V-tech Hug-A-Ball User manual

®
LITTLE SMART
USER'S MANUAL
91-01373-000
© VTECH
Printed in China

1
Dear Parent:
At VTECH
®
we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTECH
®
Baby Development learning products
encourage your child’s natural growth and discovery skills. When
it comes to providing electronic learning products that enlighten,
entertain and develop minds, at VTECH
®
we see the potential in
every child.

2
INTRODUCTION
Thank you for purchasing the VTECH®LITTLE SMART Hug-A-Ball™
learning toy!Thisproductisone ofa familyof high-qualityLITTLESMART®
electronic learning products.We at VTECH®are committed to providing
the best possible products to entertain and educate your child. Should
you have any questions or concerns, please call our Consumer Services
Departmentat 1-800-521-2010 in theU.S.or1-800-267-7377 in Canada.
TheLITTLE SMART Hug-A-Ball™ learning toyis asoft and cuddlyplush
toy designed for infants.Flashing lights, fun sound effects and six built-in
melodies provide sensory stimulation for babies.
INCLUDED IN THIS PACKAGE
- One VTECH®LITTLE SMARTHug-A-Ball™ learning toy.
- One instruction manual.
WARNING:All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
OFF/LOW/HIGH
SWITCH
LIGHT-UP
SHAPES
ANIMAL
DESIGNS
BATTERY
CABINET
SPEAKER

3
BATTERY INSTALLATION
1. Make sure the unit is turned off.
2. Locatethe batterycoveronthe bottom
ofthe unit.Usea screwdrivertoloosen
the screw.
3. Install 2 new “AA” (UM-3/LR6)
batteries following the diagram inside
the battery box. (The use of new
alkalinebatteriesis recommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: Ifforsomereason theprogram/activitystops working, then please
follow these steps:
1. Please turn the unit off.
2. Interrupt the power supply by removing the batteries.
3.Let the unit stand for a few minutes, then replace the batteries.
4.Turn the unit on.The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department and a representative will be happy to help you.

4
TO BEGIN PLAY
1. Turn the Off/Low/High Switch to
the( )position forhighvolume or
to the ( ) position for low volume.
You will hear a short tune followed by
“Hello, let’s have a ball!”
2. Move the ball to hear an animal
sound effect followed by a melody or
a spoken phrase. For example, when
rolling the ball you will hear 1 of 6 animal
sound effects followed by 1 of 6 random
melodies. You may also hear“Hello, let’s
have a ball!” The animal lights will light
up with all sound.
3. Turn the Off/Low/High Switch to ( ) to
turn the unit off.
Note:Without input after30 seconds,the
unit will turn off automatically.
"Hello, let's
have a ball!"

5
CARE AND MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Removethe batterieswhen the unit isnot being used foranextended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
IMPORTANT NOTE
CreatinganddevelopingBabyDevelopmentproducts isaccompanied bya responsibilitythat
we at VTECH®take very seriously. We make every effort to ensure the accuracy of the
information which forms the value of our products.However, errors sometimes can occur.It is
important for you to know that we stand behind our products and encourage you to call our
ConsumerServicesDepartment at1-800-521-2010 in theU.S.or 1-800-267-7377 inCanada
with any problems and/or suggestions that you might have. A service representative will be
happy to help you.
Note:
Thisequipment generatesand usesradio frequencyenergy and ifnot installedand usedproperly,
that is, in strict accordance with the manufacturer’s instructions, it may cause interference to radio
and television reception.It has been type tested and found to comply within the limits for a Class
B computing device in accordance with the specifications in Sub-part J of Part 15 FCC Rules,
which are designed to provide reasonable protection against such interference in a residential
installation.However,thereis noguarantee thatinterferencewillnot occurin aparticularinstallation.
If this equipment does cause interference with radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• reorient the receiving antenna
• relocate this product with respect to the receiver
• move this product away from the receiver