Unfinished Furniture of Wilmington B-6A User manual

ITEM NO : B-6-SHELF AND B-6A AND B-6B
ISSUED DEC 04, 2014
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: SHELF INSERT FOR STURBRIDGE BUFFET
: B-6-SHELF AND B-6A AND B-6B

ITEM NO : B-6-SHELF AND B-6A AND B-6B
ISSUED DEC 04, 2014
Printed in Vietnam
- 2 -
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish
of your product. Protect the surface of the product with cloth if you are using any product
with rubber feet or base.
PART LIST B – 6-SHELF
When unpacking, please be careful not to discard any parts with the packaging. Before
continuing, please make sure you have the following parts.
NO Description Qty Sketch NO Description Qty Sketch
I Center shelf 1
BEFORE ASSEMBLY
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED

ITEM NO : B-6-SHELF AND B-6A AND B-6B
ISSUED DEC 04, 2014
Printed in Vietnam
- 3 -
HARDWARE LIST B – 6-SHELF
When unpacking, please be careful not to discard any parts with the packaging. Before
continuing, please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
12 Screw
(M3.5 x15mm) 4
13 Shelf support
bracket 4
NOTE: HARDWARE IS PACKED IN CARTON B – 6-SHELF
Insert brackets (13) into the unit as shown below. Place shelf (I) on the brackets and attach with screws
(12). Tighten with a screwdriver.
STEP 1