unidrain Reframe 7142 User manual

MOUNTING & USER INSTRUCTIONS
www.unidrain.com/reframe
Cleaning & Maintenance
Always spray detergents on a cloth and not
directly on the product, and rinse the surface
thoroughly with water afterwards. Residues
from basic detergents that are not washed off
with water may cause damage to the surface.
Do not use detergents containing strong acids
or chemicals such as iodine, chlorine, fluorine,
bromine and hydrogen peroxides. These
chemicals can cause damage to the protective
layer of the product.
For maintenance we recommend using a gentle
care product for stainless steel. Always rub
brushed steel in the direction of the brush lines.

45˚
45˚
1
3
2
4
REFILL
3
max refill
level
Press up to release
lock with the short
end of the allen key.
Add sleeve
before screw(2)
is added again
3
1
4
2
Remove screw
whith the long end
of the allen key.
SOAP DISPENSER
WALL MOUNTED
DISSAMBLY
1
Bit torx 20
Drill size: Ø 6mm
2ASSEMBLY
IMPORTANT
We recommended to use
the long end of the allen key
to avoid the risk of bending
the soap dispenser by tightening
the screws too much.
18mm
2 13