V-tech Disney Go! Go! Smart Wheels Mickey Mouse... User manual

© Disney
www.disney.com 91-003980-000
Instruction Manual
Mickey Mouse Café

2
INTRODUCTION
Thank you for purchasing the Go! Go! Smart Wheels®- Disney
Mickey Mouse Café.Take Mickey Mouse and the Food Truck on a ride
to pick up food and make deliveries, triggering the three SmartPoint®
locations along the way. Plus, turn the chef’s hat, spin the gears, open
and close the door and windows, and move the elevator up and down
for even more sensory play.
SmartPoint® Mickey Mouse
Food Truck
Elevator
3SmartPoint®
Locations

3
INCLUDED IN THE PACKAGE
One rotary sign One left
castle support
One SmartPoint®
elevator platform
One chef’s hat One castle roofOne SmartPoint®
Mickey Mouse Food Truck
One SmartPoint®
main track
One pickup window One takeout bag
One gate armOne left wall One castle
back support

4
One track
support
One slide track Two 90-degree
bulge tracks
One standard-
length track
Three 1/3
length bulge tracks
One SmartPoint®
castle floor
One castle One big gear One small gear
•One Quick Start Guide
One castle door One label sheetOne platform support

5
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes, cordons et vis d’emballage. Ils ne font pas partie du jouet.
NOTE
Il est conseillé de conserver ce guide des parents car il comporte des
informations importantes.
Adult assembly required.
Ce jouet doit être assemblé par un adulte.
Unlock the Packaging Locks
GETTING STARTED
Battery Removal and Installation
Food Truck
1. Make sure the unit is turned Off.
2. Find the battery cover located on
the bottom of the unit, use a coin or
screwdriver to loosen the screw and
then open the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.
Pull out the packaging locks and discard.
Turn the packaging locks counterclockwise
several times.

6
4. Install 2 new AAA (AM-4/LR03) batteries following the diagram
inside the battery box. (For best performance, alkaline batteries
or fully charged Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
IMPORTANT: BATTERY INFORMATION
• Insertbatterieswiththecorrectpolarity(+and-).
• Donotmixoldandnewbatteries.
• Donotmixalkaline,standard(carbon-zinc)or rechargeable
batteries.
• Onlybatteriesofthesameorequivalenttypeasrecommended
are to be used.
• Donotshort-circuitthesupplyterminals.
• Removebatteriesduringlongperiodsofnon-use.
• Removeexhaustedbatteriesfromthetoy.
• Disposeofbatteriessafely.Donotdisposeofbatteriesinfire.
RECHARGEABLE BATTERIES
• Removerechargeablebatteriesfromthetoybeforecharging.
• Rechargeablebatteriesareonlytobechargedunderadult
supervision.
• Donotchargenon-rechargeablebatteries.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

7
LABEL APPLICATION
Please securely stick the labels to the playset as indicated
below:
1
2
3
4
6
7
8
9
10
5
11 12
13

8
4
3
5 6
2
1
7 8
9
12 13
11
10

9
ASSEMBLY INSTRUCTIONS
Mickey Mouse Café
1. Attach the Castle Door onto the front wall of the Castle. Then,
attach both the Big Gear and the Small Gear onto the right side
of the front wall. A click sound will indicate the pieces are secure.
2. Attach the SmartPoint®Main Track into the slots on the front side
of the Castle Back Support. A click sound will indicate the pieces
are secure.
3. Set the Castle Back Support on its side. Insert the Left Wall into
the slot on the left side of the Castle Back Support, beneath the
SmartPoint® Main Track.
With the Go! Go! Smart Wheels®-Disney Mickey Mouse Café, safety
comes first. To ensure your child’s safety, adult assembly is required.

10
4. Turn the structure upright again and attach the Track Support
beneath the right side of the SmartPoint® Main Track.
5. Connect the pegs on the Left Wall and the SmartPoint® Main
Track to the slots on the back of the Castle.
6. Connect the SmartPoint®Castle Floor under the structure.
7. Attach the Platform Support to the Left Wall.