Vatech EzCam User manual

2
4
6
7
9
10
1. Introduction
2. Safety Information
3. Installation
4. Operation
5. Maintenance
6. Specification
CONTENTS
TABLE OF CONTENTS
01
PAGE

The EzCam is the latest hand-held Intraoral Camera from Vatech.
The advanced ergonomics of the handpiece design are comfortable
and easy to use. The camera's integrated capture button makes image
acquisition simple.
1.1 Overview
1. Introduction
— 5M CMOS image sensor
— 2 LEDs for illumination
— Autofocus
— Capture buttons are on the handpiece
— Direct connection to computer via standard USB cable
— No separate power supply required
The EzCam has the following features:
1. Introduction
02
PAGE

Note
Please read the entire contents of this manual before operating your EzCam
Intra oral camera. Please keep this manual in a safe place for future reference.
— Handpiece
— USB 2.0 Cable: 3m (Option: 5m)
— Disposable Sheathes
— Handpiece Holder
— User Manual
1.2 System Parts
1.3 System Requirements
— OS: Windows Vista / Windows 7,8,10
— CPU: Pentium(R) Dual-core 2Ghz or above
— RAM: 1GB
— Communication Port: USB 2.0
1. Introduction
03
PAGE

The EzCam is designed in conformity with ISO, EMC & CE standards.
To prevent damage to equipment and minimize the risks to patients, users,
and third parties getting injured, please follow the safety notes and operate
with care. Liability cannot be accepted for damage resulting from misuse
or failure to operate in compliance with the safety notes.
2. Safety Information
2. Safety Information
2.1 Safety & Storage Information
— Conformed Safety Standard
- Safety: IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007)
+AM1(2012)or IEC60601-1:2012
- EMC: EN 60601-1-2 : 2007
- Temperature: 10~ 55 ℃ (50~131℉)
- Relative Humidity: 10~ 90%
- Ambient pressure: 700~ 1060 hPa
— Transportation and Storage Conditions
04
PAGE

— Medical Devices Directive (93/42/EEC): Class I
— Type of protection against electric shock: Class II Equipment
— Degree of protection against electric shock: B Type
— Degree of protection against the ingress of water: IPXO
— Equipment not suitable for use in the presence of a flammable anesthetic mixture
with air or with oxygen or nitrous oxide.
Do not expose your camera to liquids or store in a damp place (it is not waterproof).—
Do not drop the handpiece.—
Store the camera in a clean, dry and well ventilated place.—
Avoid physical impacts on the handpiece.—
Place the handpiece in the handpiece holder when not in use.—
Use disposable sheaths to avoid cross contamination and to maintain warranty coverage.—
— Operating Condition
- Temperature: 10~ 40 ℃(50~104 , Relative Humidity: 10~ 80%, Ambient Pressure: 700~ 1060 hPa℉)
— 114 8Camera may reach a maximum temperature of 46ºC ( . ℉) if operated in an ambient
temperature of 40ºC( ℉).104
2.2 Precautions
2.3 Classification
2. Safety Information
05
PAGE

3. Installation
— The EzCam is not waterproof. Do not immerse in water or any form of liquid.
— Do not sterilize the handpiece by autoclave.
— Beware of electromagnetic radiation generated from other electrical appliances,
as they may cause the EzCam to malfunction.
— Do not operate with devices that do not comply with EN60601-1, EN60601-1-2
medical equipment standards.
Warning
3.1 Connect the supplied USB cable to the handpiece.
3.2 Connect the supplied USB cable to a USB 2.0 port on your PC.
— The EzCam does not require proprietary drivers. Once the camera is
connected to a PC that meets the system requirements, the camera will function.
3. Installation
06
PAGE

4. Operation
 Image capture button/ ‚User interface/ ƒUSB Plug /„Camera lens/
…Camera status indicator/ †Macro indicator/ p Macro button
4. Operation
7
07
PAGE

4. Operation
Open your dental imaging software's intraoral camera acquisition feature. —
The EzCam will automatically turn on and the Camera status indicator will turn green.
4.1 Camera On/Off
4.2 Focusing
When you close the intraoral camera image aquisition feature in your imaging software, —
the EzCam will automatically turn off and the Camera status indicator will change to blue.
The EzCam may be manually turned on/off by pressing and holding the power —
on/off button on the handpiece. The camera will automatically turn itself off after 10
minutes of inactivity.
4.3 Image capture
— Press the image capture button on the handpiece to store still images in your
imaging software.
When you turn on the camera - auto-focus mode. —
Press the macro button , zoom-in and fix the focus (Macro indicator will be turned on).—
Pressing the macro button again reverts to the auto-focus mode (Turn off macro indicator ).—
7
7
08
PAGE

— Please disconnect the camera from the USB port and detach the USB cable from the
handpiece before starting any cleaning procedures. Do not immerse the handpiece
in fluids. Do not spray any cleaning solutions directly on the handpiece.To clean the
handpiece housing, use a soft, clean, and lint-free cloth dampened with non-corrosive
disinfectant solution.
— Monthly test
- Inspect the USB cable and connector to prevent damage on the camera system.
5.2 Test
5.1 Handpiece Cleaning
5. Maintenance
5. Maintenance
— The PC workstation that connects to the EzCam via compatible USB cable is
an integral part of a Medical Electrical System. The PC must be a CE-approved
computer system conforming with the EN60601-1 or EN60950-1.
Warning
— No modification of this equipment is allowed.
09
PAGE

6. Warranty & Service
10
PAGE
— Sensor: CMOS/5MP
Resolution: 1280X720 —
Light Source: 2 White LEDs—
Focus Range: 9mm~35mm—
Angle of View: 62°—
Length of Cable: USB 2.0, 3m (Option: 5m)—
Dimension: 198 x 24 x 23mm (77.95x 9.45x 9 inch)—
Weight: 40g (0.088 lb)—
Rating: 5 VDC, 500mA—
Power Supply: No separate power supply required (through USB 2.0 port)—
6. Specification
6. Specification

11
PAGE
The device must be disposed of properly. Within the European Union,
the device must be disposed of in accordance with EU Directive 2012/19/EU(WEEE).
Disposal
Vatech France
Floor 4, 51 Quai de Dion Bouton
92800 Puteaux, France
DENTALL Co.,Ltd.
301-905 Bucheon Technopark, 345 Seokcheon-ro, Ojeong-gu,
Bucheon-si, Gyeonggi-do, 14501 KOREA
Tel: [phone] Fax: [phone]

SYMBOLS
SN
Direct current
Attention, consult
accompanying documents Manufacturer
Keep dry Manufacture date
CE mark
Serial NO. Type B applied part
See instruction for use
Disposed of correctly in
accordance with EU Directive
2012/19/EU(WEEE)
Humidity limitation
Temperature limit
Atmospheric Pressure
Limitation

EzCam-V1.0/ 20200916