V-TAC VT-8056 User manual

INSTALLATION INSTRUCTION
Model: VT-8056
UP/DOWN SOFT LIGHT-OUTDOOR
WEEE Number: 80133970
INTRODUCTION
Thank you for selecng and buying V-TAC LED Up/down so light-outdoor. V-TAC
will serve you the best. Please read these instrucons carefully before starng
the installaon and keep this manual handy for future reference. If you have any
other query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best.

TECHNICAL PARAMETERS
LED
parameter
Performace
parameter
Lamp warm white
350 lm
3000K 4000K
≥80
≥30000Hrs
500Vac/1min
100LM/W
60PCS
12C5B
36 - 39V
240mA
0.9
240mA, 30-80V
PC
calss I
IP65
173 x 81 x 46mm
-30°C ~ 85°C, 0% - 95% R.H.
-25°C ~ 50°C, 10% - 90% R.H.
/
100~240Vac, 50/60Hz
less than 3% within 1000 working hours
COB LED
9W
90°
6400K
380 lm 400 lm
cool white
natural white
Lumens (lm)
Color temperature (K)
CRI
Type of LED
Decay rate (%)
Total power (W)
Lifespan (Hrs)
High voltage testing
Lighting efficiency
Series-parallel way
Voltage
Current
Input parameter
Power factor
Output paremeter
Material
Dimension
Cut - out
Protection class
IP
Application hotel, home-lighting, recreation place, supermarket
office building
Operating temperature
Storage temperature
Qty / Ctn N.W G.W
carton size
Chip quantity
Beam angle
Packing
specification
Environment
parameter
Structure
parameter
Driver
specification

STRUCTURE & SIZE

INSTALLATION INSTRUCTION
In case of any query /issue with the product please reach out to us at [email protected]om
1. Switch off the power.
2. To drill the appropriate holes on the wall. (picture 1)
3. Enter the parcles and install the lamp base on the wall. (picture 2)
4. Connect the light into the mains (100-240V), install the lampshade
and cover the shell. (picture 3)
5. Switch on the power if above steps are done properly without any mistakes.