V-tech Myla's Sparkling Friends Mia Assembly Instructions

Parent’s Guide
US CA
91-003822-000
TM

2
INTRODUCTION
Thank you for purchasing the Myla’s Sparkling Friends™Mia!
Hi, I’m Mia, welcome to my colorful world of magic! Press my
charm to choose a color, then touch my horn, eyes or wings to
decorate them with that color. Let’s have fun together!
Demo/Off/On
Switch
Eye Sensors
Mouth Button
Charm Button
Light-Up Horn
Button
Wing Sensor
Leg Lever
Hair Clips and Comb

3
INCLUDED IN THIS PACKAGE
• Myla’s Sparkling Friends™ Mia
• Two hair clips
• One comb
• Parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez- vous de tous les
produits d’emballage tels que rubans adhésifs, feuilles de plastique,
attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte des
informations importantes.
Rotate the packaging lock
counterclockwise several times.
Pull out the packaging lock and discard.
Unlock the Packaging Locks

4
NOTE:
There are two cable ties at the bottom of the wings. These ties are
packaging materials and should be discarded for your child’s safety.
ATTENTION :
DANGER D’ÉTOUFFEMENT -Petits éléments.
Ne convient pas aux enfants de moins de 3 ans.

5
GETTING STARTED
The batteries included are for demo purposes only. Please replace
the low capacity Try Me batteries with new batteries for the best
performance. Slide the Demo/Off/On Switch to the ON position to
start.
NOTE:
Playing at close range for a prolonged period of time may cause
fatigue or discomfort. We recommend that children take a 15-minute
break for every hour of play.
Battery Removal and Installation
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
back of the unit, use a screwdriver
to loosen the screw and open the
battery box.
3. Remove old batteries by pulling up
on one end of each battery.
4. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance).
5. Replace the battery cover and
tighten the screw to secure.

6
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity(+ and -).
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec des
usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant les
polarités + et - .
• Ne pas mettre les bornes d’une pile ou d’un accumulateur en
court-circuit (en reliant directement le + et le -) .
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de nonutilisation
prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

7
PRODUCT FEATURES
1. Demo/Off/On Switch
To turn the unit ON, slide the Demo/Off/On Switch to the ON
position. To turn the unit OFF, slide the Demo/Off/On Switch to
the OFF position.
2. Automatic Shut Off
To preserve battery life, Mia will automatically power down after
several seconds without input. The unit can be turned on again
by pressing the horn button, mouth button or charm button.
NOTE: If the unit powers down while playing, please install a
new set of batteries.
ACTIVITIES
1. Color Mia
Mia lights up in the colors you choose for her. Press Mia’s
Charm Button to choose a color. Then, touch her eyes, horn
and wings to add the selected color to them.

8
2. Mia’s Mood
Mia expresses her mood through color. Press
her Light-Up Horn Button to see how she
feels. Then, touch her eyes or wings for some
additional color commentary.
3. Color Fun
Mia likes to pick a lucky color for you. Press
her Wing Sensor and she’ll select a lucky
color and tell you how that color makes her
feel.
4. Tell Mia Your Wishes
Mia wants you to share your wishes and
dreams with her. Cover and hold one of Mia’s
Eye Sensors and she’ll ask you to tell her
your wishes. Keep her Eye Sensor covered
as you tell her. Uncover her Eye Sensor
and she’ll tell you how much she loves your
wishes.
5. Musical Mia
Mia loves to sing. Tap Mia’s Mouth Button,
and she will sing, hum or even surprise you
with a kiss! Careful, sometimes she even
burps!
6. Flying Fun
Mia loves to fly! Help her flap her wings by
pressing her Leg Lever. She’ll make magical
sounds and cheer as she pretends to zoom
through the sky.

9
7. Cuddle and Care
Every unicorn needs love. Pet Mia’s Eye Sensors or Wing
Sensor to take care of her and get some fun surprises.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on a hard surface and do not expose the unit
to excess moisture.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit will now be ready to play again.
5. If the unit still does not work, install a new set of new batteries.

10
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. 1-877-352-8697
in Canada, or visit our website vtechkids.com and fill out our
Contact Us form located under the Customer Support link.
Creating and developing VTech products is accompanied by a
responsibility that we take very seriously. We make every effort
to ensure the accuracy of the information, which forms the value
of our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products
and encourage you to contact us with any problems and/or
suggestions you might have. A service representative will be
happy to help you.
CAUTION:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.