer
(ɸ6.5x19mm) 4
STEP 1
Attach supporters (D) to the seat (E) with bolts (2) and Canopy (3). Tighten with Allen key (5).

ITEM
NO
:
R
-
52581
REVISED AUG 2, 2013
Printed in Vietnam
- 5 -
STEP 2
Attach front legs (B) to seat frame (E) and crossbar (G) with bolts (2) and canopy (3).
Note: Do not fully tighten the front legs until after the runners are attached. Attach runners (F) to
front legs (B) with bolts (1) and washers (6). Attach runners (F) to seat frame (E) with bolts (1), washers
(6), and canopy (3) as shown below. Tighten with Allen key (5).

ITEM
NO
:
R
-
52581
REVISED AUG 2, 2013
Printed in Vietnam
- 6 -
STEP 3
Attach back (A) to the seat (E) and supporters (D) with bolts (1) and (2) as shown below. Tighten with
Allen key (5).

ITEM
NO
:
R
-
52581
REVISED AUG 2, 2013
Printed in Vietnam
- 7 -
STEP 4
Attach arms (C) to supporters (D) with bolts (2) as shown below. Tighten with Allen key (5).
Attach arms (C) to front legs (B) with screws (4) as shown below. Tighten with a screwdriver