V-tech Toot-Toot Cory Carson SmartPoint Vehicle Assembly Instructions

Toot-Toot Cory Carson®SmartPoint™ Vehicle
Parent’s Guide
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover. Then, use a
screwdriver to loosen the screw and remove
the cover.
3. Remove old batteries by pulling up on one
end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance).
5. Replace the battery cover and tighten the screw to secure.
WARNING: All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are
not part of this toy and should be discarded for your child’s
safety.
NOTE: Please keep this parent’s guide as it contains important
information.
Rotate the packaging lock anticlockwise
several times.
Pull out the packaging lock and discard.
Removing the packaging locks
BATTERY NOTICE
• UsenewalkalinebatteriesorfullychargedNI-MH(NickelMetal-hydride)
rechargeable batteries for best performance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-zinc)or
rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging(ifremovable).
• Rechargeablebatteriesareonlytobechargedunderadultsupervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on
their respective packaging, indicates they must not be disposed of in
domestic waste as they contain substances that can be damaging to
the environment and human health.
ThechemicalsymbolsHg,CdorPb,wheremarked,indicatethat
thebatterycontainsmorethanthespecifiedvalueofmercury(Hg),
cadmium(Cd)orlead(Pb)setoutinBatteryDirective(2006/66/EC).
The solid bar indicates that the product was placed on the market after
13th August, 2005.
Helpprotecttheenvironmentbydisposingofyourproductorbatteries
responsibly.
Formoreinformation,pleasevisit:
www.recycle-more.co.uk
www.recyclenow.com
PRODUCT FEATURES
1. On/Off Switch
To turn the unit On, slide the On/Off Switch to
the On position. To turn the unit Off, slide
the On/Off Switch to the Off position.
2. Automatic Shut-Off
To preserve battery life, the Toot-Toot Cory Carson® character will
automaticallypowerdownafterapproximately60secondswithoutinput.The
unit can be turned on again by pressing the Light Up Button, Action Button
orbypushingthecharacterquickly.
NOTE: This product is in try-me mode in the packaging. After opening the
package, turn the vehicle off and on again to proceed with normal play. If the unit
powers down while playing, we suggest changing the batteries.
ACTIVITIES
1. Light Up Button
Press the Light Up Button to hear sounds,
songs, phrases and melodies. The light will
flash with the sounds.
12
91-003791-008 UK

2. Action Button
Press the Action Button to activate lights or a
mechanical function on the character and hear
fun sounds. The light will flash with the sounds.
3. Sounds and Melodies
Push the character to hear fun sounds. If a
melody is already playing, push the character
to add fun sounds on top of the melody. The
light will flash with the sounds.
4. SmartPoint™Locations
For added fun, the character interacts with
the SmartPoint™location on Toot-Toot Cory
Carson®play sets. Simply roll the character
over the SmartPoint™location to see the light
flash and to hear fun sounds, short tunes or
sing-along songs. (Play sets sold separately).
CARE & MAINTENANCE
1. Keeptheunitcleanbywipingitwithaslightlydampcloth.
2. Keeptheunitoutofdirectsunlightandawayfromanydirectheatsource.
3. Remove the batteries when the unit is not in use for an extended period of time.
4. Donotdroptheunitonhardsurfacesanddonotexposetheunittomoistureor
water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these
steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play with again.
5. If the product still does not work, install a new set of batteries.
Iftheproblempersists,pleasecontactourConsumerServicesDepartmentanda
service representative will be happy to help you.
34
CONSUMER SERVICES
CreatinganddevelopingVTech®products is accompanied by a responsibility
that we at VTech®take very seriously. We make every effort to ensure
the accuracy of the information, which forms the value of our products.
However,errorssometimescanoccur.Itisimportantforyoutoknowthat
westandbehindourproductsandencourageyoutocallourConsumer
ServicesDepartmentwithanyproblemsand/orsuggestionsthatyoumight
have. A service representative will be happy to help you.
UKCustomers:
Phone:03306780149(fromUK)or+443306780149(outsideUK)
Website:www.vtech.co.uk/support
AustralianCustomers:
Phone:1800862155
Website:support.vtech.com.au
NZCustomers:
Phone:0800400785
Website:support.vtech.com.au
Product Warranty /Consumer Guarantees
UKCustomers:
Read our complete warranty policy online at vtech.co.uk/warranty.
AustralianCustomers:
VTECHELECTRONICS(AUSTRALIA)PTYLIMITED–CONSUMER
GUARANTEES
UndertheAustralianConsumerLaw,anumberofconsumerguarantees
applytogoodsandservicessuppliedbyVTechElectronics(Australia)Pty
Limited. Please refer to vtech.com.au/consumerguarantees for further
information.
91-003791-008 UK
TM & © 2020 VTech Holdings Limited.
All rights reserved.
Printed in China.