V-TAC OUTDOOR Series User manual

In case of any query/issue with the product, please reach out to us at: [e-mail]
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.
INSTRUCTION MANUAL
OUTDOOR SERIES
LED BOLLARD LAMP
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL VT-1187
SKU 10475, 10476
23051, 23052
WATTS 4W
LUMENS 390 Lm [@360°Sphere]
INPUT POWER AC: 220-240V, 50/60Hz
BEAM ANGLE 90°
ADJUSTABLE ANGLE 300°
CRI ≥80
LIFE SPAN 20,000 Hours
MATERIAL Aluminium+Glass
OPERATING TEMPERATURE -20°C to +45°C
DIMENSION 129x159x1000mm

• Please make sure to turn o the power before starting the installation.
• Installation must be performed by a qualified electrician.
• The light source of this luminaire is not replaceable, when the light source reaches its end of
life the whole luminaire should be replaced.
• Proper grounding should be ensured throughout the installation.
INSTRUCTIONS FOR THE LIGHT
INSTALLATION DIAGRAM
1 3
4 5 6
2
This marking indicates that this
product should not be disposed of
with other household wastes.
Caution, Risk of electric shock
*This product contains a light source of energy eciency class<F>, where <F> shall
be replaced by the energy class of the contained light source.

1. Turn o the power switch.
2. Pull out the driver module.
3. Connect to the power supply according to the drawing.
4. Fix the base on the ground with the screws.
5. Adjust the angle of the luminair.
6. Switch on the power.
INSTALLATION INSTRUCTIONS
DISASSEMBLY DIAGRAM
Replaceable (LED only)
light source by a professional