Unfinished Furniture of Wilmington T-4084S User manual

ITEM
NO
:
T
-
40
84
S
ISSUED
MAY
29
, 201
4
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: 40X84 TABLE WITH SHAKER LEGS
: T-4084S

ITEM
NO
:
T
-
40
84
S
ISSUED
MAY
29
, 201
4
Printed in Vietnam
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children
-
PART
LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Table top 1 B Legs
4
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1 Hexagon nut
(M8x13mm) 8
3
Lock washer
(ɸ8.5x13mm)
8
2
Flat washer
(ɸ8.5x19mm)
8
4
Wrench
(13mm) 1

ITEM
NO
:
T
-
40
84
S
ISSUED
MAY
29
, 201
4
Printed in Vietnam
- 3 -
STEP 1
Attach the legs (B) to the Top (A) with washers (2) and (3) and nuts (1), as shown below. Tighten with
the wrench (4).