V-tech Old MacDonald's Puzzle Pals User manual

®

1
Dear Parent:
At VTECH®we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTECH®infant and toddler learning products
encourage your child’s natural growth and discovery skills. When
it comes to providing electronic learning products that enlighten,
entertain and develop minds, at VTECH®we see the potential in
every chizà.

2
INTRODUCTION
Thank you for purchasing the Old MacDonald’s Puzzle Pals™ learning
toy!Thisproduct isone ofa familyof high-qualityelectronic learningtoys.
We at VTECH®are committed to providing the best possible products to
entertain and educate your child. Should you have any questions or
concerns, please call our Consumer Services Department at 1-800-521-
2010 in the U.S. or 1-800-267-7377 in Canada.
TheOld MacDonald’s Puzzle Pals™ learningtoyis a fun and rewarding
game that teaches your child about familiar animals while developing
theirhand-eye coordination and logic skills. Yourchild and their barnyard
buddies will have hours of fun while learning through discovery!
ON/OFF/MODE
SELECTOR SWITCH
LIGHT-UP
NEST
CHICKEN
PUZZLE
PIECE
COW
PUZZLE
PIECE
LIGHT-UP
BUCKET
DUCK
PUZZLE
PIECE
LIGHT-UP
BEE LIGHT-UP
FLOWER
SPEAKER
COVER
SHEEP
PUZZLE
PIECE
PIG
PUZZLE
PIECE
LIGHT-UP
APPLE
O
l
d
M
a
c
D
o
n
a
l
d
’
s
P
u
z
z
l
e
P
a
l
s
®
™

3
INCLUDED IN THIS PACKAGE
- One VTECH®Old MacDonald’s Puzzle Pals™ learning toy.
- One instruction manual.
WARNING: All packing materials such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
HIGH/LOW VOLUME
SWITCH BATTERY
DOOR

4
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a screwdriver to loosen
thescrew.
3. Install 2 new “AA” (UM-3/LR6) batteries
following the diagram inside the battery
box.(The use of new alkaline batteries is
recommended for maximum perform-
ance.)
4. Replacethebattery cover andtightenthe
screw to secure the battery cover.

5
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: Ifforsome reason the program/activitystops working, then please
follow these steps:
1. Please turn the unit off.
2. Interrupt the power supply by removing the batteries.
3.Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit on. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.

6
TO BEGIN PLAY
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to either the MELODY MODE
()or TALKING MODE ( ) position
to turn the unit ON.
2. Toadjust thevolume, slide the VOLUME
CONTROL SWITCH locatedontheback
of the unit to ( ) for LOW VOLUME or
() for HIGH VOLUME.
3. Slide the ON/OFF/MODE SELECTOR
SWITCH to the OFF ( ) position to turn
theunitOFF.
AUTOMATIC SHUT-OFF
To preserve battery life, the Old MacDonald’s Puzzle Pals™ learning
toy will turn off automatically after a few minutes without input. The unit
can be turned on again by pressing any button.

7
ACTIVITIES
A. Talking Mode
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the TALKING MODE( )
position. You will hear “Let’s play!”
followed by a short tune and the lights
will flash.
2. Put the CHICKEN PUZZLE PIECE into
theCHICKEN SLOT.Youwillhear “Old
MacDonald had a chicken” followed by
a “Cluck Cluck” sound and a part of the
melody “ Old MacDonald Had A Farm” .
The lights will flash with the sounds.
3. Put the COW PUZZLE PIECE into the
COW SLOT. You will hear “Old
MacDonald had a cow” followed by a
“Moo Moo” sound effect and a part of
the melody “ Old MacDonald Had A
Farm” . The lights will flash with the
melody.
VTECH
Printed in China
91-01454-000
“Old MacDonald
had a cow.
Moo Moo”
“Let’s play!”
“Old MacDonald
had a chicken.
Cluck Cluck”

8
4. Put the SHEEP PUZZLE PIECE into
the SHEEP SLOT. You will hear “Old
MacDonaldhad a sheep” followed by a
“Baa Baa” sound effect and a part of
the melody “ Old MacDonald Had A
Farm” . The lights will flash with the
melody.
5. Putthe DUCK PUZZLE PIECE into the
DUCK SLOT. You will hear “Old
MacDonald had a duck” followed by a
“QuackQuack” sound effect andapart
of the melody “ Old MacDonald Had A
Farm” . The lights will flash with the
melody.
6. Put the PIG PUZZLE PIECE into the
PIG SLOT. You will hear “Old
MacDonald had a pig” followed by an
“Oink Oink” sound effect and a part of
the Melody “ Old MacDonald Had A
Farm” . The lights will flash with the
melody.
“Old MacDonald
had a duck.
Quack Quack”
“Old MacDonald
had a pig.
Oink Oink”
“Old MacDonald
had a sheep.
Baa Baa”

9
7. Ifthe puzzle pieces areinserted into their
respective slots in sequential order, the
entire melody "Old MacDonald Had A
Farm" will play with different animal
sound effects after all of the pieces have
been placed in their respective slots.
8. If there is no input to the unit for 10
seconds, you will hear “Let’s play”
followed by a short tune. The lights will
flash with the melody.
9. If there is no input for 20 seconds, you
will hear “Old MacDonald had a...”
followed by a random animal sound
effect. The lights will flash with the
sounds.
B. Melody Mode
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the MELODY MODE ( )
position to hear a short tune. The lights
will flash with the melody.
“Let’s play!”
“Old MacDonald
had a sheep.
Baa Baa”