V-tech Gear Zooz Roll & Roar Animal Train User manual

Parent’s Guide
Roll & Roar Animal TrainTM
91-003372-000 US

2
2
2
INTRODUCTION
Thank you for purchasing the GearZoozTM Roll & Roar Animal TrainTM
by VTech®! This adorable train will take your little one on an exciting
learning adventure. Let your child create their own unique train by
mixing and matching the 15 included gears while strengthening their
ne motor skills and problem-solving techniques.
On/Off Activity Switch
2 Handle Gears9 Standard Gears
4 Smart Gear™ Animals
Pull Cord
Location Slider
Light-Up Instrument Buttons
Standard Pole
Purple Smart Pole Trigger Gear
Volume
Control Switch

3
3
3
INCLUDED IN THIS PACKAGE
• One VTech®Roll & Roar Animal TrainTM
• Four Smart GearTM animals
• Nine standard gears
• Two handle gears
• One parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.

4
4
4
Remove the Cable Ties:
Cut the ties with a pair of scissors.
Remove the ties.
Unlock the Smart GearTM Lion:
1. Slide the white tab to the right to unlock the Smart GearTM lion.
2. Lift the tab and Smart GearTM lion off the train engine.
3. Discard the white tab.
Pull out the Train Connector
1. Locate the orange train connector underneath the Bear’s Train Car.
2. Slide the train connector out until it clicks into place.

5
5
5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back side of
the unit and open it with a screwdriver.
3. Install 2 new AA size (AM-3/LR6) batteries
into the battery box as illustrated. (The use
of new alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in re.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.

6
6
6
PRODUCT FEATURES
1. On/Off Activity Switch
Slide the On/Off Activity Switch to choose an activity. To turn the
unit off, slide the switch to OFF.
2. Light-Up Instrument Buttons
Press the three Light-Up Instrument Buttons to learn about the
instruments, answer questions or create a melody.
3. Location Slider
Move the Location Slider to learn about the
locations, answer questions or choose a melody.
4. Purple Smart Pole
Place a Smart GearTM Animal on the Purple
Smart Pole to learn about the animal or add
fun animal sounds into the songs when you
pull the train.
5. Standard Poles
There are seven Standard Poles. Standard
Poles do not trigger electronic responses.
6. Trigger Gear
Turn the Trigger Gear to learn about the
train and locations, hear melodies or repeat a
question.
7. Pull Cord
Pull the train to hear fun songs and responses. Place a Smart
GearTM Animal on the Purple Smart Pole and pull the train to

7
7
7
hear fun animal sounds added to the songs.
8. Pull Cord Storage
To convert the unit from a push toy to a pull
toy, remove the pull cord from the storage
compartment on the bottom of the Roll & Roar
Animal Train™.
For your child’s safety we suggest you store the pull cord in the
compartment until your child is walking and to supervise your child
when playing with the pull cord.
9. Volume Control Switch
The Volume Control Switch is located on the back of the train
engine. Slide the switch to select Low or High volume.
10.Automatic Shut Off
To preserve battery life, the Roll & Roar Animal Train™ will shut
off automatically after several minutes without any input. The unit
can be turned on again by sliding the On/Off Activity Switch. The
unit will also automatically turn off when the batteries are very low.
We suggest replacing them with a new set of batteries.
TO BEGIN PLAY
Activate Normal Play Mode:
The Roll & Roar Animal Train™ is in try-me mode in the packaging. To
activate normal play mode, turn the unit on. Place any Smart Gear™
Animal on the Purple Smart Pole. You will hear the train whistle
notifying you that normal play mode has been activated.
Note: Be sure to remove the white tab from the Smart Gear™ lion
before playing.

8
8
8
ACTIVITIES
1. Exploration Fun
Move the Location Slider to learn about locations. Press the
Instrument Buttons to learn about instruments. Turn the Trigger
Gear to learn about the train and locations. Pull the train to hear
songs. If a Smart Gear™ Animal is on the Purple Smart Pole,
turn the Trigger Gear to learn about the animal or pull the train to
add animal sounds into the songs.
2. Quiz Mode
Listen to questions about the instruments or locations. Move the
Location Slider or press the Instrument Buttons to answer the
questions. Turn the Trigger Gear to repeat the question. Pull the
train to hear songs. Place a Smart Gear™ Animal on the Purple
Smart Pole to hear the animal name and animal sound. If a Smart
Gear™ Animal is on the Purple Smart Pole, pull the train to add
animal sounds into the songs.
3. Music Fun
Move the Location Slider to select a melody. Press the Light-Up
Instrument Buttons to add or remove instruments. The button
will light up when the instrument is added into the melody. Press
again to remove the instrument and the light will switch off. Turn
the Trigger Gear to add fun sounds into the melody. If a Smart
Gear™ Animal is on the Purple Smart Pole, turn the Trigger
Gear to add animal sounds into the melody. Pull the train to add
animal sounds into the songs.

9
9
9
4. Gears
Add and remove the Gears to create your own unique train. Then,
pull the train to watch the Gears move.
5. Mix & Match
Change the order of the train cars by
removing them from the train engine
and rearranging them.
6. Bear Handle
Turn the bear handle to make the
seesaw move up and down.
SONG LYRICS
Song 1:
All aboard, let’s take a ride.
It’s great with you by my side.
When we’re rolling down the tracks,
Just sit back and relax.
Song 2:
The train can take us here or there.
The train will take us anywhere!
We’ll go fast and we’ll go slow.
Let’s go, hear the horn blow!

10
10
10
Song 3:
Here we go! C’mon, hippo.
Tiger, hop in, watch the gears spin.
See ya later, alligator.
Hop inside, time to ride, off we go!
Song 4:
Come along and ride with me.
From the park, to the zoo, to the sea!
Song 5:
We will have such a fun-lled day!
I can’t wait for us to play!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the metal parts on the purple smart pole clean by wiping
them.
3. Keep the unit out of direct sunlight and away from any direct heat
source.
4. Remove the batteries when the unit is not in use for an extended
period of time.
5. Do not drop the unit on hard surfaces, and do not expose the unit
to moisture or water.