Vantron VT-M2M-BTA-DE User manual

All Rights Reserved
VT-M2M-BTA-DE
User’s Manual
Vantron Technology
www.vantrontech.com

VT-M2M-BTA-DE
Revision History:
No.
Version
Description
Date
1
V1.0
First release
June
.1
7
, 201
4
2
V1.1
Modify description of COM
June
.
23, 2014
3
V1.2
Add
software part
D
ecember 18, 2014
4 V1.3
1.
Update the
safety
Instructions
2. Add antenna description Feb 11,2015

VT-M2M-BTA-DE
Table of Contents
Part I：Hardware Platform .................................................................... 4
1 Foreword........................................................................................ 5
1.1 Copyright Notice ................................................................... 5
1.2 Notes .................................................................................... 6
1.3 Statement ............................................................................. 6
1.4 Disclaimer............................................................................. 6
1.5 Limitation of Liability/Non-warranty...................................... 6
1.6 Safety Instructions ................................................................ 6
1.7 Precautions........................................................................... 7
1.8 Safety Instructions for Power Cables and Accessories ............ 8
1.9 Cleaning Instructions ............................................................ 8
2 Overview ........................................................................................ 9
2.1 Introduction ......................................................................... 9
2.2 Product Series..................................................................... 10
2.2.1 Product Order Coding Rule .................................... 10
2.2.2 Ordering Information ............................................ 11
3 M2M-BTA Hardware Instructions ................................................. 12
3.1 Product Appearance ........................................................... 12
3.2 Specifications...................................................................... 15
3.3 Interface Instructions .......................................................... 17
3.3.1 Front View ............................................................ 17
3.3.2 Back View ............................................................. 18
3.4 Dimension .......................................................................... 19
3.5 Interface Description .......................................................... 20
3.5.1 Wide-Range Power Interface ................................. 20

VT-M2M-BTA-DE
3.5.2 Ethernet Interface ................................................. 20
3.5.3 D Sub-9 RS232 Connector...................................... 21
3.5.4 RS232/485 ,CAN,External IO Connector ................. 22
3.5.5 VGA Interface........................................................ 23
3.5.6 USB Host Connector .............................................. 23
3.6 Operation Notice ................................................................ 25
3.6.1 Change SIM Card ................................................... 25
3.6.2 Power Supply ........................................................ 25
4 Tips .............................................................................................. 26
Part II：Software Reference ................................................................ 29
1. Introduction .................................................................................. 30
1.1 About This Manual ............................................................... 30
1.2 Windows OS Support ........................................................... 30
1.3 VT-M2M-BTA-DE Features .................................................... 31
2. Base Control ..................................................................................... 35
2.1 CAN Control ......................................................................... 35
2.2 GPIO Control ........................................................................ 37
2.3 Serial COM Control ............................................................... 37
2.4 Audio and Video Control ...................................................... 39
2.5 SD card Control .................................................................... 41
2.6 ADXL345 Control .................................................................. 41
3. Network Module .............................................................................. 43
3.1 WIFI Control ......................................................................... 43
3.2 3G Control ........................................................................... 44
4. GPS Module...................................................................................... 46
5. ZigBee Control .................................................................................. 48

VT-M2M-BTA-DE

VT-M2M-BTA-DE
Part I：Hardware Platform

VT-M2M-BTA-DE
1 Foreword
1.1 Copyright Notice
While all information contained herein have been carefully checked
to assure its accuracy in technical details and printing, Vantron assumes
no responsibility resulting from any error or features of this manual, or
from improper uses of this manual or the software. Please contact our
technical department for relevant operation solutions if there is any
problem that cannot be solved according to this manual.
Vantron reserves all rights of this manual, including the right to
change the content, form, product features, and specifications
contained herein at any time without prior notice. The latest version of
this manual is at www.vantrontech.com.cn. Please contact Vantron for
further information:
Vantron Technology（Vantron）
E-mail: [e-mail]
The trademarks and registered trademarks in this manual are properties
of their respective owners. No part of this manual may be copied,
reproduced, translated or sold. No changes or other purposes are
permitted without the prior written consent of Vantron.
Vantron reserves the right of all publicly-released copies of this
manual.

VT-M2M-BTA-DE
1.2 Notes
Applicable notes are listed in the following table:
Sign
Notice Type
Description
Notice Important information and regulations
Caution Caution for latent damage to system or harm
to personnel
1.3 Statement
It is recommended to read and comply with this manual before
operating VT-M2M-BTA which provides important guidance and helps
decreasing the danger of injury, electric shock, fire, or any damage to
the device.
1.4 Disclaimer
Vantron assumes no legal liability of accidents resulting from failure of
conforming to the safety instructions.
1.5 Limitation of Liability/Non-warranty
For direct or indirect damage to this device or other devices of
Vantron caused by failure of conforming to this manual or the safety
instructions on device label, Vantron assumes neither warranty nor legal
liability even if the device is still under warranty.
1.6 Safety Instructions
 Keep and comply with all operation instructions, warnings, and

VT-M2M-BTA-DE
information.
 Pay attention to warnings on this device.
 Read the following precautions so as to decrease the danger of
injury, electric shock, fire, or any damage to the device.
 Operations and Service instructions are provided with the
equipment.
 Unit shall be used with indoor-use antenna only. No antenna for this
unit can be installed outdoor.
 The maximum operation temperature is 61°C.
1.7 Precautions
 Pay attention to the product labels/safety instructions printed on
silk screens.
 Do not try repairing this product unless declared in this manual.
 Keep away from heat source, such as heater, heat dissipater, or
engine casing.
 Do not insert other items into the slot (if any) of this device.
• Keep the ventilation slot ventilated for cooling.
•System fault may arise if other items are inserted into this device.
 Installation: ensure correct installation according to instructions
from the manufacturer with recommended installation tools.
 Ensure ventilation and smoothness according to relevant ventilation
standard.

VT-M2M-BTA-DE
1.8 Safety Instructions for Power Cables and Accessories
Proper power source only Start only with power source that
satisfies voltage label and the voltage necessary according to this
manual. Please contact technical support personnel of Vantron for any
uncertainty about the requirements of necessary power source.
Use tested power source This product still contains a button
lithium battery as a real-time clock after its external power source is
removed and therefore should not be short-circuited during
transportation or placed under high temperature.
Place cables properly: Do not place cables at any place with
extrusion danger.
1.9 Cleaning Instructions
 Please power off before cleaning the device.
 Do not use spray detergent.
 Clean with a damp cloth.
 Do not try cleaning exposed electronic components unless with a
dust collector.
 Support for special fault: Power off and contact technical support
personnel of Vantron in case of the following faults:
 The device is damaged.
 The temperature is excessively high.
 Fault is still not solved after the operation according to the
manual.

VT-M2M-BTA-DE
2 Overview
2.1 Introduction
Thank you for choosing Vantron. It is our commitment to provide our
valued customers with the embedded devices equipped with the
state-of-the-art technology and the best product services.
Vantron’s M2M products are based on the most advanced ARM and
Intel Atom processors and have low-power consumption and high
integration. The products are designed for applications of M2M in
industrials, medicals, financial, retail, vehicle, and transportations etc.

VT-M2M-BTA-DE
2.2 Product Series
2.2.1 Product Order Coding Rule
Order Code
VT-M2M-BTA-DE-S-1GM-16GF-GWZP-V
Version:
I: Extended Temperature
Blank:Commercial temperature
Wireless Module Option:
2G: 2G, 3G: 3G, W: WiFi, Z: Zigbee, P: GPS
SD Memory Size: 16G: 16GB
DDR Memory Size:
1G:
1G
B
, 2G: 2GB
CPU Speed: S/D/Q:Single / Dual/ Quad

VT-M2M-BTA-DE
2.2.2 Ordering Information
Order Examples:
VT-M2M-BTA-DE-S-1GM-16GF-G
WP-I
ATOM Baytrail single Processor, 1GB DDR3L, 16GB SSD, 3G, WiFi,
GPS, extended temperature
VT-M2M-BTA-DE-Q-1GM-16GF-W
P
ATOM Baytrail quad Processor, 1GB DDR3L, 16G SSD, WiFi, GPS,
commercial temperature
Accessories:
Install Mechanical tools,1pc
Power Adapter with locked connector (Optional),1pc
IO Terminal (12x3.81mm) (Optional),1pc
3G Antenna(Optional),1pc
WiFi Antenna(Optional),1pc
Zigbee Antenna(Optional),1pc
GPS Antenna(Optional),1pc

VT-M2M-BTA-DE
3 M2M-BTA Hardware Instructions
3.1 Product Appearance
Front Side View
Back Side View

VT-M2M-BTA-DE
View for all optional embedded modules and antennas

VT-M2M-BTA-DE
Bottom View for optional embedded modules
(1xHalf PCIe slot under the 1xPCIe slot)
Top View for thermal module

VT-M2M-BTA-DE
3.2 Specifications
Specifications
CPU Processor Intel® ATOM™, E3827/1.75GHz, E3845/1.91GHz,
E3815/1.46GHz
Memory On Board
RAM
On Board DDRIII 1333MT/s(E3845&E3827)/ 1066MT/s
(E3815), up to 2GB
ROM Internal
1.8”SATA SSD Module Internal (16GB, or others)
On board SATA2.0 SSD 8GB(OPTIONAL)
Display Chipset Support LVDS/HDMI/VGA, simultaneous/dual view
display
Resolution Up to 1280 x 768 @ 60Hz for LVDS;
Up to 1920x1200@60Hz for HDMI
Up to
2560x1600@60
Hz for VGA
Interface 1xVGA (DB15)
1xLVDS (Optional Internal)
Wireless
Communication
WLAN Optional 802.11 b/g/n Wireless Module, external
antenna , Support 1x Half PCIe Wireless card
3G Module Optional1x mini PCIe 3G Broad Band Module with SIM
slot
ZigBee Optional low power Zigbee Module, external antenna
GPS Optional GPS module, external antenna
Peripheral
Interfaces
Ethernet 1x10/100/1000-BaseT(RJ45)
USB 2xUSB2.0 Host (Type A)
Audio HD Audio, 1xMIC in 3.5mm, 1xline Out
3
.
5
mm
（
optional
）
COM Port 1xRS232/485/422(DB9 full function),
1xRS232/485(2 wires on Green Terminal)

VT-M2M-BTA-DE
Alarm Buzzer Out
SD card 1xSD card Slot (Optional )
RTC Supported
Control Reset Button in the front,Power button in the back
GPIO Reserved GPIO (Terminal)
CAN 1x CAN2.0b
Security security On board Registration Serial Number, and SHA-1
Encrypt/Decrypt Chip DS28E01 (Optional)
TPM on board
Software OS Windows, or Linux
Applications SDK Available
Power Input DC9-36V(default 12V), Locked Power Jack
Consumption
6W (Pulse8W), Sleep 2W. (without
3G,GPS,Zigbee,WLAN)
Mechanical Dimensions 176x101x52mm (Box)
Install 198x101x52mm
Weight 0.6Kg (1.2KKg package Kit)
Enclosure Aluminum Alloy with Black Color
Environment
Condition
Temperature Operating:-0°C ~ +65°C
( ETR:-40°C ~ +65°C Optional)
Storage: -20°C ~ +70°C,
(ETR:-40°C ~ +85°C Optional)
Humidity 5-95%RH at 25-35 (Non-Condensation)
Cooling Mode
Fan less, Heat Sink
Approvals UL, FCC Class B, and CE

VT-M2M-BTA-DE
3.3 Interface Instructions
3.3.1 Front View
3G / GPRS Antenna(3G Band) Antenna Gain:1dBi
WLAN / ZigBee Antenna(2.4G Band) Antenna Gain:3.2dBi
GPS Antenna(1.5G Band)

VT-M2M-BTA-DE
3.3.2 Back View