V-tech Toot-Toot Drivers Airport Assembly Instructions

Parent’s Guide
91-003545-000 US
Airport

2
2
2
2
INTRODUCTION
Thank you for purchasing the Toot-Toot Drivers®Airport by VTech®!
Watch the adventurous Aeroplane come to life when you fly him
around the course and over the five SmartPoint®locations. Launch the
Aeroplane into the cloud, spin around the tower, or slide the luggage
up and down. Children will have a blast while strengthening motor skills
and engaging in imaginative play.
LauncherCloud Platform
SmartPoint®
Aeroplane
6 SmartPoint®
Locations

3
3
3
3
INCLUDED IN THIS PACKAGE
One ramp support
One ramp track sign
One airport base One fuel nozzle One ramp track
One cloud platform One launcher base One launcher handle
One airport
building
One launcher
platform
One launcher ring
One SmartPoint®
Aeroplane

4
4
4
4
Wind meter A & B
Four ¼ straight tracks
Two 90 Degree track
convex
One track half circle
One ¼ straight track,
female
Two cross tracks
One spot track
One label sheet
One airport tower
One wind meter track
- One parent’s guide
One 60° track, male

5
5
5
5
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE: Please keep user’s manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
Aeroplane
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the Aeroplane. Use a coin or screwdriver to
loosen the screw.
3. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
Unlock the packaging locks:
Turn the packaging lock anticlockwise
several times.
Pull out and discard the packaging lock.

6
6
6
6
BATTERY NOTICE
• UsenewalkalinebatteriesorfullychargedNI-MH(NickelMetal-
hydride) rechargeable batteries for best performance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc)orrechargeable(Ni-Cd,Ni-MH),ornewandusedbatteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
ThechemicalsymbolsHg,CdorPb,wheremarked,
indicate that the battery contains more than the specified
valueofmercury(Hg),cadmium(Cd)orlead(Pb)setout
in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Helpprotecttheenvironmentbydisposingofyourproduct
or batteries responsibly.
Formoreinformation,pleasevisit:
www.recycle-more.co.uk
www.recyclenow.com

7
7
7
7
Please stick the labels to the play set
securely as indicated on the following pages
below:
1
2
43 5
7
89
6

8
8
8
8
1
4
2 5
7
36
99
8

9
9
9
9
ASSEMBLY INSTRUCTIONS
Airport
With the VTech®Toot-Toot Drivers®Airport , safety comes first.
Toensureyourchild’ssafety,adultassemblyisrequired.
1. Insert the Airport Tower into the Cloud Platform, as shown below.
2. Insert the Airport Tower into the Airport Building. Then, attach
the Airport Building and Fuel Nozzle to the Airport Base, as
shown below.
3. Connect the Ramp Track Sign to the Ramp Track, as shown
below.

10
10
10
10
4. Attach the Ramp Support to the Airport Base.Then, connect the
Ramp Track to the Ramp Track Support, as shown below.
5. Attach the Launcher Ring to the Launcher Platform. Then,
connect the Launcher Platform and Launcher Handle to the
Launcher Base. Lastly, connect the Launcher Base to the Airport
Base, as shown below.