urmet domus 1730 Quick guide

DS1730-010
Mod.
1730
2-WIRE SINGLE-FAMILY HANDS-FREE COLOUR KIT
Ref. 1730/501
Installation and instruction manual

2 DS1730-010
TABLE OF CONTENTS
1 WARNINGS ......................................................................................................... 3
2 DESCRIPTION .................................................................................................... 4
3 DEVICE PERFORMANCE AND OVERVIEW ..................................................... 5
4 VIDEO DOOR PHONE ........................................................................................ 6
4.1 Video door phone installation .................................................................................. 7
4.2 Connections ............................................................................................................ 8
5 OUTDOOR STATION .......................................................................................... 9
6 OUTDOOR STATION INSTALLATION ............................................................. 10
6.1 Wall-mounted installation. ..................................................................................... 10
6.2 Flush-mounted installation .................................................................................... 10
6.3 Name tag inscription ............................................................................................. 11
7 CONNECTIONS ................................................................................................ 12
8 INSTALLING THE EXTERNAL CAMERA ......................................................... 14
9 1730 SYSTEM CONNECTION EXAMPLES ..................................................... 16
9.1 Basic kit diagram ................................................................................................... 16
9.2 Connection of 3 apartment stations in parallel ...................................................... 16
9.3 Summary of basic 1730/501 kit features ............................................................... 17
9.4 Summary of default settings.................................................................................. 17
9.5 LED 1 and 2 indications on basic systems with kit only ........................................ 18
9.6 Maximum distances between devices ................................................................... 18
9.7 Default system DEL time....................................................................................... 18
10 ADDITION OF ACCESSORIES FOR SYSTEM EXPANSION .......................... 18
10.1 Extension example: single-family system with 2 outdoor stations ....................... 19
10.2 Extension example. two-family system with 2 users ........................................... 20
11 SYSTEM OPERATION ...................................................................................... 21
11.1 External call ........................................................................................................ 21
11.2 Activation of contacts on the outdoor station....................................................... 22
11.3 Video surveillance systems ................................................................................. 23
11.4 Audio line activation ............................................................................................ 24
11.5 Floor call ............................................................................................................. 24
11.6 Intercom service between apartment stations ..................................................... 25

DS1730-010 3
1 WARNINGS
Read the notes in this manual carefully. This manual contains important information on safe installation, use
and maintenance.
GENERAL WARNINGS
 This device is only intended for the specifically designed use.
 All other use is improper. The manufacturer cannot be held responsible for damage deriving from
improper, incorrect or unreasonable use.
 The system must be built in compliance with the regulations in force. All devices in the system must be
exclusively used for the purpose for which they were designed.
 Provide a suitable cut-off and protection master switch upstream from the devices, with contacts open
by at least 3 mm.
 Make sure that the plate data corresponds to the power specifications before connecting the device to
the mains.
 Check that the devices are intact after removing them from the packaging. Keep the packaging (plastic
bags, polystyrene etc.) away from children. Packaging is potentially dangerous.
 Keep the ventilation or cooling openings and slots free.
 Do not install the devices in environments exposed to rain or humidity. Use specific boxes if required.
 Disconnect the devices from the mains using the system switch before cleaning or maintenance.
 Disconnect power from the circuit breaker in the event of failure and/or malfunctioning of the device. Do
not tamper with the device.
 Exclusively contact a service centre authorised by the manufacturer for repairs in case of infiltration of
liquids or objects inside the appliance.
 Do not use power extension wires.
 Exclusively use the spare parts supplied by the manufacturer for repairs.
 Installers must make sure that user's information is applied to the connected devices. Keep this manual
with the device at all times.
 Failure to respect of these precautions can affect safety of the device.
INSTALLATION PRECAUTIONS
 This kit must be powered using the specific power unit included in the kit.
 Position the components on vertical, smooth supports respecting the instructions contained in this
manual.
CLEANING THE PARTS
Use a soft cloth to remove dust and dirt. Do not use aggressive detergent liquids (petrol, solvents etc.) which
could cause corrosion. Do not use spray products to clean the device.
The information contained in this manual is subject to change without prior notice. For updates to
the manual and further information on the system, go the following link:

4 DS1730-010
2 DESCRIPTION
The 1730 system can be used to create video door phone systems for from one-family to four-family
houses with only two non-polarised wires and a power supply unit. Starting from the basic kit, consisting
of a outdoor station, a video door phone and a power supply unit, the system can be expanded up to its
maximum capacity without adding further power units.
The intercom service between stations in the same apartment is active on the system. Audio door phones
and video door phones can be added.
The basic kit 1730/501 contains:
Outdoor station with colour camera 1730/51
7” soft touch hands-free video door phone 1730/1
Specific power unit. 1730/100
Maximum expandability of the system
Outdoor stations Up to 2
Calling buttons for each outdoor station Up to 4
Total audio and video door phone apartment stations Up to 8
Surveillance cameras for each outdoor station 1
Power units for the whole system 1
Optional video distributor 1
By using the integrable accessories, the 1730 system can manage the following services:
 Video surveillance from all apartments
 Intercom calls between the devices present in an apartment
 Access control using a magnetic key reader incorporated in the outdoor station
 Activation of a door lock and driveway from all apartment stations.
 Call forwarding from the outdoor station to a smartphone
Urmet integrable accessories:
Recommended outdoor camera 1096/405
Hands-free door phone. 1730/2
Two or four button kit for outdoor station with name tags 1730/102-104
Access control module 1730/65
Five-key kit for users 1730/105
Video distributor for simplified wiring and creating three- and four-
family systems
1730/54
WiFi module for call forwarding to smartphones 1730/67
Accessory for flush-mounted outdoor station installation 1730/60

DS1730-010 5
3 DEVICE PERFORMANCE AND OVERVIEW
OUTDOOR STATION
Wall-mounted with rain cover and colour camera as standard. Possibility of
expanding two and four calling buttons using additional accessories Ref.1730/102
and 1730/104.
Connection of a local door opening contact (hall button). Activation of a 12V lock
and a volt-free contact for the driveway.
VIDEO SURVEILLANCE
Outdoor station set-up for connection of an Urmet camera type Ref. 1096/405 or
other brand with CVBS analogue video signal.
Possibility of monitoring the external perimeter using all the cameras present
either with or without active audio. The external camera is powered by the outdoor
station to which it is connected.
APARTMENT STATIONS
7” colour video door phone Ref. 1730/1 and audio door phone Ref. 1730/2, both
soft touch and hands-free. LED for identifying the call source.
Possibility of connecting up to 4 door units in parallel in the same apartment.
Intercom service between devices in the same apartment.
Set-up for connecting a floor call button.
ACCESS CONTROL
Set-up for inserting an access control module (Ref. 1730/65) for activating the lock
inside the outdoor station.
Programmable opening keys with master keys supplied with the access control
module.
CALL FORWARDING
With the WiFi interface Ref. 1730/67 inserted inside the video door phone, the
service can be used to forward calls from the outdoor station to a smartphone and
manage them using the URMET VIEW App.
POWER
A single power supply unit for the entire system to support both the basic
functions of the video door phone system and the available additional services.
DISTRIBUTOR
Optional distributor to facilitate connection over long distances in extended
installations (for details, see the relative table referring to a basic installation in
this manual) and up to four families. It can be used either alongside a star or in-
out wiring or replace it.

6 DS1730-010
4 VIDEO DOOR PHONE
ICONS AND FUNCTIONS
1
Ring tone mute LED
5
Open lock
2
LEDs for outdoor station
1 or 2
6
Activate additional contact
3
Microphone
7
Audio button
4
Turn camera on
8
Settings
SETTINGS
9
Brightness
11
Conversation volume
10
Colour
12
Call volume
REAR VIEW
13
Speaker
15
Slot for WiFi module
14
Bracket hooks
16
Terminal board
/
Dip
-
switch
TO MUTE THE RING TONE: Turn slider 12 all the way to the left.
FEATURES
Video resolution 800 x 480 pixels Button backlighting after
activation
Automatic
Display 7” TFT Power voltage 26 Vdc
Stand-by consumption ≤ 70 mA Maximum consumption ≤ 300 mA
Working temperature range 0° / +55° C Dimensions and weight 195x155x16mm /
370 g
1
3
2
4 5 6 7
8
9 10 11 12
13 14 15 14 16

DS1730-010 7
4.1 VIDEO DOOR PHONE INSTALLATION
The video door phone includes a dedicated bracket for installation directly on the wall or in a flush-mounting
box type 503 (recommended choice) or in a round 60 mm diameter box.
Fix the bracket at a height of about 1.5 m from the ground with the appropriate anchor bolts. Use the available
locations by placing the UP sign at the top:
Note: When using a 503 box, fix the bracket through the last two holes at the bottom.
After fixing the bracket to the wall or to the flush-mounting box, place the video door phone on the areas of
the bracket indicated by the arrows, then push the device downwards so that it hooks onto the bracket.
INSTALLATION IN 503
BOX
INSTALLATION
ON WALL
INSTALLATION IN 60 mm
DIAMETER BOX
Attachment areas for fixing
the video door phone
Holes for
60 mm diameter flush-
mounting
Holes for
flush-mounting box 503
DESCRIPTION OF THE BRACKET

8 DS1730-010
4.2 CONNECTIONS
The video door phone connections and the configuration dip switches are located on the back of the video
door phone (the basic kit 1730/501 does not require any changes to the default configuration for installation).
DESCRIPTION OF TERMINAL BOARD AND CONNECTOR J10
IN
IN Line input OUT OUT Line output J10 Floor call connection
MEANING OF DIP SWITCHES
1
2 User number 3 End of line 4 Master / Slave
DEFAULT DIP SWITCH POSITION
1 and 2  User number = 1
3  End of line = ON
4  Master
 If you want to expand the system to other apartment stations, see the instructions supplied with
the relative device to be added (video door phone 1730/1 or door phone 1730/2).
 The default dip switch position has been provided for typical uses of a basic kit.
POWER OFF AND
BACK ON AFTER
EACH CHANGE TO
THE DIP SWITCHES

DS1730-010 9
5 OUTDOOR STATION
Front view Side view Rear view
FUNCTIONS
1 Camera 4 Name tag 7 Rain hood
2 Courtesy LED 5 Call button 8 Wall fastening screw seat
3 Speaker 6 Microphone 9 Terminal board / Dip-switch
* A mean current of 300mA, up to 500 mA peak and a voltage of 12 Vdc, are available on the outdoor station
for powering a CCTV camera.
FEATURES
Video resolution 700 TVL Camera lens 1/4”, 110°
Power voltage 26 Vdc Maximum consumption ≤ 270 mA
Minimum light 0.05 LUX Conversation time 120 seconds
IP degree 54 Working temperature range -10° / +55° C
Dimensions 103x185x44mm Weight 790 g
FUNCTIONS AVAILABLE ON THE OUTDOOR STATION
Opening of the electric lock on terminals SE+/SE- 12Vdc /Vac
Normally-open volt-free contact on NO/NO terminals 1A @30Vdc
SUPPLEMENTARY SERVICE SET-UP
Connection to external camera Urmet Ref. 1096/405 or other CVBS camera *
Access control module connection Ref. 1730/65

10 DS1730-010
6 OUTDOOR STATION INSTALLATION
6.1 WALL-MOUNTED INSTALLATION.
Undo the front block from the rain hood (see section 6.3 - Figures 1A, 1B and 1C) and fix it to the wall at the
recommended height.
6.2 FLUSH-MOUNTED INSTALLATION
The accessory Ref. 1730/60, not included in the kit, is available for flush-mounted installation. It consists of
a box to be recessed into the wall, on which there are several holes for running the wires a plate on which to
screw the front block.
Fixing
screws
Fixing
screws
Rain hood
Front block
Hole for
running
wires
Recommended
height
FRONT
BLOCK
Holes for
running wires Fastening
screws
BOX
PLATE
Recommended
height

DS1730-010 11
6.3 NAME TAG INSCRIPTION

12 DS1730-010
7 CONNECTIONS
Connection and configurations are available on the rear side of the front block. To access the connections
and dip switches, undo the screw holding the front block to the hood, as described above.
DESCRIPTION OF TERMINALS AND JUMPER JP4
IN
IN Input NO NO
Volt-free
contact
SE+
SE-
Electric
lock
AP
AP
Pedestrian
gate
JP4
Camera
activation
MEANING AND VALUE OF DIP SWITCHES
1
Outdoor
station
identifier
2
Lock control
time 3
Key
programming 4
Video
standard
5
6
Total
buttons 7
Line
closure
1, 2 300ms / 4 sec. OFF / ON PAL / NTSC 1, 2, 4 OFF / ON
DEFAULT DIP SWITCH POSITION
1  Outdoor station identifier = 1
2  Lock control time = 300 ms
3  Key programming = OFF
(see manual of the 1730/65 module)
4  Video standard = PAL
5 and 6  Total buttons = 1
7  End of line = ON
REAR SIDE
OF THE FRONT
BLOCK
Terminal board
Dip switch
Camera connection
External
audio volume
adjustment
Jumper JP4
POWER OFF AND
BACK ON AFTER
EACH CHANGE TO
THE DIP SWITCHES
AND JUMPERS

DS1730-010 13
DEFAULT JUMPER JP4 POSITION: ON
Jumper JP4 must be removed when adding an external camera. Otherwise keep it in the default position.
 See the instructions supplied with the individual devices to expand the system with another outdoor
station (Ref. 1730/51) or with additional call buttons (2-4 button kit Ref. 1730/102-104) or for
integrating the access control module (Ref. 1730/65).
 The default dip switch and jumper position has been provided for typical uses of a basic kit.

14 DS1730-010
8 INSTALLING THE EXTERNAL CAMERA
A camera can be integrated in the 1730 system to monitor the external environment. The camera can be
picked from the Urmet CCTV catalogue with CVBS operating mode (12Vdc power, max. average
consumption 300 mA), for example a AHD DAY & NIGHT CAMERA 4MPX 2.8mm WITH IR LED, Ref.
1096/405.
The outdoor station is supplied with a 3-wire cable to be inserted in the P2 connector on the back (see the
Connections chapter):
Outdoor station set-up
1. Disconnect the power.
2. Remove the jumper JP4.
3. Insert the connector in the P2 area and connect the 3 wires according to the diagram below.
4. Restore power.
Connection diagram
Note: Make sure that the black cable is connected to the two negatives coming from the camera (video signal
and power supply).
Blue wire
Black wire
Red wire
THREE-WIRE CABLE

DS1730-010 15
* Recommended accessories
To connect the wires coming from the outdoor station to those of the camera, we recommend the use of
adapters of the type exemplified below. Use a 75 Ω coaxial cable for the video signal from the camera.
Set-up for Urmet camera Ref. 1096/405 in CVBS
For operation with the 1730 system, CVBS video mode must be selected on the camera. To do this:
1. Press the button on the video door phone several times (see the "Video surveillance"
paragraph) until a blue screen (camera selected) appears on the video door phone.
2. Select the Analog CVBS video output through 2 dip switches placed at the end of the
connection cable.
TVI video output
AHD video output
Analog CVBS video output
CVI video output
The image must appear on the video door phone.
Note: If the operation described above is not successful, power the camera off and switch it back on again
before repeating the operations.
Refer to the specific product manual for installation and configuration of a generic camera compatible with
the specified features.
Adapter for coaxial cable with
male BNC connector
Power adapter with male
connector
ON
1 2
ON
1 2
ON
1 2
ON
1 2

16 DS1730-010
9 1730 SYSTEM CONNECTION EXAMPLES
9.1 BASIC KIT DIAGRAM
The 1730/501 kit is ready for installation using the following diagram. There is no need to modify the dip
switches and jumpers on the devices.
9.2 CONNECTION OF 3 APARTMENT STATIONS IN PARALLEL
The following devices are needed for this installation: video door phones 1730/1 or door phones 1730/2. The
position of the dip switches of the video door phone already installed must be changed as shown below:
VIDEO DOOR PHONE
ADDITIONAL
INTERNAL
DEVICES

DS1730-010 17
9.3 SUMMARY OF BASIC 1730/501 KIT FEATURES
See the next chapter for a detailed description of the individual functions.
CALL FROM THE OUTDOOR
STATION AND LIGHTING OF
THE VIDEO DOOR PHONE
DISPLAY
Press the call button on the
outdoor station (see basic
diagram for connecting the kit)
OPENING THE PEDESTRIAN
GATE
Press the indicated button with
the video door phone display on
ADDITIONAL SERVICE
ACTIVATION (E.G. DRIVEWAY)
Press the indicated button with
the video door phone display on
VIDEO SURVEILLANCE
FUNCTION
Switch on the display by
pressing the indicated button
FLOOR CALL
Via optional connection on
connector J10 on the video door
phone
OPENING THE PEDESTRIAN
GATE
By connecting the AP terminals
to the outdoor station
9.4 SUMMARY OF DEFAULT SETTINGS
VIDEO DOOR PHONE
DIP SWITCHES
1 and 2  User number = 1
3  End of line = ON
4  Master/Slave = Master
OUTDOOR STATION
DIP SWITCHES
1  Identifier = 1
2  Lock control time = 300 ms
3  Key programming
4  Video standard = PAL
5 and 6  Total buttons = 1
7  End of line = ON
JUMPER JP4 ON External camera not connected

18 DS1730-010
9.5 LED 1 AND 2 INDICATIONS ON BASIC SYSTEMS WITH KIT ONLY
On video door phone
Receiving calls from the
outdoor station
LED 1
slow flashing
When talking to the
out
door
station
LED 1
on fixed
Receiving a floor call
LED 2
slow flashing
Press button
for audio/video activation
LED 1 on fixed
Press button
after audio/video activation
LED 1 and 2 off
Note: See the instructions supplied with the individual product for additional video/audio door
phones.
9.6 MAXIMUM DISTANCES BETWEEN DEVICES
With minimum cable cross
-
section area NOT less than 0.75 mm
2
Between
outdoor station
and last video door phone
160 m
Between
outdoor station
and power unit
60 m
Between power unit and last video door phone
100 m
Between
outdoor station
and additional external camera
30 m
In systems designed to the limit of the permitted extension (in terms of distances and number of devices
present), it is recommended to use cables with a cross-section area greater than 0.75 mm2 to avoid, for
example, interference on the display when running commands from the video door phone.
9.7 DEFAULT SYSTEM DEL TIME
Call and talk time:
Call answering waiting time from
outdoor station
30 sec.
Conversation time with
outdoor station
120 sec.
10 ADDITION OF ACCESSORIES FOR SYSTEM EXPANSION
Simplified dip-switch programming is available to configure an extended system with additional
accessories. Installation can be made easier with the optional use of a distributor Ref. 1730/54, which can
replace or supplement inlet-outlet or star wiring on device terminals.
A summary table of the dip switch configuration is available for each additional device.

The single-family system with basic kit does not require any configuration changes. It is already
prepared for operation after the appropriate connection has been made.
The system guarantees protection against short circuits in the shunt.

DS1730-010 19
10.1 EXTENSION EXAMPLE: SINGLE-FAMILY SYSTEM WITH 2 OUTDOOR STATIONS
The following devices are needed for this installation: Outdoor Station Ref. 1730/51, Urmet camera Ref.
1096/405 or generic in CVBS mode (see details in the section dedicated to the outdoor station).
Video door phone Ref. 1730/1 or door phone 1730/2 for the second apartment station.
 Remove jumper JP4 on the outdoor station to which the control camera is connected.

20 DS1730-010
10.2 EXTENSION EXAMPLE. TWO-FAMILY SYSTEM WITH 2 USERS
The following devices are needed for this installation: 2-button kit with name tag for two 1730/102 users.
Camera Urmet Ref. 1096/405 or generic camera in CVBS mode (see details in the section dedicated to the
outdoor station). Video door phone Ref. 1730/1 or door phone 1730/2 for the second apartment station.
 Remove jumper JP4 if the surveillance camera is connected.