V-tech Go! Go! Smart Wheels Take Flight Airport Assembly Instructions

Parent’s Guide
91-003545-000 US
Take Flight AirportTM

2
2
2
2
INTRODUCTION
Thank you for purchasing the Go! Go! Smart Wheels®Take Flight
Airport™ by VTech®! Watch the adventurous Airplane come to life when
you fly him around the course and over the five SmartPoint®locations.
Launch the Airplane into the cloud, spin around the tower, or slide the
luggage up and down. Kids will have a blast while strengthening motor
skills and engaging in imaginative play.
LauncherCloud Platform
5 SmartPoint®Locations
SmartPoint®
Airplane

3
3
3
3
INCLUDED IN THIS PACKAGE
One ramp support
One ramp track sign
One airport base One fuel nozzle One ramp track
One cloud platform One launcher base One launcher handle
One airport
building
One launcher
platform
One launcher ring
One SmartPoint®
Airplane

4
4
4
4
Wind meter A & B
Two ¼ straight tracks One ¼ straight track,
female
Two cross tracks
One label sheet
One airport tower
One end track
One wind meter track
- One parent’s guide
One 60° track, male

5
5
5
5
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous les
produits d’emballage tels que rubans adhésifs, feuilles de plastique,
attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car il
comporte des informations importantes.
Unlock the packaging locks:
Turn the packaging lock counterclockwise
several times.
Pull out and discard the packaging lock.

6
6
6
6
GETTING STARTED
BATTERY INSTALLATION
Airplane
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the Airplane. Use a coin or screwdriver to
loosen the screw.
3. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the screw to secure the
battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.

7
7
7
7
Please adhere the labels to the playset
securely as indicated on the following pages
below:
1
2
4
3
5
7
8
9
6

8
8
8
8
1
7
5
2 4
7 7 7
3
8
69
7

9
9
9
9
ASSEMBLY INSTRUCTIONS
Take Flight Airport™
With the VTech®Go! Go! Smart Wheels®Take Flight Airport™,
safety comes first. To ensure your child’s safety, adult assembly is
required.
1. Insert the Airport Tower into the Cloud Platform, as shown below.
2. Insert the Airport Tower into the Airport Building. Then, attach
the Airport Building and Fuel Nozzle to the Airport Base, as
shown below.
3. Connect the Ramp Track Sign to the Ramp Track, as shown
below.

10
10
10
10
4. Attach the Ramp Support to the Airport Base.Then, connect the
Ramp Track to the Ramp Track Support, as shown below.
5. Attach the Launcher Ring to the Launcher Platform. Then,
connect the Launcher Platform and Launcher Handle to the
Launcher Base. Lastly, connect the Launcher Base to the Airport
Base, as shown below.