V-tech Switch & Go Dinos - Tonn the Stegosaurus User manual

© 2012 VTech
Printed in China
User’s Manual
91-002678-004 US
TM
TONN THE STEGOSAURUS
TONN THE STEGOSAURUS
TM

Hi Friend,
You’re about to embark on a “dino-mite” adventure with
me, Tonn the Stegosaurus™! Just so you know, I’ve been
specially created just for you and am part of the VTech®
Switch & Go Dinos™ crew! Switch & Go Dinos™ are a
special breed of dinosaurs that transform from vehicle
to dino in a few easy steps. You’re going to love playing
with me!
Not only can you help me do some wicked transformations,
but you can help me do other cool things, too! Customize
me by choosing my eyes in dino mode or picking a driver
when I’m in vehicle mode! Try pushing me on the ground
or pressing a button and you’ll hear me make awesome
sounds! Press another button to hear me talk, and I’ll tell
you all about my wild life as a dinosaur! Maybe you’ll even
learn a thing or two.
For more fun, be sure to check out the rest of the Switch &
Go Dinos™ crew (each sold separately)! And remember,
with me you’re in for some dino switchin’, road racing fun!
Your pal,
Tonn the Stegosaurus™

2
INTRODUCTION
Hey, dude! They call me Tonn the StegosaurusTM because I’m
tons of fun! My body is covered in beautiful, triangle-shaped plates
so I’m always rockin’ the latest in prehistoric fashion.
And when I’m not rockin’, I’m rollin’! I can also turn into a super-cool
car. I drive in style! Let’s roll!
Introduction
LCD
Screen
Sound Button
Style
Button
Talk Button
Volume
Button

3
INCLUDED IN THIS PACKAGE
• OneVTech®SWITCH & GO DINOSTM:Tonn the StegosaurusTM
• Oneuser’smanual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep the user’s manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit. Use a screwdriver
to loosen the screw.
3. Install 2 new “AAA” (LR03/AM-4)
batteries into the main unit following
the diagram inside the battery box.
(The use of new, alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure.
Getting Started

4
Product Features
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Removerechargeable batteries fromthe toy beforecharging (if
removable).
• Rechargeablebatteriesareonlytobechargedunder adult
supervision.
PRODUCT FEATURES
1. TURNING THE UNIT ON
Slide the ON/OFF Switch to ON to turn
the unit ON.
2. STYLE BUTTON
Press the Style Button to choose a driver
or change the dino eyes.

5
3. TALK BUTTON
Press the Talk Button to hear the dino
or driver talk.
4. SOUND BUTTON
Press the Sound Button to hear cool
sound effects.
5. VOLUME BUTTON
Press the Volume Button to adjust the
volume.
6. TURNING THE UNIT OFF/ AUTOMATIC SHUT-OFF
Slide the ON/OFF Switch to OFF to turn the unit OFF. To preserve
battery life, the unit will automatically power-off after several minutes
without input.
Product Features
2. Move the front plates in and
the jaw up.
1. Dinosaur shape.
HOW TO SWITCH THE DINO TO A CAR

6
How to Switch
3. Flip the plates down on
each side. 4. Flip the tail up.
5. Lift the back slightly and turn
the back legs down until the
wheels are upside down.
6. Rotate the back legs forward
to the front.
7. Continue moving the legs
forward until they meet the
jaw and form the front end
of the car.
8. Car shape.

7
Care & Maintenance / Troubleshooting
Note:
To change the car back into a dino, reverse the order of the steps above.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.

8
Note
NOTE:
Thisequipment generates anduses radio frequencyenergy and if
not installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply
within the limits for a Class B computing device in accordance with the
specicationsinSub-partJofPart15FCCrules,whicharedesigned
to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference
willnotoccurinaparticularinstallation.Ifthisequipmentdoescause
interference with radio or television reception, which can be determined
byturningtheequipmentonandoff,theuserisencouragedtotryto
correct the interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna
• Increasetheseparationbetweentheequipmentandreceiver
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp
Caution:changesormodicationsnotexpresslyapprovedbytheparty
responsible for compliance could void the user’s authority to operate
theequipment.
THISDEVICE COMPLIES WITH PART15 OF THE FCC
RULES.OPERATIONISSUBJECTTOTHEFOLLOWINGTWO
CONDITIONS:(1)THISDEVICEMAYNOTCAUSEHARMFUL
INTERFERENCE,AND(2)THISDEVICEMUSTACCEPTANY
INTERFERENCERECEIVED,INCLUDINGINTERFERENCE
THATMAYCAUSEUNDESIREDOPERATION.
THISCLASS B DIGITALAPPARATUS COMPLIESWITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORMEÀLANORMENMB-003DUCANADA.