V-tech Toot-Toot Drivers Super City User manual

User’s Manual
© 2015 VTech
Printed in China
91-003117-002 UK
Toot-Toot Drivers Super City

SPINNING
DISC
SMARTPOINT®
POLICE CAR
18 SMARTPOINT®
LOCATIONS
51 TRACK
PIECES
JAIL
LITTLE FIRE
ENGINE
POLICE
STATION
ALARM
LAUNCHER
FIRE
STATION
FIRE
ALARM
BIG FIRE
ENGINE
2
INTRODUCTION
Thank you for purchasing the VTech®Toot-Toot Drivers Super City
learning toy!
Hurry to the emergency with Toot-Toot Drivers Super City play
set! Featuring a fire station, police station and a variety of tracks and
accessories this play set is perfect for creating an entire city!
INTRODUCTION

3
INCLUDED IN THIS PACKAGE
- One user’s manual
- One sheet of labels
INCLUDED IN THIS PACKAGE
One traffic cone
One large
lift bracket
One police
station building
One traffic light
One
spinning disc
One roadblock
One patrol booth
One small track
One big
curved track
One small
lift bracket
One SmartPoint®
police station lift
One SmartPoint®
exit track
One track support
One SmartPoint®
patrol booth
track piece
One gate
One SmartPoint®
police car

4
INCLUDED IN THIS PACKAGE
One big fire
engine
One non-electronic
fire engine
One fire
station
building
One fire
station base
One
SmartPoint®
fire station lift
One curved
ramp piece
One fire hydrant One straight
ramp piece
One spinner One gate
archway
SmartPoint®
spinning gate track
One SmartPoint®
car wash
One SmartPoint®
toll booth
Two play
pieces
Two SmartPoint®
gate tracks

5
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
NOTE:
Please keep this user’s manual as it contains important
information.
INCLUDED IN THIS PACKAGE
Ten 3/4
straight tracks
Two
tunnels
Two SmartPoint®
tunnel tracks
One end track
One 1/4 straight
track, male
Thirteen 1/4
straight tracks
Four 90-degree
tracks, male
Two 90-degree
tracks, female
One 1/4 straight
track, female
Eight cross tracks Two 60-degree
tracks, female
One 60-degree
track, male

6
GETTING STARTED
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the police car. Use a screwdriver to
loosen the screw.
3. Install 2 new ‘AAA’ (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.

7
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specified value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery
Directive(2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product
or batteries responsibly.
Formoreinformation,pleasevisit:
www.recycle-more.co.uk
www.recyclenow.com

8
LABEL INSTRUCTIONS
Please stick the labels to the play set securely as
indicted below:

9
LABEL INISTRUCTIONS

10
ASSEMBLY INSTRUCTIONS
With the VTech®Toot-Toot Drivers Super City, safety comes first.
Toensureyourchild’ssafety,adultassemblyisrequired.
To assemble your Toot-Toot Drivers Super City play set, please
followtheinstructionsbelow:
1. Assemble the police station: First slide the lift into the groove on
the side of the police station building, then attach the large lift bracket
behind the lift and the small lift bracket in front. Finally, attach the
two brackets to the small track piece to secure.
2. Assemble the patrol booth:
Attach the patrol booth track to the small track piece on the police
station. Then, insert the patrol booth piece onto the notch on the
side of the track.
3. Assemble the curved track: Attach the track support to the big
curved track. Then, attach the curved track to the police station as
shown below. Insert the gate into the big curved track.
ASSEMBLY INSTRUCTIONS

11
4. Assemble the spinning disc: Put the traffic light into the hole at
the centre of the spinning disc and attach the disc to the bottom of
the big curved track. Attach the exit track to the spinning disc.
POLICE CAR FEATURES
1. ON/OFF SWITCH
ASSEMBLY INSTRUCTIONS
5. Assemble the spinning gate: Locate the
spinner and insert it into the gate archway
as shown. Place the fully assembled spinning
gate onto the spinning gate track piece.
6. Assemble the fire station: Slide the lift onto the groove on the
side of the fire station building.Then, attach the fire station building
to the station base as shown.

12
ASSEMBLY INSTRUCTIONS
7. Attach the fire hydrant: Attach the fire
hydrant to the fire station base as shown.
You will hear a “click” sound when it locks
into place.
8. Assemble the ramp: Connect the curved and straight ramp pieces
together. Attach the curved ramp piece to the top of the fire station.
9. Assemble the tunnels: Attach the
tunnel to the SmartPoint®tunnel track.
You will hear a “click” sound to indicate
the track is secure.

13
ASSEMBLY INSTRUCTIONS
Once you’ve completed the above steps, you are ready to play! You
can connect these pieces to the other included track pieces in a
variety of ways.

14
POLICE CAR ACTIVITIES
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF
SWITCH on the police car to the ON
( ) position. To turn the unit OFF,
slide the ON/OFF SWITCH to the OFF
( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Police Car will automatically
power-down after approximately 60 seconds without input. The
unit can only be turned on again by pressing the light-up button or
pushingthepolicecarquickly.
POLICE CAR ACTIVITIES
1. Slide the ON/OFF SWITCH to turn the
unit ON.You will hear police car sounds,
a song and a phrase.The light will flash
with the sounds.
2. Press the LIGHT-UP BUTTON to hear
police car songs and phrases.The light
will flash with the sounds.
PRODUCT FEATURES/ACTIVITIES

15
ACTIVITIES
3. Push the police car to hear fun sounds
and melodies. While the melody is
playing, push the police car again to
add in fun sounds on top of the melody.
The light will flash with the sounds.
4. For added fun, the police car interacts
with other play sets. Simply roll the
police car over one of the play set’s
SmartPoint®locations to see the police
car’s light flash and to hear greetings,
fun sounds, short tunes and sing-
along songs (additional play sets sold
separately).
SUPER CITY ACTIVITIES
1. Drivethepolicecarovertheeighteen
different SmartPoint®locations to
trigger fun sounds, phrases and sing-
along songs.
2. Move the car up to the top of the
police station or fire station with the
LIFT.

16
3. From the top of the police station,
press the ALARM LAUNCHER to
launch the police car down the big
curved track.
4. Slide the bar on the side of the
SPINNING DISC to quickly move
the police car in a fast-paced chase!
5. Open the JAIL gate to put the
pretend criminal behind bars!
6. Move the police car through the
spinning gate to watch it twirl.
ACTIVITIES
7. Slide the FIRE ALARM lever to hear a
mechanical alarm sound.

17
ACTIVITIES
8. Launch the SmartPoint®police car
down the FIRE STATION ramp and
pretend to race to an emergency!
9. Load your SmartPoint®police car onto
the BIG FIRE ENGINE to help it get
around. Use the ladder to lift up the
SmartPoint®police car.
10. Press the BIG FIRE ENGINE’S button
to hear beeping sounds.
11. Move the fire hose and fire extinguisher
on the big fire engine.

18
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Donotdroptheunitonhardsurfacesanddonotexposetheunit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow
thesesteps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
Iftheproblempersists,pleasecallourConsumerServicesDepartment
on 01235 546810 (from UK) or [phone] (outside UK) and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech products is accompanied by a
responsibility that we at take very seriously. We make every effort
to ensure the accuracy of the information, which forms the value of
our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage
youtocallourConsumerServicesDepartmenton01235546810
(from UK) or [phone] (outside UK), with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.
TROUBLESHOOTING

19
OTHER INFORMATION
WARNING:
Adult assembly required.