Unfinished Furniture of Wilmington T-14060X User manual

ITEM NO.: T-14060X
ISSUED JUL 13, 2018
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: GROVE PARK 40X60X78 EXT TABLE
: T-14060X

ITEM NO.: T-14060X
ISSUED JUL 13, 2018
Printed in Vietnam
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly
and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to
assemble.
-DO NOT tighten all screws, bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
-Long exposure to rubber or soft plastic may cause a chemical reaction and damage the
finish of your table. Protect the surface of the table with cloth if you are using any product
with rubber feet or base.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1
B
Leg
4
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Long Bolt
(M8 x 60mm)
8
2
Lock Washer
(8.5 x 13mm)
8
3
Flat washer
(2 x8.5 x 19mm)
8
4
Allen Key
(M4 x 30mm x 110mm)
1

ITEM NO.: T-14060X
ISSUED JUL 13, 2018
Printed in Vietnam
- 3 -
STEP 1
Attach legs (B) to the top (A) with bolts (1), and washers (2) and (3) as shown below. Tighten with
Allen key (4).
STEP 2
Unlock the table top on both sides from underneath the top. Pull the 2 parts of the table top apart
and remove the leaf as shown below.
`

ITEM NO.: T-14060X
ISSUED JUL 13, 2018
Printed in Vietnam
- 4 -
STEP 3
Fold two aprons of the center leaf and put it underneath the table top as shown below.

ITEM NO.: T-14060X
ISSUED JUL 13, 2018
Printed in Vietnam
- 5 -
STEP 4
Push the table top closed. Lock the mechanism underneath two sides of the table top as shown below.
STEP 5
Unfold two aprons of center leaf as shown below.
Place the leaf in the center of the open table top. Push the table top closed. Lock the mechanism
underneath two sides of the table top as shown below.