
6TJOHUIF&)4DBCMF - Connect the headset to a
SNOM D7 (except SNOM D785) Series IP phone
Take the &)4DBCMF. Plug the end labelled
to the &)4 jack
(red dot) of the headset base.
Plug the other end labelled &)4+"$,0/1)0/&#"4&to
the EHS jack on your SNOM phone.
Take the )FBETFUBVEJPDBCMF. Plug the end labelled
to the 1)0/& jack
(blue dot) of the headset base.
Plug the other end labelled )&"%4&5"6%*0+"$,0/1)0/&#"4&
to the audio port on your SNOM phone.
5. On your SNOM D7 series IP Phone, press to turn on the
headset mode. The LED light on the key will turn on.
5PUFTUUIFIFBETFUBGUFSDPOOFDUJPO
Press
the
0/0''button
on the headset to make, answer,
or end a call, using the telephone line to which the IP phone is
connected.
/05&4
Make sure you orient the &)4DBCMF correctly when plugging it
into the EHS jack on the SNOM D710/D712/D715/D725/D745/
D765 IP phone. Do not plug it upside down; otherwise, the EHS
connection will not be successful.
Refer to the user’s manual of your SNOM IP phones for the
actual locations of the EHS jack and audio port.
1.
2.
3.
4.
•
•
&)4DBCMF
(for 4/0.%%
%%%%
IP Phone)
)FBETFU
BVEJPDBCMF
To the EHS jack on
4/0.%%%
%%% IP Phone
To the audio port
labelled on 4/0.
%%%%
%%IP Phone