urmet domus Audio Two User manual

sec.5
−−−−
1
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
SECTION 5
(REV.D)
Download from
www.urmetdomus.com
Technical manuals area
ONE-FAMILY
AND TWO-FAMILY KITS

I
−−−−
sec.5
SECTION 5 CONTENTS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM - PRODUCT TECHNICAL MANUAL
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM - PRODUCT TECHNICAL MANUAL - Section 5
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Diagrams Section Pag.
ONE-FAMILY AND TWO-FAMILY KITS
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL
DEVICES................................................................................................................................................................................................5................3
ACCESSORIES......................................................................................................................................................................................5................3
SPARE PARTS ......................................................................................................................................................................................5................3
TECHNICALFEAUTURES ....................................................................................................................................................................5................3
PANELINSTALLATION.........................................................................................................................................................................5 ................3
APARTMENT STATION INSTALLATION..............................................................................................................................................5................5
Adjustingthe call volume....................................................................................................................................................................5................5
TRANSFORMER INSTALLATION.........................................................................................................................................................5................5
WIRINGDIAGRAMS..............................................................................................................................................................................5 ................6
2-WIRE ONE FAMILY VIDEO KIT
DEVICES................................................................................................................................................................................................5................7
ACCESSORIES......................................................................................................................................................................................5 ................7
SPARE PARTS ......................................................................................................................................................................................5 ................7
TECHNICALFEAUTURES ....................................................................................................................................................................5 ................7
WIRE CROSS-SECTION AREA ............................................................................................................................................................5 ................7
PANEL....................................................................................................................................................................................................5................8
Installation ..........................................................................................................................................................................................5................8
VIDEO DOOR PHONE...........................................................................................................................................................................5............. 10
Installation ..........................................................................................................................................................................................5 ............. 10
POWER SUPPLY...................................................................................................................................................................................5............. 10
BASIC KIT CONNECTION................................................................................................................................SV102-3216 ................5 ............. 10
SUPPLEMENTARY RINGER Ref. 9854/41 CONNECTION IN PARALLELTO 1 VIDEO DOOR PHONE CALL
CALL REPEATER RELAY CONNECTION FOR CONTROLLING A SUPPLEMENTARY RINGER
CONNECTION OF A SECONDARY ELECTRICAL LOCK ............................................................................ SV102-3217B ................5............. 12
ONE DOOR PHONE Ref. 1133 CONNECTION IN PARALLEL TO THE VIDEO DOOR PHONE
ONE ATLANTICO VIDEO DOOR PHONE CONNECTION IN PARALLEL TO THE VIDEO DOOR PHONE...SV102-3218 ................5 ............. 13
ONE AND TWO-FAMILY VIDEO KIT Mod. 956 WITH ARTICO VIDEO DOOR PHONE
EQUIPMENT ..........................................................................................................................................................................................5............. 14
ACCESSORIES......................................................................................................................................................................................5 ............. 14
SPARE PARTS ......................................................................................................................................................................................5............. 14
TECHNICAL FEATURES.......................................................................................................................................................................5 ............. 14
WIRE SECTIONS...................................................................................................................................................................................5............. 14
CAMERA UNIT.......................................................................................................................................................................................5............. 15
Installation ..........................................................................................................................................................................................5 ............. 15
VIDEO DOOR PHONE...........................................................................................................................................................................5............. 17
Installation ..........................................................................................................................................................................................5 ............. 17
POWER SUPPLY...................................................................................................................................................................................5............. 17
ONE FAMILY KIT CONNECTION Ref. 956/31 .............................................................................................. SV102-2082C ................5............. 18
TWO-FAMILY KIT CONNECTION Ref. 956/32.............................................................................................. SV102-2081B ................5............. 19
CONNECTION OF 2 ARTICO VIDEO DOOR PHONES IN PARALLEL........................................................ SV102-2135C ................5 ............. 20
CONNECTION OF 2 VIDEO DOOR PHONES TO 2 VIDEO DOOR UNITS. INDIVIDUAL CALLS
FROM VIDEO DOOR UNIT...............................................................................................................................SV102-3225 ................5 ............. 21
CONNECTION OF 1 DOOR PHONE IN PARALLEL TO 1 VIDEO DOOR PHONE
SIMULTANEOUS OPENING OF 2 LOCKS ................................................................................................... SV102-2136E ................5 ............. 22
CONNECTION OF SUPPLEMENTARY RING Ref. 9854/41 IN PARALLEL TO VIDEO DOOR PHONE CALL
CONNECTION TO CALL REPEATER RELAY FOR CONTROLLING A SUPPLEMENTARY RINGER .......SV102-2137D ................5 ............. 23

sec.5
−−−−
3
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE
PANEL
The “audio two” door phone kit is used to make one-family door
phone systems with electrical door lock release using only two wires to
connect the door phone to the door unit.
The following Audio Two door phone kits are available:
• With plastic panel Ref. 1129/10
•With zama vandal-proof panel Ref. 1129/21
NOTE: the panels with plastic casing are provided with 35 x 56mm
name tags; those with zama casing are provided with 15 x
56mm name tags.
A conversation can be established by picking up the door phone
handset after receiving a call from the door unit.
In addition to an auxiliary button for supplementary services (e.g.
switching on staircase lights, operating electrical door locks, etc.),
the door phone is equipped with a control for adjusting call volume.
Maximum, minimum or mute volume can be selected. A red tab will
appear on the right-hand side of the door phone to indicate that the call
tone has been muted.
An additional ringer (Ref. 9854/41) can be connected to the door
phone. The additional ringer output level is fixed and does not depend
on the door phone ringing level setting.
The volumes can be adjusted during installation by means of the
loudspeaking unit controls.
The name tag on the speaker is back-lit with 2 LEDs.
The electric lock can be operated at the end of the conversation by
pressing the button on the door phone.
A mechanically released electric lock must be used (single pulse
opening).
The maximum distance between the transformer and the door unit
must be less than 110m.
DEVICES
The base kit has the following devices:
• Atlantico door phone with door opening button and 1 supplementary
button.
• Smyle Door speaker unit with one call button.
• Power transformer 230/12Vac.
ACCESSORIES
The following accessories may be purchased separately:
• Additional ringer Ref. 9854/41
• Additional door phone buttons Ref. 1133/55
• Tabletop installation support Ref. 1133/50
• Supplementary door phone (6 wires) Ref. 1129/51
SPARE PARTS
The following spare parts are provided for repairs:
• Atlantico Door phone Ref. 1129/110
• Door unit Ref. 1129/112
• Transformer 230/12Vac Ref. 9000/230
TECHNICAL FEAUTURES
Power supply: 230Vac ± 10% 50-60Hz
Transformer output: 12Vac (nominal)
Transformer power: 18VA max.
Protection Electronic: electronic fuse PTC (*)
Electrical lock: 12Vac
Power unit-door unit distance: Max. 110m
Wire cross-section area:
distance = 60m 0,5mm2
distance = 90m 0,75mm2
distance = 110m 1mm2
(*) Disconnect the main power for at least 60” to reset the power unit
if the PTC trips due to overload or short-circuit.
PANEL INSTALLATION
• Remove the name tag light circuit.
• Extract the door unit from the base.
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL
DEVICES - ACCESSORIES - SPARE PARTS
TECHNICAL FEAUTURES - PANEL INSTALLATION
PRI
ø 4 mm
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL

4
−−−−
sec.5
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
•Fasten the base onto a flat wall at the height shown in the figure
using the bolts provided.
NOTE: the panels with plastic casing may also be fixed in a flush-
mounting box Mod. 503 as shown below.
• Insert the door unit into the compartment in the based and connect
the wires (it is advisable to have approximately 40-45mm of wire
protruding from the wall).
• Fasten the name tag light circuit making the wires pass underneath
the support.
• Adjust volume. Volume is calibrated to optimal values during
production. Change the settings when needed only.
• Write the name on the name tag and insert in the housing.
• Insert the front part of the panel on the base and fasten it with the
socket head screw using the wrench (2mm) provided.
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL
PANEL INSTALLATION
1,55 m ÷1,65 mm
Mod. 503
CLICK
Rossi
Rossi
CLICK
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL

sec.5
−−−−
5
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL
APARTMENT STATION INSTALLATION
TRANSFORMER INSTALLATION
APARTMENT STATION INSTALLATION
To remove the door phone top, lever with the tip of a screwdriver in the
area shown and remove it by turning it on the upper tabs.
Use the holes on the base to fasten the door phone to the wall. Use
the bolts provided with each device.
NOTE: fasten the door phone to the call with the bolts provided for
flush-mounting in Mod.503 boxes.
Refit the door phone top after installation.
The handset connector telephone plug into the door phone base.
ADJUSTING THE CALL VOLUME
TRANSFORMER INSTALLATION
Before connecting the transformer to the mains, disconnect the mains
switch.
Fit the protective cover on the network terminals after connecting the
system.
Disconnect the mains power supply for 60” to reset the transformer if
the PTC thermal switch trips due to overload or short-circuit.
Use lever “A” to remove the transformer fitted on a DIN rail.
1,55 m
Mod. 503
Red
MUTE
No calling
tone
MIN
Minimum
calling volume
MAX
Maximun
calling volume
Wall fitting
PRI
Fitting to DIN rail
NO OK
A
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL

6
−−−−
sec.5
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
CONNECTION OF A SUPPLEMENTARY DOOR PHONE IN
PARALLEL TO A MAIN DOOR PHONE IN A ONE-FAMILY 2-WIRE
AUDIO KIT SC101-1308A
WIRING DIAGRAMS
NOTE: a total of up to 5 devices (1 main door phone and 4 door phones Ref.1129/51, or 2 door phones Ref.1129/51 with 2 supplementary ringers
Ref. 9854/41) may be installed.
The supplementary ringers Ref.9854/41 must be connected to terminals S+, S-. The ringers connected to terminals S+ and S- of the main
door phone are connected to the main door phone calling volume trimmer while the ringers connected to the supplementary door phones
Ref. 1129/51 will always ring at the maximum possible volume.
CONNECTION OF ONE FAMILY 2-WIRE AUDIO KIT WITH AN ADDITIONAL RINGER
˜ ˜ ˜12
0
12
0
S- S+
2
1
2
1
SE1
SE2
AP1
AP2
K Z
Mains~
Transformer
Door phone
Ref.1129/110
Electric lock
12Vca-15VA
Door
release
button
Door speaker unit
Ref.1129/112
Additional
ringer
Ref.9854/41
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL
WIRING DIAGRAMS
Lock
release
Electric lock
Door phone
Ref.1129/51
Door phone
Ref.1129/110
Transformer
Mains~
Panel
Ref.1129/112
SE1
SE2
2
1
AP2
AP1
~~ ~12 ~0
2
1
S-
S+
12
0
12 S-
S+
1
2C
2
1
2
3
4
12 S-
1
2C
S+
2
SE1
SE2
2
1
AP2
AP1
~~ ~12 ~0
12 S-
1
2
2C
S+
12 S-
1
2
2C
S+
1
S-12
02
S+
12 S-
1
2
2C
S+
Door phone
Ref.1129/51
Door phone
Ref.1129/110
Lock
release
Electric
lock
Panel
Ref.1129/112
Transformer
Mains~
CONNECTION OF 4 SUPPLEMENTARY DOOR PHONES IN
PARALLEL TO A MAIN DOOR PHONE IN A ONE-FAMILY 2-WIRE
AUDIO KIT SC101-1309A
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL

sec.5
−−−−
7
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
2-WIRE ONE FAMILY VIDEO KIT
DEVICES - ACCESSORIES - SPARE PARTS
TECHNICAL FEAUTURES - WIRE CROSS-SECTION AREA
2-WIRE ONE FAMILY VIDEO KIT
The Urmet Domus Video Kits can be used to make one-family video
door phone systems without coax wire using only two wires to connect
the video door phone to the video door unit.
The following versions of the Video Two one-family kits are available:
•Black/white with plastic panel Ref. 952/11
• Colour with plastic panel Ref. 952/41
• Black/white with zama vandal-proof panel Ref. 952/21
• Colour with zama vandal-proof panel Ref. 952/51
NOTA:the panels with plastic casing are provided with 35 x 56mm
name tags; those with zama casing are provided with 15 x
56mm name tags.
Conversation between door unit and apartment unit can only be
established after the apartment unit has been called.
Call is two-tone electronic. The camera fits a high-sensitivity semi-
pinhole camera. The subject is illuminated by LEDs. The video door
phone has a door opener button and two special function buttons
(auto-on, staircase lights, etc.).
System block chart
Press the button on the panel: the call is sent to the monitor and the
picture will appear after approximately 4 seconds.
The call tone will last for approximately five seconds.
Lift the handset to stop the call tone and speak with the video door
phone.
The monitor switch-on is timed (approximately 90 seconds). Any
subsequent call or automatic switch-on will reset the timer.
DEVICES
The basic product configuration is as follows:
• One button camera unit.
• Video door phone with bracket Atlantico style.
• Power supply.
ACCESSORIES
The following accessories can be purchased separately:
• Max 1 supplementary ringer Ref. 9854/41
or
• Max 1 supplementary door phone Ref. 1133
or
• Max 1 Atlantico supplementary Videodoorphone
black and white Ref. 1702/1
colour Ref. 1702/40
• Table mounting kit Ref. 1702/92
• Coloured mask kit Ref. 1702/50
• Wall bracket for supplementary video door phone Ref. 1202/90
SPARE PARTS
The following spare parts are provided for repairs:
• Power supply Ref. 952/100
• Camera unit
black and white Ref. 952/112
colour Ref. 952/113
• Atlantico video door phone
black and white Ref. 1702/1
colour Ref. 1702/40
• Bracket for Atlantico videodoor phone Ref. 952/111
• Spare handset Ref. 1702/101
TECHNICAL FEAUTURES
VIDEO DOOR PHONE B/W (black and white) version
Power supply: 26Vdc
Kinescope: 4” Flat
Resolution: 450 TV lines
Ringer: electronic two-tone
Dimensions: 218 x 220 x 80mm
VIDEO DOOR PHONE (Colour version)
Power supply: 26Vdc
Kinescope: 4” colour LCD
Resolution: 234 TV lines
Ringer: electronic two-tone
Dimensions: 218 x 220 x 80mm
CAMERA UNIT B/W (black and white) version
Camera: CCD 1/3”
Lighting: infrared LED
Power supply: 18Vdc
Timer: approximately 90”
Dimensions: 185 x 99 x 35mm
CAMERA UNIT (Colour version)
Camera: CCD 1/4”
Lighting: White LEDs
Power supply: 18Vdc
Timer: approximately 90”
Dimensions: 185 x 99 x 35mm
POWER SUPPLY
Power supply: 110/230Vac ± 10% 50/60Hz
Power: 38VA
Secondary unit: 26Vdc 0.9 A (timed 20%)
Protections: with PTC thermal switch (*)
Dimensions: 96 x 126 x 75mm
Weight: 1.1kg
(*) To restore the power supply if the PTC thermal switch trips
following overload or short-circuit, power the unit down for 60
seconds or longer.
WIRE CROSS-SECTION AREA
Distance 50m 100m
Power supply/Videodoor phone mm2 0,50 --
Videodoor phone/Camera mm2 0,50 0,75
NOTE: the basic kit connections are not polarised.
2
2
2
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL Ref. 1129/10

8
−−−−
sec.5
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
PANEL
The camera unit is supplied complete with:
• Semi pin-hole camera.
• Led for lighting.
• Front plate with 1 button.
• Electronic circuit.
• Lamp for lighting the name tags.
Adjust volume (to be adjusted only when needed) and camera
position.
INSTALLATION
• Remove the name tag light circuit.
• Extract the door unit from the base.
•Fasten the base onto a flat wall at the height shown in the figure
using the bolts provided.
NOTE: the panels with plastic casing may also be fixed in a flush-
mounting box Mod. 503 as shown below.
• Insert the door unit into the compartment in the based and connect
the wires (it is advisable to have approximately 40-45 mm of wire
protruding from the wall).
99 mm 35 mm
185 mm
ø 4 mm
1,55 m ÷1,65 mm
Mod. 503
2-WIRE ONE FAMILY VIDEO KIT
PANEL
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL Ref. 1129/10

sec.5
−−−−
9
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
• Fasten the name tag light circuit making the wires pass underneath
the support.
• Adjust volume and camera position. Volume is calibrated to optimal
values during production. Change the settings when needed only.
•Set the electrical lock operating time by shifting the jumper to the
required position.
• Write the name on the name tag and insert in the housing.
• Insert the front part of the panel on the base and fasten it with the
socket head screw using the wrench (2mm) provided.
CLICK
5°
10°
5°5°
DOOR OPENER TIME
PROGRAMMING
= 1" default
= 3"
= 5"
Rossi
Rossi
CLICK
2-WIRE ONE FAMILY VIDEO KIT
PANEL
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL Ref. 1129/10

10
−−−−
sec.5
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
VIDEO DOOR PHONE
This wall-mounted video door phone apartment station with next
generation flat 4” kinescope screen does not need to be flush-mounted
given the minimum protrusion from the wall.
Installation is extreme simple and fast because the connections are
shown on the terminal boards arranged on the bracket.
The main characteristics of the video door phone are:
• Adjustable and mutable call volume. The adjustment wheel appears
red when the volume is muted.
NOTE: when volume is set to “MUTE” the video door phone will not
ring but the video module will light up.
• Door opener button is lit up and green when video module is on.
•
Servicebuttons ( and )foractivating,forexample,supplementary
electrical locks, staircase lights, video door phone auto-on function,
etc.
• Adjustable brightness and contrast.
INSTALLATION
1) Arrange the duct so that it ends in correspondence with one of the
input holes.
2) Fasten the bracket to the wall at the height from the floor shown by
means of the four screws.
3) Connect the wires to the specific terminals.
4) Check that switch on back of video door phone is in the A
position.
5) Extract the retainer hook Aby inserting the tip of a screwdriver and
pulling the hook downwards.
6) Fasten the monitor to the bracket as shown in the figure.
7) Fasten the monitor by pushing the retainer hook Aupwards.
POWER SUPPLY
The power supply unit provides power to the entire system. It is
connected to the monitor by means of two wires. It can be wall-fitted or
fitted on DIN bar.
The power supply unit must be installed in dry places protected from
weather conditions.
126mm in length correspond to seven 18mm modules, as per DIN
43880 standard.
218 mm 80 mm
220 mm
Door opener button
Call volume control and adjustment
/
Mute function
Auxiliary buttons
Brightness adjustment
Contrast/Colour
adjustment
A
1,55 m
Bracket
A
B
126 mm
75 mm
90 mm
96 mm
2-WIRE ONE FAMILY VIDEO KIT
VIDEO DOOR PHONE -POWER SUPPLY
‘AUDIO TWO’ DOOR PHONE KIT WITH SMYLE PANEL Ref. 1129/10