UNIONCOMMUNITY VIRDI 3000 User manual
Copyright 2006 By Union Community Co., Ltd.
VIRDI 3000 TM User’s Manual
Version eng-1.00
VIRDI 3000
TM User’s Manual 2
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
Disclaimers
Information in this document is provided in connection with UNION COMMUNITY
products. No license, express or implied, by estoppels or otherwise, to any
intellectual property rights is granted by this document. Except as provided in UNION
COMMUNITY’s Terms and Conditions of Sale for such products, UNION
COMMUNITY assumes no liability whatsoever, and UNION COMMUNITY disclaims
any express or implied warranty, relating to sale and/or use of UNION COMMUNITY
products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright or other intellectual property
right.
UNION COMMUNITY products are not intended for use in medical, life saving, life
sustaining applications, or other applications in which the failure of the UNION
COMMUNITY product could create a situation where personal injury or death may
occur. Should Buyer purchase or use UNION COMMUNITY products for any such
unintended or unauthorized application, Buyer shall indemnify and hold UNION
COMMUNITY and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that
UNION COMMUNITY was negligent regarding the design or manufacture of the part.
UNION COMMUNITY reserves the right to make changes to specifications and
product descriptions at any time without notice to improve reliability, function, or
design. Designers must not rely on the absence or characteristics of any features or
instructions marked "reserved" or "undefined." UNION COMMUNITY reserves these
for future definition and shall have no responsibility whatsoever for conflicts or
incompatibilities arising from future changes to them.
Please contact UNION COMMUNITY, local UNION COMMUNITY sales
representatives or local distributors to obtain the latest specifications and before
placing your product order.
About UNION COMMUNITY
With regard to any fingerprint-related issues, UNION COMMUNITY is always in
readiness to find out well fitted solutions, depending on customers’ requirements and
needs.
As a leading provider of fingerprint core technology, UNION COMMUNITY has set up
wide variety of fingerprint product lines from fingerprint OEM modules to several
choices of fingerprint finished products including access control, time & attendance,
door lock, PC peripherals, safety box, etc, that incorporate UNION COMMUNITY’s
groundbreaking biometrics technology. Based on its proprietary algorithm, its own
VIRDI 3000
TM User’s Manual 3
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
sensor and in-house one-stop processing capability regarding hardware, software,
product design, etc., our services to government sector and various commercial
sectors like security, construction and enterprise are in full swing through fast
problem-solving approach to meet market trends or demands. As a result, UNION
COMMUNITY exports its market-proven fingerprint products to over 40 countries
including Japan, USA, Europe and China.
As the biggest and the most promising company in the commercial sector of
biometrics industry in Korea, UNION COMMUNITY was awarded “Korean World-
class Product Award” for its excellent performance by Minister of Commerce,
Industry and Energy in December 2005.
To be the world-class company in biometrics field, UNION COMMUNITY and all the
members continue to do all-out efforts for the world-best quality product, creation of
new paradigm and customers’ satisfaction through accumulated expertise and
working experience from various reference sites and versatile hardware & software
development.
About This Manual
This is an introduction to operation of VIRDI 3000 series supplied by UNION
COMMUNITY. This manual describes how to do user registration in local terminal,
terminal settings, network settings, etc. The purpose of this manual is to provide
instructions on using VIRDI 3000 series and troubleshooting minor problems.
VIRDI 3000
TM User’s Manual 4
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
< Glossary>
zAdmin, Administrator
-As a user who can enter into the terminal menu mode, he can
register/modify/delete terminal users and change the operating environment
by changing settings.
-If there is no administrator for a terminal, anyone can change the settings. In
this regard, it is recommended to register at least one administrator.
-Caution is required with registration and operation because an administrator
has the right to change critical environmental settings of the terminal.
z1 to 1 Verification
-A user’s verification fingerprint (template) is compared to the user’s enrollment
fingerprint (template) previously registered. The terminal performs 1:1
matches against the user’s enrolled template until a match is found.
-It is called 1 to 1 Verification because only the fingerprint registered in the
user’s ID or card is used for comparison.
z1 to N Identification
-The terminal performs matches against multiple fingerprints (templates) based
solely on fingerprint information.
-Without the user’s ID or card, the user’s fingerprint is compared to fingerprints
previously registered.
zI-Capture (Intelligent Capture)
-Reinforces detection capability for residual fingerprints (fingerprints left on a
sensor window due to sweat or contaminants on a finger) and automatically
adjusts sensor settings to detect good-quality fingerprints regardless of the
conditions (dry or wet) of the fingerprints.
zAuthentication level
-Depending on the fingerprint match rate, it is displayed from 1 to 9.
Authentication is successful only if the match rate is higher than the set level.
-The higher the Authentication level, the higher the security. However, it
requires a relatively high match rate, so Authentication is vulnerable to failure.
-1:1 Level: Authentication level used for 1:1 verification
-1:N Level: Authentication level used for 1:N identification
zAuthentication Method
-Various kinds of authentication including FP (fingerprint) authentication, PW
(password) authentication, RF (card) authentication, or a combination of these
methods
-Ex) FP|PW: fingerprint or password authentication; password is used for
authentication if fingerprint authentication fails
VIRDI 3000
TM User’s Manual 5
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
zFunction keys
-[F1], [F2], [F3], [F4], [ENTER] are used, and they are used for direct
authentication and each key represents each authentication mode.
VIRDI 3000
TM User’s Manual 6
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
Table of Contents
< Glossary>...............................................................................................................4
Table of Contents .....................................................................................................6
1. Before use.............................................................................................................8
1.1. Safety precautions ......................................................................................8
1.2. Terminal description ...................................................................................9
1.3. Button description ......................................................................................9
1.4. Operation screen description...................................................................10
1.5. Voice information during operation......................................................... 11
1.6. Buzzer sound during operation ............................................................... 11
1.7. LED signal during operation .................................................................... 11
1.8. Correct fingerprint registration and input methods...............................12
2. Introduction ........................................................................................................14
2.1. Features .....................................................................................................14
2.2. Configuration.............................................................................................16
2.2.1. Network configuration......................................................................... 16
2.2.2. Standalone configuration .................................................................... 16
2.3. Specifications............................................................................................17
3. Device configuration settings...........................................................................18
3.1. Check items before device configuration settings.................................18
3.1.1. Entering menu .................................................................................... 18
3.1.2. Changing setting parameters ............................................................. 18
3.1.3. Saving device configuration settings .................................................. 19
3.2. Menu configuration...................................................................................20
3.3. User account..............................................................................................22
3.3.1. User registration ................................................................................. 22
3.3.2. Deleting User...................................................................................... 27
3.3.3. Modifying User ................................................................................... 27
3.3.4. Administrator registration.................................................................... 30
3.3.5. Deleting All Users ............................................................................... 30
3.4. Network settings .......................................................................................31
3.4.1. Terminal ID settings............................................................................ 31
3.4.2. Connection [NS / SN / NO] mode settings.......................................... 31
3.4.3. Connection configuration settings ...................................................... 32
3.4.4. IP address settings ............................................................................. 32
3.4.5. Subnet mask settings ......................................................................... 33
3.4.6. Gateway settings................................................................................ 33
3.4.7. Server IP settings ............................................................................... 33
3.4.8. Server port settings ............................................................................ 34
3.5. Option settings..........................................................................................35
3.5.1. Application mode settings................................................................... 35
3.5.2. Option settings for authentication ....................................................... 37
3.5.3. Doorlock settings................................................................................ 39
3.5.4. Volume settings .................................................................................. 41
3.5.5. Current time settings .......................................................................... 42
VIRDI 3000
TM User’s Manual 7
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
3.5.6. Other Setting ...................................................................................... 43
3.6. Terminal information view........................................................................44
3.7. Extra functions..........................................................................................45
3.7.1. Terminal lock settings ......................................................................... 45
3.7.2. Reading card number......................................................................... 45
3.8. Device settings..........................................................................................46
3.8.1. System configuration settings............................................................. 46
3.8.2. Function key settings.......................................................................... 47
3.8.3. Card reader settings........................................................................... 47
3.8.4. Fingerprint sensor settings ................................................................. 48
3.8.5. Wiegand output settings..................................................................... 49
3.8.6. Terminal initialization .......................................................................... 50
4. How to use the terminal.....................................................................................52
4.1. Access control...........................................................................................52
4.1.1. Authentication mode........................................................................... 52
4.1.2. [1:1] fingerprint authentication ............................................................ 53
4.1.3. [1:N] fingerprint authentication............................................................ 54
4.1.4. Password authentication .................................................................... 55
4.1.5. Card authentication ............................................................................ 56
4.1.6. User ID group authentication.............................................................. 57
4.1.7. Multiple fingerprint authentication....................................................... 58
4.2. Time & Attendance control.......................................................................59
4.2.1. Authentication mode........................................................................... 59
4.2.2. [1:1] fingerprint authentication ............................................................ 59
4.2.3. [1:N] fingerprint authentication............................................................ 60
4.2.4. Password authentication .................................................................... 60
4.2.5. Card authentication ............................................................................ 60
4.2.6. User ID group authentication.............................................................. 60
4.2.7. Expansion of working mode by multi-key function.............................. 60
4.3. Meal control...............................................................................................61
4.3.1. Meal classification .............................................................................. 61
4.3.2. [1:1] fingerprint authentication ............................................................ 62
4.3.3. [1:N] fingerprint authentication............................................................ 62
4.3.4. Password authentication .................................................................... 62
4.3.5. Card authentication ............................................................................ 62
4.3.6. User ID group authentication.............................................................. 62
4.3.7. Double authentication......................................................................... 62
VIRDI 3000
TM User’s Manual 8
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
1. Before use
1.1. Safety precautions
zWarning
Handling with wet hands or
allowing liquid to flow into it
is prohibited.
-> It may cause an
electric shock or damage.
Do not place a fire source
near the terminal.
-> It may cause a fire.
Do not disassemble, repair,
or modify the terminal at
discretion.
-> It may cause an electric
shock, fire or damage.
Keep out of reach of
children.
-> It may cause an
accident or damage.
-If the above warning is ignored, it may result in death or serious injury.
zCaution
Keep away from direct
sunlight
-> It may cause
deformation or color
change.
Avoid high humidity or
dust
-> The terminal may be
damaged.
Avoid using water,
benzene, thinner, or
alcohol for cleaning
-> It may cause an electric
shock or fire.
Do not place a magnet
close to the terminal.
-> The terminal may
break down or
malfunction.
Do not contaminate the
fingerprint input area.
-> Fingerprints may not be
well recognized.
Avoid using insecticide or
flammable spray near the
terminal.
-> It may result in
deformation or color
change.
Avoid impacts or using
sharp objects on the
terminal.
-> The terminal may be
damaged and broken.
Avoid severe temperature
changes
-> The terminal may be
broken.
- If the above cautions are ignored, it may result in property loss or human injury.
※Under no circumstances will UNION COMMUNITY be responsible for accidents or damages
caused by inappropriate use of the product without referring to the user manual.
VIRDI 3000
TM User’s Manual 9
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
1.2. Terminal description
1.3. Button description
Visitors use this to ring the doorphone bell
Use after entering the settings when configuring the terminal
environment
Speaker :
explanation of operation
status and communication
with doorphone
Fingerprint input window :
Window for fingerprint input
LCD display window :
Display character message for
all the operations
Card input position
: Option
Mic :
Connect to doorphone
Ke
yp
ad : Enter numbers for environment settin
g
or authentication ID in
p
ut
LED Lamp : terminal operation status
¾PWR : ON when VIRDI 3000 is under normal operation
¾DOOR: Yellow LED is on when successful authentication makes electronic door
open/close unit open. Red LED is on when terminal cover is opened.
start
leave
outside work
come back to company
Clear typo when entering settings
Move up to higher menu
Use when escaping from menu setting
Enter ‘0’ or LCD menu scroll
Terminal menu setting
(Enters into menu mode
for terminal menu setting
when pressed over 2 seconds.)
VIRDI 3000
TM User’s Manual 10
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
1.4. Operation screen description
== 00:00
- Initial screen
== 00:00
- Waiting for a user’s ID to be input
== 00:00
- Fingerprint input
== 00:00
- Password input
== 00:00
- Successful authentication
== 00:00
- Authentication failed
== 00:00
- When a non-registered user ID is entered
- When connection mode is SN and 1:N identification
is tried even though there is no user allowed for
1:N identification
== 00:00
- When the terminal is under meal control mode and
a user tries more than two time authentication
during the same mealtime
== 00:00
- There is no response from the server during the
authentication process.
- Network to server is disconnected during the
authentication process.
ÆÅ 00:00
- There is no user registered on the terminal or no
connection to the server, so it is trying to connect.
== connected to network server
ÆÅ disconnected to network server
Access mode display in case of access control ( F1, F2, F3, F4 )
T&A mode display in case of time & attendance control( START, LEAVE, OUT, BACK,
NORMAL )
Successful authentication number for mealtime in case of meal control ( MENU-1, MENU-2,
MENU-3, MENU-4 )
== START 00:00
current time
information message
VIRDI 3000
TM User’s Manual 11
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
== 00:00
- Waiting for card to be input
== 00:00
- A registered user tried authentication at that time
when access is not allowed.
== 00:00
- Waiting for a reply from the server for
authentication
== 00:00
- Terminal is locked
- It is not mealtime in case of meal control mode
== 00:00
- Terminal program is in upgrade
(Power must not turn off when this message is
displayed.)
1.5. Voice information during operation
“Please enter your fingerprint” Enter fingerprint using the fingerprint input
window
“You are authorized” Successful authentication
“Please try again” Authentication failed
1.6. Buzzer sound during operation
“ppig”
When a button is pressed or a card is being read
When fingerprint input is completed and user is allowed to
take off his fingertip
“ppibig” Authentication is failed or wrong user fingerprint input
happened
“ppiriririck” Waiting for fingerprint input
“ppiririck” Authentication is successful or settings for the current user
are completed
1.7. LED signal during operation
PWR ●Power On/Off
DOOR ●
[Two color LED] ●
Shows door status like Open or Close. When door is
open, it(green) is on.
Shows terminal status. When terminal cover is open,
it(red) is on.
VIRDI 3000
TM User’s Manual 12
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
1.8. Correct fingerprint registration and input methods
zCorrect fingerprint registration methods
Place your index finger on the window just as you do with a finger stamp.
Finger tip touching is not an appropriate registration or input method.
Make sure the center of your finger touches the window.
zUse your index finger, if possible.
As usual, the index finger guarantees an accurate and stable fingerprint input.
zCheck if your fingerprint is unclear or damaged.
It is tricky to recognize fingerprints on dry, wet, unclear, or injured fingers.
Use another finger in this case.
VIRDI 3000
TM User’s Manual 13
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
zCautions about fingerprint condition
Depending on the user’s fingerprint condition, some fingerprints may not be
used or may cause an inconvenience.
¾If the fingerprint is damaged or very unclear, then it cannot be recognized.
Please use a password instead in this case.
¾When a finger is dry, breathe on the finger for smooth operation.
¾For kids, it may be tricky or impossible to use the terminal because their
fingerprints are too small or very unclear. It is recommended to register
their fingerprints every six months.
¾For the elderly, it may not be possible to register their fingerprints if there
are too many fine lines on the fingerprints.
¾If fingerprints are very unclear, it may be convenient if you register 2~3
fingerprints.
¾It is recommended that you register more than 2 fingerprints.
VIRDI 3000
TM User’s Manual 14
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
2. Introduction
2.1. Features
zAccess control system using LAN
-Communication between the unit and authentication server is done through
a UTP cable and TCP/IP protocol, so an existing LAN can be used as it is.
It guarantees network-based administration and monitoring as well as easy
expansion, high reliability, and higher speed.
zConvenient Auto Sensing function
-Simple authentication process without any key input; simple fingerprint
touching is sufficient.
zSimple authentication using fingerprints
-Fingerprint authentication technology prevents users from forgotten
password or card, stolen key or card, etc., which is one of good ways to
improve security level.
zHigh processing capacity of terminal and server
-There is not any limit on management of users’ access information in case
that access server is used. Even in standalone operation by using local
terminal, it is possible to manage fingerprint authentication of more than
8,000 users (in optional case).
zVarious information messages
-It ensures easy fingerprint recognition because voice and LCD window
information are provided during the authentication process. In addition, the
backlight installed in the LCD window helps with easy key operation in the
dark.
zOptional doorphone
-Easy visitor identification and convenient response.
zVarious and flexible access controls
-No risk of rent, forgery, or loss of keys or cards
-Perfect control by assigning different security clearances to each user or
group
-Flexibility provided by allowing limited time for entry/exit
-Low maintenance
-No need to issue visitor card for visitor
zVarious applications including access control, time & attendance, meal control,
etc.
-Various operation modes depending on the terminal menu settings
VIRDI 3000
TM User’s Manual 15
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
zVarious registration and authentication methods
-There are a total of 11 registration and authentication methods (4 methods
if the card reader is not installed), so you are required to select one method
before registering users and an administrator.
FP Fingerprint registration
Fingerprint authentication
ID&PW Password registration
Password authentication after ID input
FP|PW Fingerprint and password registration
Fingerprint or password authentication
FP&PW Fingerprint and password registration
Password authentication after fingerprint authentication
RF Card registration
Card authentication
RF|FP Card and fingerprint registration
Card or fingerprint authentication
RF&FP Card and fingerprint registration
Fingerprint authentication after card authentication
RF|PW Card and password registration
Card or password authentication
RF&PW Card and password registration
Password authentication after card authentication
ID&FP|RF&FP Card and fingerprint registration
Fingerprint authentication after ID input or fingerprint
authentication after card authentication
ID&PW|RF&PW Card and password registration
Password authentication after ID input or password
authentication after card authentication
VIRDI 3000
TM User’s Manual 16
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
2.2. Configuration
2.2.1. Network configuration
2.2.2. Standalone configuration
UTP
LET
UTP
WAN
TCP/IP
UTP
Switch Hub
4
3
562
643 2
2
13456 8
7
9
10 1112
2
643
12
2
6423
5
12 3
4
678
9
10111
2
T
x
R
x
1
T
x
R
x
2
Tx
R
x
1
Tx
R
x
21
2
3
T
x
R
x
1
T
x
R
x
2
641 3
4
T
x
R
x
1
T
x
R
x
2
1
6410
34
T
x
R
x
1
T
x
R
x
2
1
641
UTP
UTP
UTP
UTP
Network Server
(authentication server)
Doorphone
door lock system
VIRDI 3000
VIRDI 3000
TM User’s Manual 17
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
2.3. Specifications
ITEM SPEC REMARK
CPU 32-Bit RISC CPU (266MHz)
8M SDRAM
4M FLASH (Default) 3,520
fingerprints
MEMORY
8M FLASH (Option) 8,160
fingerprints
Fingerprint sensor Optical
Authentication speed <1 sec.
Scan Area / Resolution 12.9 * 15.2mm / 500 DPI
FRR / FAR 0.1% / 0.001%
TCP/IP, RS-232, Wiegand
Communication Port RS-485 (Option)
Temperature / Humidity -10~50 /
Lower than 90% RH
LCD 122 X 32 Graphic LCD
SIZE 137 X 137 X 50mm
INPUT: Universal AC 100~250V
OUTPUT: DC 12V (Option: DC 24V)
AC / DC Adapter
UL, CSA, CE Approved
RF Card Reader EM Card,
125kHz
Smart Card Reader A-type,
13.56MHz
Options
Door phone
VIRDI 3000
TM User’s Manual 18
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
3. Device configuration settings
3.1. Check items before device configuration settings
3.1.1. Entering menu
The following screen appears when the [Fn] button is pressed for over 2 sec.
1. User
2. Network
3. Option
4. Terminal Info
Press [0] to view menus not shown in
the LCD window.
Press a number key in order to go submenu. The following administrator
authentication allows for entry of submenu.
<Input AdminID>
ID: 0001
Press [ENTER] after entering the administrator’s ID, and the administrator
authentication is processed according to the previous setting such as fingerprint
authentication or password authentication. If the authentication succeeds,
submenu screen appears.
Administrator authentication is required only once for all in main menu, so all※
other menus are accessible until he/she completely exits from the main
menu.
3.1.2. Changing setting parameters
To change setting parameters, press the [CLR] button to delete old values and
input new values.
Press [0] to see menus not shown in the LCD window, and press the
corresponding number to select a menu.
Press [ENTER] for confirmation of setting parameter or to move to the next
setting, and press the [CLR] button to move to upper menus.
Hold the [CLR] button for over 2 sec. to cancel the current setting and move to
the upper menu.
VIRDI 3000
TM User’s Manual 19
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
3.1.3. Saving device configuration settings
Press the [CLR] button in the main menu to save device configuration settings.
The following screen appears
Save?
[Y=1/N=2]:_
Press [1] to save changes. If not, press [2].
¾If there are no changes in device configuration settings, it goes out of this
setting mode without going through the above screen.
¾If there is no input for a certain period of time while changing the device
configuration settings, the setting process finishes. If there are changes in
device configuration settings, the above screen “Save?” appears. If not, it
goes out of this setting mode and the initial screen appears.
VIRDI 3000
TM User’s Manual 20
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
3.2. Menu configuration
1. User 1. Add
2. Delete
3. Modify
4. Add Admin
5. Delete All
2. Network 1) Terminal ID
2) Mode [NS/SN/NO]
3) Network Type [Static IP/DHCP]
4) IP Address
5) Subnet Mask
6) Gateway
7) Server IP
8) Server port
1. Application
[Access/Time Attendance
/Meal]
<Application>
<Start Time>
<Leave Time>
<Normal Time>
<Multi Fn-Key>
2. Verify Option <Show User ID>
<Auto Enter Key>
<Only Card>
<Enable 1:N>
<User ID Group>
<Verify Multi-FP>
3. Set Doorlock
<Door Monitor>
<Open Duration>
<Door Open Alarm>
4. Sound Control <Use Voice>
<Beeper Volume>
<Case Open Alarm>
5. Time Setting
3. Option
6. Other Setting <LCD Backlight>
Table of contents
Other UNIONCOMMUNITY Security System manuals
