urmet domus 1760 Installation and operation manual

DS1760-040A LBT21194
Mod.
1760
OOOOOO
VIDEO DOOR PHONE 2VOICE HANDS-FREE WiFi
MONITEUR 2VOICE MAIN-LIBRES WiFi
VIDEOINTERFONO 2VOICE MANOS LIBRES WiFi
Sch./Ref. 1760/18
(white / blanc / blanco)
Sch./Ref. 1760/19
(black / noire / negro)
USER BOOKLET
NOTICE D’UTILISATION
MANUAL DE USUARIO
Interactive Links

2DS1760-040A
ENGLISH
INDEX
1. GENERAL DESCRIPTION......................................................................................................................... 3
2. DESCRIPTION OF COMPONENTS AND FEATURES .............................................................................. 3
3. BUTTON FUNCTIONS.............................................................................................................................. 4
3.1 BUTTON LED STATUS SIGNALS ................................................................................................... 7
4. FEATURES ............................................................................................................................................... 8
4.1 RECEIVING AND ANSWERING A CALL FROM A CALLING STATION .......................................... 8
4.2 RECEIVING AND ANSWERING AN INTERCOM CALL ................................................................... 9
4.3 RECEIVING AND ANSWERING A SWITCHBOARD CALL ............................................................... 9
4.4 DOOR OPENING FUNCTION......................................................................................................... 10
4.5 SWITCHBOARD CALL OR INTERCOM CALL ............................................................................... 10
4.6 AUTO-ON FUNCTION.................................................................................................................... 12
4.7 ADJUSTMENTS ON THE OSD MENU (ON SCREEN DISPLAY).................................................... 13
4.8 FLOOR CALL.................................................................................................................................. 13
4.9 PANIC ALARM ............................................................................................................................... 14
4.9.1 RESET PANIC ALARM .......................................................................................................... 14
4.10 MUTE FUNCTION........................................................................................................................... 14
4.11 OPERATION WITH HEARING AIDS................................................................................................ 15
4.12 AUDIO ACTIVATION BY PRESSING BUTTON (“PUSH-TO-TALK” MODE) ............................ 15
5. HOMEPAGE ........................................................................................................................................... 16
5.1 MUTE FUNCTION CONFIGURATION............................................................................................ 16
5.2 AUTOMATIC DOOR OPENER (MASTER VIDEO DOOR PHONE ONLY) ...................................... 16
5.3 ACTIVATION OF THE VIDEO DOOR PHONE VOICE MAIL
(MASTER VIDEO DOOR PHONE ONLY) ....................................................................................... 17
5.4 CONSULTING VIDEO CLIPS (MASTER VIDEO DOOR PHONE ONLY) ........................................ 17
5.5 SPECIAL FUNCTIONS .................................................................................................................. 19
5.6 LANGUAGE SELECTION .............................................................................................................. 20
5.7 CLEAN SCREEN ........................................................................................................................... 20
6. VIDEO DOOR PHONE PARAMETER AND ADVANCED FUNCTIONS CONFIGURATION ..................... 21
FRANÇAIS.............................................................................................................................................. 22
ESPAÑOL................................................................................................................................................ 42
The document contains INTERACTIVE LINKS for faster and more ecient consultation.
Interactive Links
The features described in the following booklet refer to the rmware release: 1.1.0-32 of video door phone
1760/18 and /19.

3
DS1760-040A
1. GENERAL DESCRIPTION
The video door phones Ref. 1760/18 and Ref. 1760/19 are dedicated to use in 2Voice video door
phone systems.
The main features are:
• colour 5’’ TFT-LCD screen (Wide Angle);
• backlit soft-touch buttons (*);
• possibility of activating video door phone functions via gesture commands on the IR detector or via
voice commands (disabled by default);
• possibility of adjusting the audio/video (speaker volume, brightness, contrast and colour) via OSD menu;
• possibility of customising the ring tone with a choice of ve dierent types;
• possibility of adjusting the ring tone volume;
• call forwarding function to smartphones and tablets;
• video door phone voicemail function (up to 32 video messages);
• users book for intercom calls (up to 32 users, addition of 32 more users to the directory with the 2Voice
Installer Tools app);
• “Screen cleaning” function;
• “MUTE” function;
• hands-free or push-to-talk mode:
– Hands-free: press the audio button once to start the conversation and once again to end it;
– Push-to-talk: press the audio button to speak to the door unit, release the button to listen.
(*) When a key is pressed an acoustic signal (beep) is provided. This signal is disabled when “MUTE”
function is activated.
2. DESCRIPTION OF COMPONENTS AND FEATURES
1
2
3
4
5
6
7
8
10
3
11
9
1. Function keys:
: driveway gate door opener key
: closing the contact between terminals X1 and X2
: closing the contact between terminals Y1 and Y2
: no function
: auto-on / video switching key
: special function key

4DS1760-040A
: intercom call key
: left scrolling arrow key
: right scrolling arrow key
: upwards scrolling arrow key
: downwards scrolling arrow key
: switchboard call key
2. Key for activation of secondary functions / display turning on (with green backlighting LED)
3. Raised notches for vision-impaired
4. Pedestrian door opener button (with green / red backlighting LED)
5. Function button (with red backlighting LED)
6. 5” display
7. Microphone
8. IR sensor for gesture commands
9. Micro SD slot
10. Audio on/o button (with green backlighting LED)
11. Speaker
The video door phone is provided with a built-in hearing aid device, which only works during
video calls. Furthermore, the video door phone is equipped with two raised notches, positioned on the
sides next to the buttons and to help vision-impaired users locate the position of the two
buttons by touch.
3. BUTTON FUNCTIONS
1 2 3 4 5 6
State
Button
STAND-BY
(video door phone
in stand-by mode)
WAITING FOR
AN ANSWER
(receiving call)
IN VOICE MODE
(communicating with
another device)
SENDING CALLS
(stand-by and key
pressed once)
SECONDARY
FUNCTIONS
(stand-by and
key pressed
once)
HOMEPAGE
(stand-by and
key pressed
twice)
Open pedestrian
door (*)
Open pedestrian
door (*)
Open pedestrian
door (*)
Open pedestrian
door (*)
Open pedestrian
door (*) ---
“MUTE” Function --- --- --- --- ---
(Go to “SENDING
CALLS” status,
refer to column 4) Activate audio
If pressed:
A) in “hands-free”
operating mode,
ends conversation
B) in “Push to talk”
operating mode:
- hold pressed to
enable audio with
door unit
- press briey to start
or end conversation.
---
(Go to “SENDING
CALLS” status,
refer to column 4) Conrm selection

5
DS1760-040A
1 2 3 4 5 6
State
Button
STAND-BY
(video door
phone in
stand-by mode)
WAITING FOR
AN ANSWER
(receiving call)
IN VOICE MODE
(communicating with
another device)
SENDING CALLS
(stand-by and key
pressed once)
SECONDARY
FUNCTIONS
(stand-by and
key pressed
once)
HOMEPAGE
(stand-by and key
pressed twice)
(Go to
“SECONDARY
FUNCTIONS”
status, refer to
column 5)
Access or exit the
OSD menu
Access or exit the
OSD menu
Access the
address book
(Go to
“HOMEPAGE”
status, refer to
column 6)
Close the
Homepage and turn
off the display
--- Garage door
opener Garage door opener --- Garage door opener ---
---
Closing the
contact between
terminals X1
and X2
Closing the contact
between terminals
X1 and X2 ---
Closing the
contact between
terminals X1
and X2
---
---
Closing the
contact between
terminals Y1
and Y2
Closing the contact
between terminals
Y1 and Y2 ---
Closing the
contact between
terminals Y1
and Y2
---
--- --- --- --- --- ---
---
Video switching
or displaying of
any additional call
station cameras.
--- --- Auto-on ---
---
Special
function (default
code 07)
Special
function (default
code 07) ---
Special
function (default
code 07)
---
--- --- ---
Programmable
intercom call
1 (Default: not
programmed)
--- ---

6DS1760-040A
1 2 3 4 5 6
State
Button
STAND-BY
(video door
phone in
stand-by mode)
WAITING FOR
AN ANSWER
(receiving call)
IN VOICE MODE
(communicating with
another device)
SENDING CALLS
(stand-by and key
pressed once)
SECONDARY
FUNCTIONS
(stand-by and
key pressed
once)
HOMEPAGE
(stand-by and key
pressed twice)
---
Within the
OSD menu, it
decreases the
parameter value
Within the OSD
menu, it decreases
the parameter value
--- --- Scroll selection to
the left
---
Within the OSD
menu, it increases
the parameter
value
Within the OSD
menu, it increases
the parameter value --- --- Scroll selection to
the right
---
In the OSD menu,
it allows scrolling
parameters
upwards
In the OSD menu,
it allows scrolling
parameters upwards --- --- Scroll selection
upwards
---
In the OSD menu.
it allows scrolling
parameters
downwards
In the OSD menu.
it allows scrolling
parameters
downwards
--- --- Scroll selection
downwards
--- --- --- Exchange call --- ---
(*) The ”AUTOMATIC DOOR OPENER FUNCTION” parameter must be enabled on some calling stations
to activate the automatic door opener function on the video door phone (see product manuals).

7
DS1760-040A
3.1. BUTTON LED STATUS SIGNALS
1 2 3 4 5 6
State
Button
STAND-BY
(video door phone in stand-by
mode)
WAITING
FOR AN
ANSWER
(receiving call)
IN VOICE MODE
(communicating
with another
device)
SENDING
CALLS
(stand-by
and key
pressed once)
SECONDARY
FUNCTIONS
(stand-by and
key pressed
once)
HOMEPAGE
(stand-by
and key
pressed twice)
Off: no function
Flashing green: only when
the automatic door opener
function is active
Slow ashing red
pedestrian gate on main call
station open
Fast ashing red:
pedestrian gate on secondary
call station open
Green on
xed Green on xed Off Off Green on xed
Flashing red:
MUTE 8h or MUTE Timer
Red on xed:
MUTE
Off Off Off Off Off
Off Green on
xed Flashing green Green on xed Off Green on xed
Off: no function
Flashing green:
present a video message
Green on
xed Green on xed Off Off Off
Off White on xed White on xed Off White on xed Off
Off White on xed White on xed Off White on xed Off
Off White on xed White on xed Off White on xed Off
Off White on xed White on xed Off White on xed Off
Off White on xed White on xed Off White on xed Off

8DS1760-040A
1 2 3 4 5 6
State
Button
STAND-BY
(video door phone in stand-by
mode)
WAITING
FOR AN
ANSWER
(receiving call)
IN VOICE MODE
(communicating
with another
device)
SENDING
CALLS
(stand-by
and key
pressed once)
SECONDARY
FUNCTIONS
(stand-by and
key pressed
once)
HOMEPAGE
(stand-by
and key
pressed twice)
Off White on xed White on xed Off White on xed Off
Off Off Off White on xed Off Off
Off Off Off Off Off White on xed
Off Off Off Off Off White on xed
Off Off Off Off Off White on xed
Off Off Off Off Off White on xed
Off Off Off White on xed Off Off
The notications indicated by the following LEDs: , and are only visible when the
video door phone is in the standby mode.
4. FEATURES
ATTENTION! Depending on the usage mode set on the video door phone (Local Power, Low rise block or
High rise block) some of the following services may be restricted.
Some of the following features can also be performed through gestures. For further information, refer to the
“Complete use booklet to gesture commands”or to the “Use booklet to voice commands” by pressing
the relevant link or downloading the booklet from www.urmet.com in the relevant product data sheet.
4.1. RECEIVING AND ANSWERING A CALL FROM A CALLING
STATION
The video door phone will ring and the display will switch on when a call is received. The caller’s image will
appear on the video door phone display. If in the apartment there are one or more Slave video door phones
powered by a local power supply unit and the “Simultaneous switch-on” video parameter is enabled on all
video door phones, when a call is received, all the video door phones will display an image of the caller (for
all details, refer to the “Parameter conguration handbook” in chapter “Video” by clicking the relevant
link). If there are Slave video door phones powered by system Bus, only the Master video door phone will
display the caller’s image. To display the caller’s image on a Slave video door phone, press the relevant
button.
Press the key to establish a conversation with the caller (the LED of the key will start ashing).
Press the key again to terminate the call and the display switches o.

9
DS1760-040A
4.2. RECEIVING AND ANSWERING AN INTERCOM CALL
When the video door phone receives an intercom call, it rings and if it is congured in Local Power mode,
the following screens also appear on the display:
Press the key to answer the call and the key LED starts ashing.
The display shows the following screen:
Press the key again to terminate the call.
4.3. RECEIVING AND ANSWERING A SWITCHBOARD CALL
When the video door phone receives a call from the switchboard, it rings and the following screen appears
on the display:

10 DS1760-040A
Press the key to answer the call from the switchboard and the key LED starts ashing.
The display shows the following screen:
Press the key again to terminate the call.
4.4. DOOR OPENING FUNCTION
The video door phone allows the opening of any pedestrian door or garage door associated with the calling
station. With the video door phone at rest (*) receiving a call (*) (received from the calling station), in voice
mode (*) or during an auto-on event (*) (with the calling station), it is possible to open:
• the pedestrian door by pressing
• the garage door by pressing
(*) According to how the door opener is programmed: free or secret.
4.5. SWITCHBOARD CALL OR INTERCOM CALL
SWITCHBOARD CALL
This function allows to establish a conversation with the gatekeeper lodge switchboard.
Proceed as follows to make a call: with the video door phone in “STAND-BY” mode press the key , the
keys and will turn on with steady light, press the key to start the call.
If there is no answer to the call within 10 seconds, the video door phone will generate a dissuasion tone (2
beeps) and the call will be saved in the switchboard.
If the switchboard operator answers the call the conversation is established, the LED of key on the
video door phone starts ashing and the video door phone displays the following screen:

11
DS1760-040A
By pressing the following , and keys it is possible to activate the respective function (for further
details see chapter Button function).
Press the key to terminate the call and the display switches o.
INTERCOM CALL
This function allows to make an intercom call to another indoor station.
It is possible to start an intercom call in 2 ways:
1. FROM INTERCOM KEY
In this mode it is possible to make an intercom call to one contact only (indoor station) assigned to the
intercom key (for all details about the assignment method, see the Parameter conguration booklet
chapter “Call button assignment”).
With video door phone in “STAND-BY” mode press key , keys and will turn steady on, press
key to start the intercom call.
When conversation with the indoor station has been established, the LED of key starts ashing.
By pressing the following , and keys it is possible to activate the respective function (for further
details see chapter Button function).
Press the key again to terminate the call.
2. FROM VIDEO DOOR PHONE BOOK
In this mode it is possible to make an intercom call to all contacts (indoor stations) available in the video
door phone book (for all details on how to add a contact to the video door phone book, see the Parameter
conguration booklet chapter “Contacts”).
With video door phone in “STAND-BY” mode press key , keys and turn steady on, press key
to open the video door phone book.
The display shows the following screen:
Only for video door congured powered in Low rise block and High rise block modes, access to
the video door phone book is permitted to one device at a time, for a maximum of 5 minutes. If a user
tries to access the book when it is already used on another device, the video door phone will emit a
dissuasion tone (4 beeps) indicating that the address book cannot be displayed at the moment.
Press keys or to select the contact in the book to be called, then press the key to start the
call.

12 DS1760-040A
The display shows the following screen:
When conversation with the indoor station has been established, the LED of key starts ashing and if
the video door phone is in Local power mode the display shows the following screen:
By pressing the following , and keys it is possible to activate the respective function (for further
details see chapter Button function).
Press the key again to terminate the call.
4.6. AUTO-ON FUNCTION
The auto-on function makes it possible to display on the video door phone the image taken from the call
stations in the system. When the video door phone is in STANDBY mode, press the key to access
the FUNCTIONS status, then press the key to display the image taken from the call station (the rst
displayed image is the one from the main call station with ID 0); press the key again to switch to the
next call stations or to any control cameras. Press the key to enter into audio-video communication with
the displayed call station; pressing the key a second time disables the auto-on function. The auto-on
function cannot be carried out if the column is already engaged in a conversation; in this case, if you try to
activate the function, the video door phone will emit a dissuasion tone (4 beeps).

13
DS1760-040A
4.7. ADJUSTMENTS ON THE OSD MENU (ON SCREEN DISPLAY)
To access the OSD menu, press key during a video call or in auto-on mode. The following screen page
will be displayed:
Press the or keys to select the parameter to be adjusted:
- Speaker volume (conversation only)
- Brightness
- Contrast
- Colour
After selecting the parameter, press the and keys to increase or decrease the adjustment value of
the selected parameter.
4.8. FLOOR CALL
If a oor call is received, the video door phone starts ringing with the ringtone chosen by the user.
The function is only available if a key has been connected to the “CP” terminals
If the video door phone is congured in Local Power mode, the display will show the following screen when
the call is received:

14 DS1760-040A
4.9. PANIC ALARM
The panic alarm signal is sent from the video door phone to the switchboard in the system and to all
smartphones in which the call forwarding function has been activated via the CallMe app.
The activation of the “Panic Alarm” signal is only available if a key has been connected to the “PANIC”
terminals.
Press the key to activate the function.
ATTENTION! The panic alarm function assumes that:
• the video door phone is congured in Local Power or Low rise block;
• the system has a switchboard;
• there is an operator on duty at the switchboard;
• the switchboard operator has been duly instructed on what to do if a panic alarm is received.
When the user presses the key, a panic alarm message is sent to the concierge switchboard.
SEND TO CALLME APP
If the video door phone is congured in Local Power or Low rise block mode and if the call forwarding
function has been congured in the system, the “Panic Alarm” message is also sent to all Smartphones on
which the CallMe app is installed (for full details on how to congure the call forwarding function, see the
Parameter conguration booklet in the “Call Forwarding Function” chapter).
In addition, if the video door phone is congured in Local power mode, through the CallMe app it is
possible to make an emergency call from the smartphone to the apartment that sent the panic signalling
alarm.
4.9.1 RESET PANIC ALARM
After sending the panic signalling alarm, it is possible to reset the sending of the signalling from the video
door phone.
Access the Homepage of the video door phone by pressing the key twice when the video door phone
is in stand-by mode.
The display shows the following screen:
The following icon is displayed at the bottom left and allows resetting the panic alarm.
Press the key to reset the alarm.
4.10. MUTE FUNCTION
This function can be used to mute the ring tone on the video door phone and any connected supplementary
ringers.
The MUTE function does not exclude the ringing of the oor call.
The function can be activated in two dierent ways:

15
DS1760-040A
• MUTE 8h or MUTE Timer: pressing the key for a longer time will silence the video door phone in
the congured mode: 8h or Timer or via a schedule (for more details on how to congure the function
see chapter “Mute function conguration”).
In the event of a power failure, the MUTE 8h function will restart from zero as if it had just been
activated.
• MUTE (no time limit): by pressing the button for a short time the video door phone will be muted
until the button is pressed again.
After any power failure the function will keep the state it had before the event.
4.11. OPERATION WITH HEARING AIDS
The video door phone is equipped with a device to allows people with hearing impairments, equipped with
a special headset, to hear who is speaking from the call station or other video door phones in case of calls
from the switchboard.
The device is able to interface hearing aids with “T” function at a distance of around 20 cm.
Position
the selector
in Tmode
max 20 cm
4.12. AUDIO ACTIVATION BY PRESSING BUTTON
(“PUSH-TO-TALK” MODE)
If the communication between the entry panel and the video door phone is disturbed or missing, make sure
you have removed the transparent lm covering the video door phone display. If the lm has been removed
and the audio is still disturbed, it is possible to activate the two telephony channels (inbound and outbound)
individually. After having received a call, briey press to activate the control panel audio; afterwards, hold
the button pressed to activate the audio channel towards the outside and speak to the caller.
Release the button to listen.
The “Push to Talk” mode can be activated from the video door phone conguration menu (see Parameter
conguration booklet in chapter “Audio”).

16 DS1760-040A
5. HOMEPAGE
The display of the video door phone is normally o and switches on automatically when a call is received.
The display can be switched on voluntarily by the user to access the video door phone homepage. Press
the key twice when the video door phone is in stand-by mode.
For video door phones in High rise block or Low rise block mode, access to the Homepage is
permitted to one device at a time, for a maximum of 5 minutes. If a user tries to access the Homepage
when it is already in use on another device, the video door phone will emit a dissuasion tone (4 beeps)
indicating that the page cannot be displayed at the moment.
The display shows the following screen:
On the Homepage, press , , and keys to select a function or parameter of the video door
phone that you wish to set. When selection has been made press the key to conrm the selection.
The congurations on the device are explained in detail below.
5.1 MUTE FUNCTION CONFIGURATION
The following parameter is used to congure the type of MUTE when the key is pressed for a long time
(for further details see the chapter “Mute function”).
On the homepage, select the icon and press the key to change the conguration from MUTE
8H (default) to MUTE Timer.
The following icon is displayed to conrm that the parameter has been changed.
To congure the parameters of the MUTE Timer function, see the Parameter conguration booklet in
chapter “Mute ring timing”.
If you wish to reset the MUTE 8H function, simply repeat the procedure.
5.2 AUTOMATIC DOOR OPENER (MASTER VIDEO DOOR PHONE
ONLY)
The automatic door opener function allows the door to open automatically when a call is received, without
the need to answer.
On the Homepage, select the following icon and press the key to enable the automatic door
opener function.

17
DS1760-040A
The following icon is displayed to conrm that the parameter has been changed.
The LED on the key starts ashing green when the video door phone is in standby mode.
If the video door phone is congured in Local Power or Low rise block mode, it is possible to enable
the automatic door opener function with scheduling. Scheduling allows parameters to be congured,
e.g. a specic time and days, which control the function activation (for further details see the Parameter
conguration booklet in chapter “Automatic Door Open Timing”).
Press again to enable the automatic door opener function with scheduling.
The following icon is displayed to conrm that the function has been changed.
The LED on the key starts ashing fast in green when the video door phone is in standby mode.
5.3 ACTIVATION OF THE VIDEO DOOR PHONE VOICEMAIL
(MASTER VIDEO DOOR PHONE ONLY)
This function enables the automatic recording of a video clip following a call. The duration of the video clip
is 10 seconds.
On the homepage, select the icon and press the key to enable the video door phone voicemail
function.
The following icon is displayed to conrm that the parameter has been changed.
To disable the video door phone voicemail, repeat the procedure described above.
ATTENTION! If the call forwarding function has been enabled on the video door phone, conrming
selection on the icon will disable the video door phone voicemail function and enable the call
forwarding function (for further details see the Parameter conguration booklet in chapter “Call
Forwarding Function”).
5.4 CONSULTING VIDEO CLIPS (MASTER VIDEO DOOR PHONE
ONLY)
ATTENTION! If the call forwarding function has been enabled on the video door phone, it will not be
possible to consult the video clips on the video door phone voicemail.
All recorded video clips are available on the video door phone voicemail. If there is at least one video clip
that has not been viewed, a red dot will appear on the icon on the homepage as a notication symbol.
If there are new video clips, the LED on the key ashes green when the video door phone is in
standby mode.
On the Homepage, select the icon and press the key to access the video door phone
voicemail.

18 DS1760-040A
The display shows the following screen:
Press the and keys to select the video clip, then press the key to start viewing.
Each saved video clip shows the date and time it was taken. The red dot to the right indicates that the
video clip has not yet been viewed.
By pressing the key, the following icon can be selected to delete the single selected video clip.
Press the key to conrm your selection; the following screen appears on the display:
Press the key to conrm the deletion of the video clip. Press the key to cancel and return to the
video door phone book.
By pressing the key again after selecting the single video clip delete icon , è possibile selezionare
the following icon can be selected to delete all video clips in the video voicemail.

19
DS1760-040A
Press the key to conrm your selection; the following screen appears on the display:
Press the key to conrm the deletion of the video clip. Press the key to cancel and return to the
video door phone book.
5.5 SPECIAL FUNCTIONS
The video door phone is enabled to manage electric actuators via special decoders Ref. 1083/80. On the
Homepage select the following icon, then press the key to display the screen with the list of
programmed special functions (for further information on how to add a special function activation see the
Parameter conguration booklet in the “Activations” chapter).
Press the and keys to select the function, then press the key to activate the selected function.
The key allows you to return to the video door phone homepage.

20 DS1760-040A
5.6 LANGUAGE SELECTION
To change the language of the video door phone, access the Homepage and select the following
icon, then press the key to display the following screen:
Press the , , and keys to select the language you wish to set, then press the key to
conrm your selection.
5.7 CLEAN SCREEN
The “Clean Screen” function temporarily makes the video door phone keys insensitive to any action.
This feature proves useful to avoid unintentionally activating the functions of the video door phone when
cleaning the screen.
On the Homepage, select the following icon and then press the key to activate the function.
The display shows the following screen:
The keys are inhibited for 30 seconds, after which the video door phone resumes its normal operation.
Once the “Clean Screen” function is activated, you cannot turn it o in advance.
When a call comes in, the function is deactivated so that the keys can be used to answer the call.