Unitech PA600 II Standard User manual

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
PA600 II Mobile Computer
- PA600 II -
Unitech is a member of
Oracle Embedded Software Licensing Program
Quick Reference Guide

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
PA600 II Components
1
Status indicator
11
Reset button
2
Speaker
12
Hand strap
3
Power button
13
Speaker
4
Microphone
14
Strap holder
5
Keypad
15
Memory card slot
6
Universal connector
16
Bar code scanner window
7
LCD touch-screen
17
Headphone jack
8
Left scanner trigger button
18
Stylus
9
Battery compartment
19
Right scanner trigger button
10
Battery compartment latch
20
Infrared port
8

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
After you have charged your device for 12 hours, the device is ready to be
used. You can now start up the device and begin by calibrating the display,
learning how to use the stylus, and setting up the system’s date and time.
Turn on your device by pressing the power button
on the front panel.
Installing the battery
1. Open the battery compartment by pushing the latch in the direction of the
arrow and lifting up.
2. Position the battery pack, making sure the
battery contacts are aligned with the contacts in
the compartment and the battery is placed on top
of the plastic tab, as shown in the following
illustration.
3. Slide the battery pack into the battery bay while
simultaneously pulling the plastic tab and securing
clip until the battery clicks into place.
4. Replace the battery compartment cover.
Turning on the PA600 II for the first time
Power ON Button
Compartment contacts
Plastic battery tab
Battery securing clip
Plastic tab
Securing clip

Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Keypad and Function Buttons
When the Function button is pressed, an
icon appears on the desktop.
Function activated icon
1
Turns the PA600 II ON and OFF.
11
Function key
2
Number 1, Left soft key
12
Tab, Windows open
3
Alphanumeric- 2, A, B, C, Up
key
13
Alphanumeric- 7, P, Q, R, S,
Brightness down
4
Alphanumeric- 3, D, E, F, Right
soft key
14
Alphanumeric- 8, T, U, V, Down
key
5
Enter key, OK
15
Alphanumeric- 9, W, X, Y, Z,
Brightness up
6
Backspace, Escape key
16
Alpha
7
Alphanumeric- 4, G, H, I, Left
key
17
Asterisk, Illuminates keypad
8
Alphanumeric- 5, J, K, L
18
Number 0, Space key
9
Alphanumeric- 6, M, N, O, Right
key
19
Period, Pound
10
Up button
20
Down button