V-tech Winnie the Pooh Pop-Up Honey Pot User manual

© Disney Based on the “Winnie the Pooh” works
by A.A. Milne and E.H. Shepard.
Visit the Disney Website at www.disney.com/pooh
©2007 VTech Printed in China
Pop-Up Honey Pot
Pop-Up Honey Pot

Dear Parent,
At VTech
®
we know that a child’s imagination is a truly wonderful thing
and needs to be developed and nurtured. That’s why we created the Winnie
the Pooh electronic learning series™of interactive learning toys to
stimulate children’s imaginations, while also teaching vital preschool
concepts such as the alphabet, numbers, shapes, colors and objects.
Through the use of unique technology and engaging child-directed role-
play scenarios, Winnie the Pooh characters magically come to life to
guide children through learning activities. These engaging characters
foster children’s critical reasoning skills, enhance their fine motor skills
and engage them in exciting role-play activities for endless hours of
learning fun.
At VTech
®
we know that a child has the ability to do great things. That’s
why all of our electronic learning products are uniquely designed to
develop a child’s mind and allow them to learn to the best of their ability.
We thank you for trusting VTech
®
with the important job of helping your
child learn and grow!
Sincerely,
Your Friends at VTech
®
To learn more about Winnie the Pooh electronic learning series™and
other VTech
®
toys, visit
www.vtechkids.com

2
Introduction
INTRODUCTION
Thank you for purchasing the VTech®Pop-Up Honey Pot!
Little ones will have lots of fun with the Pop-Up Honey Pot. Press the light-
up Tigger button to see Pooh appear, then push him back down to play
again and again! Features a chunky music button for cheerful melodies
and cute songs. Fun sounds and phrases add to the enjoyment as your
child develops hand-eye coordination and grasps the concept of cause
and effect. Learning has never been so much fun!
LIGHT-UP
TIGGER BUTTON
POP-UP
WINNIE THE POOH
ON/OFF/VOLUME
CONTROL SWITCH
MUSIC BUTTON

33
INCLUDED IN THIS PACKAGE
- One VTech®Pop-Up Honey Pot.
- One User’s Manual.
WARNING: All packing materials such as tape, plastic sheets, wire ties
and tags are not part of this toy, and should be discarded
for your child’s safety.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover at the back
of the unit. Use a screwdriver to
loosen the screw.
3. Install 2 new ‘AA’ (UM3/LR6)
batteries following the diagram
inside the battery box.
4. Replace the battery cover and
tighten the screw to secure.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be
used for an extended period of time.
Getting Started

4
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are
to be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
PRODUCT FEATURES
1. ON/OFF/VOLUME CONTROL SWITCH
To turn the unit ON, slide the ON/
OFF/VOLUME CONTROL SWITCH
to the LOW VOLUME ( ) or HIGH
VOLUME ( ) position. To turn the
unit OFF, slide the ON/OFF/VOLUME
CONTROL SWITCH to the OFF ( )
position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Pop-Up Honey Pot will automatically
power-down after approximately 30 seconds without input. The unit
can be turned on again by pressing any button.
Product Features

5
TO BEGIN PLAY
1. Slide the ON/OFF/VOLUME
CONTROL SWITCH to turn the unit
ON. You will hear a cute “peek-a-boo”
song followed by “Oh, I hear someone.
Is that you?” The light will flash with
the sounds.
2. Press the LIGHT-UP TIGGER BUTTON
to hear fun phrases, sounds, “ABC”
song or the “Hickory Dickory Dock”
melody. The light will flash with the
sounds.
3. Press the MUSIC BUTTON to hear
either the “peek-a-boo” or the “ABC”
song or a variety of cheerful melodies.
If a melody is playing and the Tigger
button is pressed, fun sounds will play
over the melody. The light will flash
with the sounds.
4. If there is no input to the unit after approximately 10 seconds, you will
hear a fun phrase. After another 10 seconds, if there is still no input,
you will hear either the “peek-a-boo” or the “ABC” song. If there
continues to be no input to the unit, you will hear “Good-bye!”, then
it will automatically power-down.
To Begin Play

6
MELODY LIST
1. Hickory Dickory Dock
2. The Wheels on the Bus
3. Pop! Goes the Weasel
4. Hey Diddle Diddle
5. Polly Put the Kettle On
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended period
of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service
representative will be happy to help you.
Troubleshooting

7
IMPORTANT NOTE:
Creating and developing electronic learning Winnie the Pooh products
is accompanied by a responsibility that we at VTech®take very seriously.
We make every effort to ensure the accuracy of the information, which
forms the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products and
encourage you to call our Consumer Services Department at 1-800-521-
2010 in the U.S. or 1-877-352-8697 in Canada with any problems
and/or suggestions that you might have. A service representative will
be happy to help you.
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Note

8
Caution: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ices-003.
Cet appareil numérique de la classe b est conforme à la norme nmb-
003 du Canada.
91-74303-000
Note