V-TAC VT-7506 User manual

In case of any query/issue with the product, please reach out to us at: [e-mail]
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.
INSTRUCTION MANUAL
LED TABLE LAMP
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL VT-7506
SKU 10345, 10346
WATTS 5W
LUMENS 500 lm
COLOR TEMPERATURE 3000K
IP RATING IP20
BEAM ANGLE 60°
MATERIAL Iron
INPUT POWER AC 200-240V, 50Hz
DIMENSION Ø150x455 mm

1. Please make sure to turn o the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable; when the light source reaches its end of
life the whole luminaire shall be replaced.
4. For Indoor Use only
Note: This light is designed with adjustable height, press the pin on the cano-
py to adjust the height of the light.
INSTRUCTIONS FOR THE LIGHT
INSTALLATION DIAGRAM
This marking indicates that this
product should not be disposed of
with other household wastes.
Caution, Risk of electric shock
Replaceable Light Source
by professionals
Replaceable by
professionals
*This product contains a light source of energy eciency class<F>, where <F> shall be re-
placed by the energy class of the contained light source.

DIAGRAM FOR REPLACING THE LIGHT SOURCE
[BY PROFESSIONALS ONLY]
DIAGRAM FOR REPLACING CONTROL GEAR
[BY PROFESSIONALS ONLY]
3
3
6
1
1
4
4
7
2
2
5
5
Replaceable (LED only) light
source by a professional
Replaceable Control
Gear by a professional
Disassemble the blue and brown wire of the old
drive and replace it with the new drive
Fasten the drive cover with screws,
place the drive into the luminaire base,
and install the base pad
Remove the rubber pad from the lamp Remove drive cover