V-tech Bright Lights Baby Ball User manual

®
LITTLE SMART
USER'S MANUAL
™
© VTECH
Printed in China
91-01259-000

1
Dear Parent:
At VTech®we know that a child has the ability to do great things. That’s
why all of our electronic learning products are uniquely designed to
develop a child’s mind and allow them to learn to the best of their ability.
Whether it’s introducing numbers and letters, identifying colors and
shapes, or stimulating senses with lights and music, all VTech®infant
and toddler learning products encourage your child’s natural growth
and discovery skills.
When it comes to providing electronic learning products that enlighten,
entertain and develop minds, at VTech®we see the potential in every
child.

2
INTRODUCTION
Thank you for purchasing the VTech® LITTLE SMART Bright Lights
BabyTM Ball learning toy! We at VTech®are committed to providing the
best possible products to entertain and educate your child. Should you
have any questions or concerns, please call our Consumer Services
Department at 1-800-521-2010 in the U.S., 1-800-267-7377 in Canada,
or [phone] in the U.K..
The LITTLE SMARTBright Lights BabyTM Ball learning toy is a musical
light-up play ball for infants 6 months and up. With just one roll, Baby
is treated to a show of sound effects, song, and lights. The LITTLE
SMARTBright Lights BabyTM Ball learning toy also features large col-
orful character buttons which identify Mommy and Daddy as well as
friendly animal pals and their sounds.
LARGE CHARACTER
BUTTONS FLASHING STAR
LIGHTS
SPEAKER ON/OFF/MODE
SELECTOR SWITCH VOLUME CONTROL
SWITCH
BATTERYCOVER

3
INCLUDED IN THIS PACKAGE
•One VTech®LITTLE SMARTBright Lights BabyTM Ball learning toy.
•One instruction manual.
WARNING: All packing materials such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be dis-
carded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locatethebatterycoveronthe bottom
of the ball. Use a coin or screwdriver
to loosen the screw.
3. Install 2 new “AA” (UM-3/LR6) batter-
ies following the diagram inside the
batterybox. (Theuseofnew, alkaline
batteries is recommended for maxi-
mum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.

4
BATTERY NOTICE
•Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
•Do not mix old and new batteries.
•Do not use batteries of different types.
•Removeexhausted or newbatteries from theequipmentwhen theunit
will not be used for an extended period of time.
•Do not dispose of batteries in fire.
•Do not attempt to recharge ordinary batteries.
•The supply terminals are not to be short-circuited.
WE DO NOT RECOMMENDTHE USE OF RECHARGEABLE BATTER-
IES.
NOTE: Iffor some reasontheprogram/activity stops working, thenplease
follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn theunit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S., 1-800-267-7377 in
Canada, or [phone] in the U.K., and a service representative
will be happy to help you.

5
TO BEGIN PLAY
1. To begin play, slide the ON/OFF
MODE SELECTOR SWITCH toeither
theMUSIC MODE( ) orTALKING
MODE ( ) position. The LITTLE
SMART Bright Lights BabyTM Ball
learning toy will play a few musical
notes.
2. Press any button to begin play.
3. Roll or rotate the ball to hear a funny
sound effect followed by a cheerful
melody. Starlightswill flashalongwith
the sound and music.
4. SlidetheON/OFF/MODE SELECTOR
SWITCH to the OFF position ( ) to
turn the unit OFF.

6
5. To adjust the volume, slide the
VOLUME CONTROLSWITCHlocated
on the bottom of the ball to the ( )
position for LOWVOLUME or to the
( ) position for HIGHVOLUME.
Note: Without input after severial minutes the unit will go into a power-
down mode to conserve battery power. The unit can be restarted
by pressing any button.
ACTIVITIES
A. Talking Mode ( )
1. SlidetheON/OFF/MODE SELECTOR
SWITCHtotheTALKINGMODE( )
position. A short tune will play and
star lights will flash along with the
sound.

7
2. Press the Mommy or
Daddy Character But-
ton to hear a friendly
voice say “Hello Baby!”
or“Bye-Bye”. Star lights
will flash along with the
voice.
3. Press an Animal Char-
acter Button to hear a
friendlyvoice identify the
animal followed by a
sound effect. Star lights
will flash along with the
voice.
B. Music Mode ( )
1. SlidetheON/OFF/MODE SELECTOR
SWITCH to the MUSIC MODE ( )
position.Ashorttune will play and star
lights will flash along with the sound.

8
2. Press any Character
Button to hear a cheer-
ful melody. Star lights
will flash along with the
music.
SIX CHEERFUL MELODIES:
•Pat-A-Cake
•Pop! Goes the Weasel
•SkipTo My Lou
•TwinkleTwinkle Little Star
•Row Row RowYour Boat
•TheTeddy Bears’ Picnic
3. PresstheKitten,Puppy
or Bunny Character
Button asecondtime to
hear the animal charac-
ter sing a melody. Star
lights will flash along
with the song.

9
CARE AND MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
IMPORTANT NOTE
Creatingand developing infant/toddlerproducts is accompaniedby a responsibilitythat weat
VTech®take very seriously. We make every effort to ensure the accuracy of the information
which forms the value of our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage you to call our Consumer
Services Department at 1-800-521-2010 in the U.S., 1-800-267-7377 in Canada or (01235)
546810 in the U.K. with any problems and/or suggestions that you might have. A service
representative will be happy to help you.
Note:
This equipment generates and uses radio frequency energy and if not installed and used prop-
erly, that is, in strict accordance with the manufacturer’s instructions, it may cause interference to
radio and television reception. It has been type tested and found to comply within the limits for a
Class B computing device in accordance with the specifications in Sub-part J of Part 15 FCC
Rules, which are designed to provide reasonable protection against such interference in a resi-
dential installation. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference with radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•reorient the receiving antenna
•relocate this product with respect to the receiver
•move this product away from the receiver