Unfinished Furniture of Wilmington R-51864 User manual

ITEM
NO
:
R
-
51864
REVISED JUL 22, 2013
Printed in Vietnam
- 1 -
Description
Item No.
:
PORCH ROCKER
: R-51864
ASSEMBLY INSTRUCTIONS

ITEM
NO
:
R
-
51864
REVISED JUL 22, 2013
Printed in Vietnam
- 2 -
BEFORE ASSEMB
LY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
ASSEMBLY TOOLS REQUIRED
NOT
INCLUDED

ITEM
NO
:
R
-
51864
REVISED JUL 22, 2013
Printed in Vietnam
- 3 -
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Seat 1 B Front leg
frame 1
C Back 1 D Long
stretcher 2
E Short
stretcher 2 F Left arm 1
G Right arm 1 H Runner
2
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1 Short Bolt
(M8 x 35mm) 1 2 Long Bolt (M8 x 70mm) 8
3 Flat Washer
(ɸ8.5x19mm) 9 4 Lock Washer
(8.5 X 14mm) 9
5 Long screw
(M4 x45mm) 16
6 Allen key
(4x80mm) 1

ITEM
NO
:
R
-
51864
REVISED JUL 22, 2013
Printed in Vietnam
- 4 -
STEP 1
Attach seat (A) to back (C) with bolts (1) and (2), and washers (3) and (4) as shown below. Tighten
with Allen key (6).

ITEM
NO
:
R
-
51864
REVISED JUL 22, 2013
Printed in Vietnam
- 5 -
STEP 2
Attach front leg frame (B) to seat (A) with bolts (2), and washers (3) and (4) as shown below. Tighten
with Allen key (6).
Attach stretchers (D) and (E) to front and back legs with screws (5). Tighten with a screwdriver.

ITEM
NO
:
R
-
51864
REVISED JUL 22, 2013
Printed in Vietnam
- 6 -
STEP 3
Attach arms (F) and (G) to front and back legs with screws (5) as shown below. Tighten with the
screwdriver.
Attach runners (H) to bottom of front and back legs with screws (5) as shown below. Tighten with the
screwdriver.