UNITED SFH-1170 User manual

For any help, kindly consult the local distributor
MOUNTING METHOD
Fix the safe in the place which is not easy to move.
● Drill holes for expansion bolts (or clamping screws) in the right place.
● Turn the expansion bolts counter clockwise to separate.
● Use the expansion bolts (or clamping screws) to secure the case to the wall.
● Make sure the case is mounted in place as required and then tighten all screws.
CAUTION:Use the expansion bolt when there is a concrete wall surface. Use the
clamping screw when there is a wooden wall surface.
12 3
5. Emergency Lock Cover
6. Start button
7. Power Supply: 4 AA batteries
1. Bolts
2. Reset Button
3. Battery Compartment
4. Knob (Master Key)
7
Please do not keep emergency keys in your safe!
MODEL: SFH-1170
INTELLIGENT ELECTRONIC LOCK SAFE
Dear valued customer:
Thank you for choosing our products! You’ve taken an important step in
organizing and protecting your most valued possessions. Every series of our
safes is professionally made and designed to provide safety. Please take
time to read and familiarize yourself with the proper operating procedures of
your new safe presented on the following pages.
Again, thank you for choosing our products!
Schematic drawing of case
Schematic drawing of control panel
NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste. Please dispose of this equipment
at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and electronic
products. Please help us to conserve the environment we live in!
Declaration of Conformity
Herewith, Amiridis-Savidis S.A. states that product SFH-1170, complies with the
requirements of below directives:
EMC Directive 14 / 30 / EU,
RoHS Directive 11 / 65 / EU & 15 / 863 / EU
CE-marking Directive 93 / 68 / EEC
The detailed declaration of conformity can be found at www.united-electronics.gr
EXCLUSIVE IMPORTER IN GREECE:
Amiridis – Savvidis S.A.
87A, 17th Noemvriou str, P.C. 55534 Thessaloniki – Greece
T: [phone] | F: [phone]
www.amiridis-savvidis.gr

OPENING YOUR SAFE FOR THE FIRST TIME
Upon irst opening, users should open the safe with the emergency key. The operation
in details refers to “opening the safe with the emergency key”.
● Remove emergency lock cover, then insert the emergency key, and turn it count
clockwise.
● Turn the knob (master key) clockwise to open the door.
CAUTION: Finish operation, pull out the emergency key and keep it in a safe
place.
● Turn the knob (master key) counter clockwise to close the door.
CLOSING DOOR
OPENING DOOR
● Press “START” button, and the LED display will show “----”
● Input your user code (6 digits), The code lock will be unlocked with the green light
on the key pad.
● Turn the knob (master key) clockwise and open the door.
CAUTION: The user preset code “123456”.The code lock has the function of
auto-locking, and if there is not any operation after inputting the code, the lock will
lock automatically again. If inputting wrong code for three times, the lock will lock
automatically for 3 minutes.
● With the door open, press “START” button, the LED display will show “----”.
● Input your new user code(6 digits), and press the “RESET” button to conirm.
● The display will show “USER-IN” to indicate the code setting is successful. So now
you can use your safe box by new code.
● With the door open, press the “RESET” button, the LED display will show “----”.
● Then press the “START” button, and “----”on the LED display will stop lashing,
which indicate the lock has enter into the state of code setting.
● Input any 6 digits code, LED display will show “SUPER-IN”
● The display will show “SUPER-IN” to indicate the master code setting is successful.
So now you can use your safe box by new code.
SETTING THE USER CODE
SETTING THE MASTER CODE
INSERTING THE BATTERIES
● Open the door.
● Insert 4AA batteries into the battery compartment.
● Under normal condition, if the LED display shows “LO-BAT”, you should change the
batteries after entering “START” button.
CAUTION: Replace 4 fresh batteries by lining them up in a manner as indicated by
the “+“ and “ - ” signs. When outage for thirty minutes or longer, you should reset the
user code.
OPENING THE SAFE IN EMERGENCY
Upon first receipt of the safe, or either the electronic circuit malfunction or codes
unknown. You could also use the emergency key to open the safe.
● Remove the cover of the emergency lock.
● Insert the emergency key to the key hole, turn count clockwise then turn the knob
,
(master key) clockwise to open the door.