Universal Electronics Millenium 4 User manual

MILLENNIUM™4
Universal Remote Control
User’s Guide
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 1

TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features And Functions . . . . . . . . . . . . . . . . . . . . . . 4
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Programming TV Control . . . . . . . . . . . . . . . . . . . . . 8
Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . 8
Programming VCR/DVD Player Control. . . . . . . . 12
Setup Codes for VCRs. . . . . . . . . . . . . . . . . . . . . . 13
Setup Codes for DVD Players. . . . . . . . . . . . . . . . . 15
Programming TV/VCR Combo Control . . . . . . . . 16
Setup Codes for TV/VCRs . . . . . . . . . . . . . . . . . . . 17
Programming Cable Converter
(or DBS Receiver) Control . . . . . . . . . . . . . . . . . . . 18
To Unlock the CBL Key. . . . . . . . . . . . . . . . . . . . . . 18
To Program the CBL Key . . . . . . . . . . . . . . . . . . . . 19
To Lock the CBL Key . . . . . . . . . . . . . . . . . . . . . . . 20
Setup Codes for Cable Converters. . . . . . . . . . . . . 20
Setup Codes for DBS Receivers. . . . . . . . . . . . . . . 20
Programming Channel Control Lock . . . . . . . . . . 21
To Activate Channel Control Lock . . . . . . . . . . . . . 21
To De-Activate Channel Control Lock. . . . . . . . . . . 21
Programming Audio Control . . . . . . . . . . . . . . . . . 22
Setup Codes for Audio Amplifiers . . . . . . . . . . . . . 22
Setup Codes for Audio Receivers. . . . . . . . . . . . . . 23
Searching For Your Code . . . . . . . . . . . . . . . . . . . . 24
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . 25
Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . 26
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . 27
To Change Volume Lock to the Cable Mode . . . . . . 27
To Change Volume Lock to the TV Mode. . . . . . . . . 27
To Change Volume Lock to the VCR Mode . . . . . . . 27
To Change Volume Lock to the Audio Mode . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Additional Information . . . . . . . . . . . . . . . . . . . . . . 30
2
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 2

INTRODUCTION
The Universal Electronics Millennium™ 4 is our latest
generation universal remote control. It is designed with
sophisticated technology that will allow you to finally
consolidate the clutter of all of the original remote controls
in your home entertainment system.It’s packed with easy-
to-use features such as:
• Preprogrammed to operate the cable converter
supplied by your cable system provider
•Preprogrammedtechnologyforeasysetup
• Convenient hide-away sliding door to conceal
less-used functions
• Color-coded keys to quickly locate popular functions
• Cable ID Lock to lock your remote control for use only
with the cable converter
• Channel Lock to lock channel selection only to the
cable converter
• Code library for video and audio components
• Code Search to help program control of older or
discontinued components
Before you can use your new remote control, you will
need to program it to operate the specific home enter-
tainment components you wish to control. Follow the
instructions detailed in this manual to set up your
Millennium 4 and enjoy your new remote control.
3
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 3

FEATURES AND FUNCTIONS
Use the illustration below to locate Millennium 4 features
and then study the Key Charts (on the next two pages) to
learn how they function.
4
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 4

Key Charts
The LED (red light) blinks to show that
the remote control is working and is
sending signals.
Press AUDIO,VCR,TV,orCBL once
to select a home entertainment
component to control.
Press POWER once to turn on or off
the selected home entertainment
component.
Use SETUP for all programming
sequences.
Use the keypad (0~ 9) to directly select
channels (e.g.,09 or 31).
Press MUTE once to turn sound off
or on.
Press ENTER once after entering channel
numbers on some TV models.
Use VOL+ (or VOL-) to raise (or lower)
the sound volume.
Use CH+ (or CH-) to select the next
higher (or lower) channel.
Press LAST once to recall the last channel
and to page back one screen in the
main menu.
Use FAV to cycle through your favorite
channels that are stored in your cable
converter.
Use GUIDE to display the program guide.
Press PPV/LOCK once to display the pay
per view menu or to lock out a specific
channel on your cable converter.
Use EXIT to exit out of your cable
converter’s menu and guide.
continued on next page...
5
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 5

FEATURES AND FUNCTIONS
Key Charts (continued)
Use cursor keys to move the cursor in
the program guide and menu screens.
Use SELECT/OK to choose options, PPV
events,and to tune programs from the
program guide.
Use INFO to display current channel and
program information.
Press MENU once to display your cable
converter’s screen menu.
Use PAGE ▲▲(or PAGE ▼▼) to page up
or down) through menu screens and the
program guide.
Slide the door open to reveal less-often
used keys such as VCR transport buttons
and cable converter features.
In the VCR and TV modes, use the REW,
PLAY,FF,REC,STOP,andPAUSE keys to
control your VCR. To record a program,
press REC twice.
Reserved for cable converter features
(see your cable converter manual).
Press TV/VCR once to switch the VCR to
view TV channels or tape. This key will
also control the input select feature on
most TVs.
6
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 6

INSTALLING BATTERIES
1. On the back of the Millennium 4, push the tab
and lift off the battery cover.
2. Obtain two (2) fully-charged AA alkaline
batteries. Match the + and – marks on the
batteries to the + and – marks in the battery
case, then insert the new batteries.
3. Press the battery cover back into place. The tab
should click when the cover is locked.
4. Test the unit by pressing POWER and any mode
key (e.g. AUDIO,VCR,TV,orCBL). If the batteries
are inserted correctly, the LED will blink once.
NOTE: Whenever batteries need replacement, the Millennium 4
will blink twice with every key press. Simply replace the batteries
and the Millennium 4 will be restored to its full functionality,
complete with your favorite settings.
7
❶
❸
❷
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 7

PROGRAMMING TV CONTROL
NOTE: If you own a TV/VCR combination, skip this section and
perform “Programming TV/VCR Combo Control” on page 16.
Locate the brand name of your TV in the Setup Codes
for TVs in the next section, and write it in the space below.
TV Brand: __________________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes
to program the Millennium 4 to operate your TV:
1. Turn on the TV.
2. On the Millennium 4, press TV once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your TV. If
you perform this procedure correctly, the LED
will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Millennium 4 at your TV and press
POWER once.The TV should turn off.If it does
not, repeat steps 2 and 3, trying each code for
your brand until you find one that works.If it
still does not work, try searching for the code
(see Searching For Your Code on page 24).
5. For future reference, write your TV code in the
boxes below.
NOTE: Remember, to use the Millennium 4 to operate your TV,
press TV first.
Setup Codes for TVs:
AOC 0030, 0019
Admiral 0093, 0463
Aiko 0092
Akai 0030
Alaron 0179
America Action 0180
Anam 0180
Audiovox 0451, 0180, 0623, 0092
Baysonic 0180
8
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 8

Belcor 0019
Bell & Howell 0154, 0016
Bradford 0180
Brockwood 0019
Broksonic 0236, 0463
CXC 0180
Candle 0030, 0056
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451, 0092
Citizen 0060, 0030, 0056, 0092, 0280
Concerto 0056
Contec 0180
Craig 0180
Crosley 0054
Crown 0180
Curtis Mathes 0047, 0747, 0054, 0154, 0051, 0451, 0093, 0060, 0030, 0056,
0145, 0016, 0166
Daewoo 0451, 0019, 0623, 0624, 0092
Daytron 0019
Denon 0145
Dumont 0017, 0019
Electroband 0000
Emerson 0154, 0236, 0463, 0180, 0178, 0179, 0019, 0623, 0624, 0282,
0280
Envision 0030
Fisher 0154
Fujitsu 0179, 0683
Funai 0180, 0179, 0171
Futuretech 0180
GE 0047, 0747, 0051, 0451, 0093, 0178, 0021, 0282
Gibralter 0017, 0030, 0019
GoldStar 0030, 0178, 0056, 0019
Gradiente 0053, 0056
Grunpy 0180, 0179
Hallmark 0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard 0180
Hitachi 0056, 0145, 0016
Infinity 0054
Inteq 0017
JBL 0054
JCB 0000
JVC 0053
KEC 0180
KTV 0180, 0030, 0280
Kenwood 0030, 0019
Konka 0707, 0628, 0632, 0638, 0703
LG 0056
continued on next page...
9
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 9

PROGRAMMING TV CONTROL
Setup Codes for TVs (continued):
LXI 0047, 0747, 0054, 0154, 0156, 0178
Logik 0016
Luxman 0056
MGA 0150, 0030, 0178, 0019
MTC 0060, 0030, 0056, 0019
Magnavox 0054, 0030, 0179
Majestic 0016
Marantz 0054, 0030
Matsushita 0250
Megatron 0178, 0145
Memorex 0154, 0250, 0463, 0150, 0178, 0179, 0056, 0016
Midland 0047, 0747, 0017, 0051
Minutz 0021
Mitsubishi 0093, 0150, 0178, 0019
Motorola 0093
Multitech 0180
NAD 0156, 0178, 0166
NEC 0030, 0056, 0019
NTC 0092
Nikko 0030, 0178, 0092
Onwa 0180
Optimus 0154, 0250, 0166
Optonica 0093, 0165
Orion 0236, 0463, 0179
Panasonic 0051, 0250
Penney 0047, 0747, 0156, 0051, 0060, 0030, 0178, 0021, 0056, 0019
Philco 0054, 0463, 0030, 0145, 0019
Philips 0054
Pilot 0030, 0019
Pioneer 0166
Portland 0019, 0092
Prism 0051
Proscan 0047, 0747
Proton 0178
Pulsar 0017, 0019
Quasar 0051, 0250, 0165
RCA 0047, 0747, 0090, 0051, 0093, 0019, 0278
RadioShack 0047, 0747, 0154, 0180, 0030, 0178, 0056, 0019, 0165
Realistic 0154, 0180, 0030, 0178, 0056, 0019, 0165
Runco 0017, 0030
SSS 0180, 0019
Sampo 0030
Samsung 0060, 0030, 0178, 0056, 0019
Sansei 0451
Sansui 0463
Sanyo 0154
Scimitsu 0019
10
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 10

Scotch 0178
Scott 0236, 0180, 0178, 0179, 0019
Sears 0047, 0747, 0054, 0154, 0156, 0178, 0179, 0056, 0171
Semivox 0180
Semp 0156
Sharp 0093, 0688, 0165
Shogun 0019
Signature 0016
Sony 0000
Soundesign 0180, 0178, 0179
Squareview 0171
Starlite 0180
Supreme 0000
Sylvania 0054, 0030
Symphonic 0180, 0171
TMK 0178, 0056
TNCi 0017
Tandy 0093
Technics 0051, 0250
Technol Ace 0179
Techwood 0051, 0056
Teknika 0054, 0180, 0150, 0060, 0179, 0056, 0019, 0016, 0092
Telefunken 0056
Toshiba 0154, 0156, 0060
Vector Research 0030
Victor 0053
Vidikron 0054
Vidtech 0178, 0019
Wards 0054, 0030, 0178, 0021, 0179, 0056, 0019, 0016, 0165
White Westinghouse 0463, 0623, 0624
Yamaha 0030, 0019
Zenith 0017, 0463, 0624, 0016, 0092
11
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 11

PROGRAMMING VCR/DVD PLAYER CONTROL
NOTE: If you own a TV/VCR combination, skip this section and
perform “Programming TV/VCR Combo Control” on page 16.
Locate the brand name of your VCR in Setup Codes for
VCRs on the next page, or your DVD player in Setup Codes
for DVD Players on page 15, and write it in the appropriate
space below.
VCR Brand: ________________________________
or
DVD Player Brand: ____________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes
to program the Millennium 4 to operate your VCR or
DVD player:
1. Turn on your VCR and insert a video cassette,
or turn on your DVD player and insert a DVD.
2. On the Millennium 4, press VCR once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter the first four-digit code for your VCR or
DVD player. If you perform this procedure
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Millennium 4 at the VCR or DVD
player and press POWER once. The device
should turn off. If your VCR remote control
does not have a POWER key, press PLAY.Ifthe
VCR does not respond, repeat steps 2 and 3,
trying each code listed for your brand until you
find one that works.If the device still does not
work , try searching for the code (see Searching
For Your Code on page 24).
5. For future reference, write your device’s code
and type in the boxes and space below.
Device Type:________________________
NOTE: Remember, to use the Millennium 4 to operate your VCR
or DVD player, press VCR first.
12
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 12

Setup Codes for VCRs:
Admiral 0048, 0209
Adventura 0000
Aiko 0278
Aiwa 0037, 0000
Akai 0041
America Action 0278
American High 0035
Asha 0240
Audiovox 0037
Beaumark 0240
Bell & Howell 0104
Broksonic 0184, 0121, 0209, 0002, 0479, 0295
CCE 0072, 0278
Calix 0037
Canon 0035
Carver 0081
Cineral 0278
Citizen 0037, 0278
Colt 0072
Craig 0037, 0047, 0240, 0072
Curtis Mathes 0035, 0060, 0162, 0041
Cybernex 0240
Daewoo 0045, 0278, 0561
Denon 0042
Dynatech 0000
Electrohome 0037
Electrophonic 0037
Emerex 0032
Emerson 0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278, 0479, 0561,
0295, 0294
Fisher 0047, 0104
Fuji 0035, 0033
Funai 0000
GE 0035, 0060, 0048, 0240
Garrard 0000
Go Video 0432, 0526, 0643, 0232, 0279
GoldStar 0037
Gradiente 0000
HI-Q 0047
Harley Davidson 0000
Harman/Kardon 0081
Harwood 0072
Headquarter 0046
Hitachi 0000, 0042, 0041, 0105
Hughes Network Sys. 0042
JVC 0067, 0041
Jensen 0041
KEC 0037, 0278
KLH 0072
continued on next page...
13
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 13

PROGRAMMING VCR/DVD PLAYER CONTROL
Setup Codes for VCRs (continued):
Kenwood 0067, 0041
Kodak 0035, 0037
LXI 0037
Lloyd’s 0000
Logik 0072
MEI 0035
MGA 0240, 0043
MGN Technology 0240
MTC 0000, 0240
Magnasonic 0278
Magnavox 0035, 0039, 0081, 0000
Magnin 0240
Marantz 0035, 0081
Marta 0037
Matsushita 0035, 0162, 0454
Memorex 0035, 0037, 0048, 0039, 0047, 0162, 0000, 0240, 0104, 0209,
0454, 0479, 0046
Minolta 0042, 0105
Mitsubishi 0048, 0067, 0043
Motorola 0035, 0048
Multitech 0000, 0072
NEC 0067, 0104, 0041
Nikko 0037
Noblex 0240
Olympus 0035
Optimus 0037, 0048, 0162, 0104, 0454, 0432
Orion 0184, 0209, 0002, 0479, 0295
Panasonic 0035, 0225, 0162, 0454, 0616
Penney 0035, 0037, 0042, 0240
Pentax 0042, 0105
Philco 0035, 0209, 0479
Philips 0035, 0081, 0618
Pilot 0037
Pioneer 0067
Polk Audio 0081
Profitronic 0240
Proscan 0060
Protec 0072
Pulsar 0039
Quarter 0046
Quartz 0046
Quasar 0035, 0162, 0454
RCA 0035, 0060, 0048, 0042, 0240, 0105, 0060
RadioShack 0000
Radix 0037
Randex 0037
Realistic 0035, 0037, 0048, 0047, 0000, 0104, 0046
14
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 14

ReplayTV 0614, 0616
Runco 0039
STS 0042
Samsung 0045, 0240
Samtron 0643
Sanky 0048, 0039
Sansui 0000, 0067, 0209, 0041, 0479
Sanyo 0047, 0240, 0104, 0046
Scott 0184, 0045, 0121, 0043
Sears 0035, 0037, 0047, 0000, 0042, 0104, 0046, 0105
Semp 0045
Sharp 0048
Shintom 0072
Shogun 0240
Singer 0072
Sony 0035, 0032, 0000, 0636, 0033
Sylvania 0035, 0081, 0000, 0043
Symphonic 0000
TMK 0240
Tatung 0041
Teac 0000, 0041
Technics 0035, 0162
Teknika 0035, 0037, 0000
Thomas 0000
Tivo 0618, 0636
Toshiba 0045, 0043
Totevision 0037, 0240
Unitech 0240
Vector 0045
Video Concepts 0045
Videosonic 0240
Wards 0035, 0060, 0048, 0047, 0081, 0000, 0042, 0240, 0072
White Westinghouse 0209, 0072, 0278
XR-1000 0035, 0000, 0072
Zenith 0039, 0000, 0209, 0479, 0033
Setup Codes for DVD Players:
Aiwa 0641
Apex 0672
B & K 0655, 0662
Denon 0490, 0634
Fisher 0670
GE 0522
Gradiente 0651
Harman/Kardon 0582
Hitachi 0573, 0664
Hiteker 0672
JVC 0558, 0623
Kenwood 0534, 0682
continued on next page...
15
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 15

PROGRAMMING VCR/DVD PLAYER CONTROL
Setup Codes for DVD Players (continued):
Konka 0711, 0719, 0720, 0721
Magnavox 0503, 0675
Marantz 0539
Mitsubishi 0521
Onkyo 0503, 0627
Optimus 0571
Oritron 0651
Panasonic 0490, 0677, 0632, 0678, 0679
Philips 0503, 0539
Pioneer 0525, 0571, 0632
Proscan 0522
RCA 0522, 0571
Samsung 0573
Sharp 0630
Sherwood 0633
Sony 0533
Technics 0490
Techwood 0692
Theta Digital 0571
Toshiba 0503
Yamaha 0490, 0545
Zenith 0503, 0591
PROGRAMMING TV/VCR COMBO CONTROL
Locate the brand name of your TV/VCR Combo in Setup
Codes for TV/VCR Combos on the next page, and write it in
the space below.
TV/VCR Combo Brand: ________________________
The brands are listed in alphabetical order with popular
codes listed first.You will use one of these codes to pro-
gram the Millennium 4 to operate your TV/VCR Combo:
1. Turn on your TV/VCR Combo and insert a
video cassette.
2. On the Millennium 4, press VCR once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter the first four-digit code for your TV/VCR
Combo.If you perform this procedure correctly,
the LED will blink twice.
16
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 16

NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Millennium 4 at your TV/VCR Combo
and press POWER once. The unit should turn
off.If it does not respond, repeat steps 2 and 3,
trying each code listed for your brand until you
find one that works.If it still does not work, try
searching for the code (see Searching For Your
Code on page 24).
5. If you’ve found a TV/VCR setup code that works
your TV/VCR Combo and a separate TV code is
also listed, you’ll need to program this code into
the Millennium 4 to access volume control (see
Programming TV Control on page 8).
If there is no separate TV code listed, you will
need to perform the following steps to access
volume control:
a. Press and hold SETUP until the LED blinks
twice, then release SETUP.
b. Enter 9 - 9 - 3. The LED will blink twice.
c. Press VCR once. The LED will blink twice.
6. For future reference, write your TV/VCR
Combo code in the boxes below.
NOTE: Remember, to use the Millennium 4 to operate your
TV/VCR Combo, press VCR first.
Setup Codes for TV/VCR Combos:
American High 0035 (for TV use 0051)
Brocksonic 0002, 0294,
Colt 0072
Curtis Mathis 0035 (for TV use 0051)
Daewoo 0278
Emerson 0002, 0294, 0479
Funai 0000
GE 0035 (for TV use 0051), 0060 (for TV use 0047),
0048 (for TV use 0093), 0240
Hitachi 0035 (for TV use 0051), 0000
HQ 0000
Lloyds 0000
MGA 0240
Magnavox 0081 (for TV use 0054), 0035 (for TV use 0051), 0000
continued on next page...
17
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 17

PROGRAMMING TV/VCR COMBO CONTROL
Setup Codes for TV/VCR Combos (continued):
Magnin 0240
Memorex 0037, 0162 (for TV use 0250)
Mitsubishi 0048 (for TV use 0093)
Orion 0002, 0294, 0479
Panasonic 0035 (for TV use 0051), 0162 (for TV use 0250)
Penney 0035 (for TV use 0051), 0240, 0162 (for TV use 0250)
Quasar 0035 (for TV use 0051), 0162 (for TV use 0250)
RCA 0060 (for TV use 0047), 0035 (for TV use 0051),
0048 (for TV use 0093)
Sansui 0000, 0479
Sanyo 0240
Sears 0000, 0037
Sharp 0048 (for TV use 0093)
Sony 0032 (for TV use 0000)
Symphonic 0000
Zenith 0000
PROGRAMMING CABLE CONVERTER
(OR DBS RECEIVER) CONTROL
The Millennium 4 is preprogrammed at the factory to
operate the cable converter given to you by your cable
company. However, if you have another brand or model
of cable converter or satellite receiver that you would like
to control, then you’ll need to perform the following
instructions to unlock the cable key, enter in a new code,
and lock the cable key again.
To Unlock the CBL Key:
1. Turn on the Cable Converter or DBS Receiver.
2. On the Millennium 4, press CBL once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter 9- 9 - 7.The LED will blink twice.
4. Press CH- once.The LED will blink twice.
18
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 18

To Program the CBL Key:
1. On the next page,locate the brand name of
your Cable Converter in Setup Codes For Cable
Converters, or DBS (Direct Broadcast Satellite)
Receiver in Setup Codes For DBS Receivers,and
write it in the appropriate space below.
Cable Converter Brand: ________________
or
DBS Receiver Brand: __________________
The brands are listed in alphabetical order
with the most popular codes listed first.You
will use one of these codes to reprogram the
Millennium 4 to operate your Cable Converter
or DBS Receiver.
2. On the Millennium 4, press CBL once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter the first four-digit code for your Cable
Converter or DBS Receiver. If you perform this
procedure correctly, the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Millennium 4 at your Cable Converter
or DBS Receiver and press POWER once. The
unit should turn off. If it does not respond,
repeat steps 2 and 3,trying each code listed for
your brand until you find one that works.If it
still does not work , try searching for the code
(see Searching For Your Code on page 24).
5. For future reference, write your device’s code
and type in the boxes and space below.
Device Type:________________________
NOTE: Remember, to use the Millennium 4 to operate your Cable
Converter or DBS Receiver, press CBL first.
continued on next page...
19
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 19

PROGRAMMING CABLE CONVERTER
(OR DBS RECEIVER) CONTROL
(continued)
To Lock the CBL Key:
1. On the Millennium 4, press CBL once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
2. Enter 9- 9 - 7.The LED will blink twice.
3. Press CH+ once.The LED will blink twice.
Setup Codes for Cable Converters:
ABC 0003, 0008
Americast 0899
Bell South 0899
General Instrument 0476
GoldStar 0144
Hamlin 0273
Jerrold 0003, 0476
Memorex 0000
Panasonic 0000
Paragon 0000
Philips 0305
Pioneer 0144, 0877, 0533
Pioneer 0533
Pulsar 0000
Quasar 0000
Regal 0273
Runco 0000
Samsung 0144
Scientific Atlanta 0008, 0477, 0877
Starcom 0003
Toshiba 0000
Zenith 0525, 0000, 0899
Setup Codes for DBS Receivers:
Echostar 0775, 1005
Expressvu 0775
GE 0566
General Instrument 0869, 0892
HTS 0775
Hughes Network Sys. 0749
JVC 0775
Mitsubishi 0749
20
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 20