V-tech nickelodion PAW PATROL Pups to the Rescue Driver... User manual

© 2016 Spin Master PAW Productions Inc. All Rights Reserved.
PAW Patrol and all related titles, logos and characters are
trademarks of Spin Master Ltd. Nickelodeon and all related
titles and logos are trademarks of Viacom International Inc.
© 2016 PAW Spin Master Ltd/Spin Master Ent. International
Rights Secured. All rights reserved.
© 2016 VTech
All rights reserved
Printed in China
91-003229-020 US
Pups to the Rescue Driver
Instruction Manual

2
INTRODUCTION
Thank you for purchasing the PAW Patrol Pups to the Rescue
Driver!Just like Ryder’s ATV, this interactive driver also has
snowmobile and hovercraft modes for exciting role-play.
2
1
8
7
119 10
4
3
6
5
Adjustable Mirror
3
1Pup Buttons
Mode Selector
5
Horn Button
11
Light Button
9
7Handle Bars
2Slider
6Volume Switch
Ryder Button
10
LED Turn Signals
4
On/Off Switch
8

3
INCLUDED IN THIS PACKAGE
• One PAW Patrol Pups to the Rescue Driver
• Instruction Manual
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy, and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes, cordons et vis d’emballage. Ils ne font pas partie du jouet.
NOTE
Il est conseillé de sauvegarder ce manuel d’utilisation car il comporte
des informations importantes.
Unlock the Packaging Locks
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.

4
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned OFF.
2. Find the battery cover located on the
bottom of the unit, use a screwdriver
to loosen the screw and then open the
battery cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 2 new AA (AM-3/LR6) batteries
following the diagram inside the
battery box.
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Disposeofbatteriessafely.Donotdisposeofbatteriesinre.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

6
PRODUCT FEATURES
1. On/Off Switch /
To turn the unit On, turn the On/Off
Switch clockwise. Turn the On/Off
Switch counterclockwise to turn the
unit Off.
2. Pup Buttons
Press the Pup Buttons to learn
about each pup and help them complete
missions.
3. Mode Selector
Turn the Mode Selector to choose
ATV, hovercraft or snowmobile mode.
4. Light Button
Press the Light Button to turn on the
lights or answer the questions.

7
5. Horn Button
Press the Horn Button to honk the
horn or answer the questions.
6. Handlebars
Turn the Handlebars to pretend to drive
the ATV, snowmobile or hovercraft or
answer the questions.
7. Ryder Button
Press the Ryder Button to learn about
trafc safety and hear Ryder call the
pups to action.
8. Volume Control Switch
Turn the Volume Control Switch to
adjust the volume.
9. Automatic Shut-Off
To preserve battery life, the unit will automatically power off after
several minutes without input. The unit can be turned on again by
pressing any button.
Note: If the unit repeatedlypowersdownorthelightashesthenfades
out, we suggest changing the batteries.

8
ACTIVITIES
ATV Mode
Zoom to the rescue to save Mr. Porter’s
van lled with Pup Treats by turning the
Handlebars. Press the Pup Buttons to
learn more about the pups and how they
can help.
Hovercraft Mode
Help make sure the pups can hear Ryder
loud and clear. Press the Pup Buttons in
the correct order to advance to the next
challenge.
Snowmobile Mode
Rescue the penguins by answering Ryder’s
questions. Turn the Handlebars, honk the
Horn Button or press the correct Pup
Button to respond.

9
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-877-352-8697
in Canada, or by going to our web site at vtechkids.com and
lling out our Contact Us form located under the Customer
Support link. A service representative will be happy to help
you. Creating and developing VTech®products is accompanied
by a responsibility that we take very seriously. We make every
effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It
is important for you to know that we stand behind our products
and encourage you to contact us with any problems and/or
suggestions that you might have. A service representative will
be happy to help you.

10
NOTE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.