Vatech PaX-Reve3D User manual

Installation manual 1
Contents
Chapter 1. Introduction .........................................................................6
1.1. System features...................................................................................................................6
1.2. General view of the PaX-Reve3D........................................................................................7
1.3. Exposure switch................................................................................................................... 9
Chapter 2. Preparing installation for the unit ......................................10
2.1. Responsibilities of the Manufacturer .................................................................................10
2.2. Parts list (supplied) ............................................................................................................10
2.3. Check Shock Watch and Tilt Watch...................................................................................12
Chapter 3. Installing the unit...............................................................13
3.1. Assembling the base and column......................................................................................13
3.2. Installing the Cephalometric unit........................................................................................ 22
3.3. Installing the touch pad screen ..........................................................................................25
3.4. Installing the accessory cabinet.........................................................................................26
3.5. Wiring each devise and finishing installation .....................................................................26
3.6. Balancing the equipment ...................................................................................................30
Chapter 4. Installing the control box ...................................................31
Chapter 5. Technical specifications ....................................................37
5.1. Unit technical specifications...............................................................................................37
5.1.1. General information........................................................................................................37
5.1.2. Electrical Characteristics................................................................................................38
5.1.3. Environmental Characteristics .......................................................................................38
5.1.4. Dimension of beam limiting device ................................................................................39
5.1.5. Dimension of the Unit.....................................................................................................40
5.1.6. Focal spot distance ........................................................................................................41
5.1.7. Standards .......................................................................................................................42
5.1.8. Marks & Graphic symbols ..............................................................................................42
5.2. X-Ray generator specifications..........................................................................................43
5.2.1. X-Ray Tube Specification ...............................................................................................43
5.2.2. High voltage generator...................................................................................................44
5.2.3. X-Ray generation controller ...........................................................................................44
5.3. Image Acquisition system .................................................................................................. 45
5.3.1. Image Reconstruction time ............................................................................................ 45

PaX-Reve3D
2
5.3.2. Computed Tomography Detector ...................................................................................45
5.3.3. Panoramic Image Detector ............................................................................................46
5.3.4. Cephalometric Image Detector ......................................................................................46
5.4. Standard Accessories ........................................................................................................ 47
5.5. Image Viewer programs.....................................................................................................47
5.5.1. 3D Image Viewer (Ez3D2009 Standard) ........................................................................47
5.5.2. 3D Image Viewer (Ez3D2009 Professional) .................................................................. 49
5.5.3. 3D Image Viewer (Ez3D2009 Premium)........................................................................ 49
5.5.4. Database & File Server, 2D Image Viewer (EasyDent) .................................................49

Installation manual 3
Attention
E-WOO reserves the right to change the contents of this manual if necessary for performance
improvement or information complement without notification.
Regarding the contents of this manual, E-WOO cannot assume liability of safe and reliable operation
caused by User’s mistakes; therefore User must read this manual very carefully before using the system.
The details of the system might be different from this manual according to the model.
Conventions in this manual
The following symbols will be used throughout this manual for the users to keep better comprehension of
their meaning. Make sure that you fully understand them and obey the instructions they contain.
Symbol Message meaning
Note
This symbol indicates a note to help you get the best
performances from the system. Carefully read these
notes to bring about the best performance possible.
Warning
This symbol indicates a warning that should be
obeyed with extreme cares. When missed, it may
cause severe damages or physical injuries.
X-Ray This radiation symbol warns you about radiation
dangers.
Important
This indicates a compulsory action or instruction.
Contains important instructions. If not observed, there
might be malfunction of the system or damage to the
system or other problems may occur.

PaX-Reve3D
4
Caution for System Installation
1. To maintain the safety, the installer must read and follow this manual carefully.
2. The installer must confirm the system is installed as described in this manual and perform the
appropriate procedures therein.
3. Only a E-WOO technician or a qualified technical expert can install the system.
4. Applying pressure or spraying liquid on the system can cause fire and electrical accident.
5. Do NOT install the system in an environment exposed to volatile gas or vapor.
6. For a stable power supply avoid using the system simultaneously with other system of high electrical
capacity, and make sure to ground the system.
7. If there is any doubt on operation or condition, do NOT install the system until a E-WOO customer
support team confirms the reliability.
Guidelines for Protection against Radiation
The X-ray system may cause injury to the patients if used improperly. The instructions contained in this
manual must be read and followed when operating PaX-Reve3D. The world standard regulations
pertaining to radiation safety must be observed.
When exposing X-ray, User must be behind the protective wall, or take other protective actions. When a
breakdowns or troubles appear, User keeps at least 2m (7feet) away from the X-ray system to release the
exposure switch while observing patient and capture-progress.
User must provide the protective clothes to the patient. Before capturing, pregnant women must always
consult with doctors.

Installation manual 5
X-ray room requirement for system installation
Recommended Minimum Space
zPaX-Reve3D 2000(W) * 2500(D) * 2500(H) mm
- Above space is considered for the movement of both system operator and patient.
- The system is normally installed beside a wall, and operator uses the system on left.
Width of Door
- The width of door is more than 800mm for system movement into X-ray room.
Ground
- The condition of ground should be balanced for system balance.
- Ground should support a min. 500KG of weight.
Power Supply
- For system stability please guarantee 3KW power supply.
Protection against radiation
- For protection against radiation follow the government or local standards.
Safety Zone
- Check the safety zone.

PaX-Reve3D
6
Chapter 1. Introduction
1.1. System features
PaX-Reve3D is diagnostic equipment that incorporates Digital Dental Panoramic and Cephalometric
Imaging Systems, as well as Computed Tomography System with Cone Beam Technology. This
equipment is based on digital and computed tomography. Specifically, its advanced digital imaging
process allows for a considerably efficient diagnosis, well-rounded management information, and a real-
time sharing of image information in a network. It’s equipped with the-state-of-the-art CT sensor to
capture 3-D Computed Tomogram X-ray Scanned Image.
This equipment provides various features as follows.
Among them:
1. Consolidates Panoramic, One-shot Cephalometric and CT imaging mode into single system and
makes it possible to acquire high quality of digital images with ease.
2. Made it easy to operate using both PC and the LCD panel.
3. Features 3 in 1 system that provides all the necessary dental images to diagnose.
4. Supports a variety of capturing modes for a dental diagnosis and treatment like Implant, let alone the
basic panoramic mode.
5. Features capability of switching automatically the sensing mode, even without mounting and
unmounting sensors.
6. Employs the FPXD for the one-shot capture capability, especially for the professional dentists
practicing teeth correction.
7. Generates clear CT 3D-Images reconstructed from each slice so as to analyze the area invisible
from the regular 2D-images and makes the practices safer than ever before.
8. Needs not to be concerned any longer about space installed, since the size of system is similar to
the general panorama only system.
9. Takes into account that safety for the patients from exposure to X-Ray is primary concern. Thus a
greatly reduced dose of exposure, compared with that of general purpose CT X-Ray system, is
advantageous.
10. Improving reliability and dependability by adopting CAN(controlled area network) protocol that
generally is used in areas like airplane, thus leading to greatly reduced problem occurrences.
11. The PaX-Reve3D has been designed to carry out the following radiological examinations.
zStandard Panoramic mode
zSpecial panoramic mode
zCephalometric mode
zCT mode

Installation manual 7
1.2. General view of the PaX-Reve3D

PaX-Reve3D
8
zCEPHALOMETRIC UNIT: an assembled unit to carry out the Cephalometric imaging.
zONE-SHOT SENSOR: a sensor detecting signal in Cephalometric mode.
zCOLUMN UP/DOWN ADJUSTER: adjust the height of equipment to the patient height.
zTOUCH PAD SCREEN: allows the operator to control certain unit functions by touching screen.
It also displays the operating parameters and some texts messages. This panel works in a way
that touching the screen activates the unit.
zEAR ROD: The vertical pieces holding the ear rods are usually wood or plastic. Wood is better.
zNASAL POSITIONER: help the patient position correctly - usually in Cephalometric mode.
zEMERGENCY SWITCH: for safety reasons, this is used to terminate power to equipment by
pressing this button when a severe fault occurs. Its primary use is to protect humans and
equipment from a severe injuries and damages.
zCHIN REST: help the patient rest while imaging.
zX-RAY SENSOR Module: used to detect a dose of X-Rays through the patient and convert it
into electrical signal. This module consists of two different sensors to perform different purposes
- CT sensor and panoramic sensor.
zLED LAMP: Indicates current X-ray exposure activity (green at idle state, but turn into orange
color while x-raying).
zROTATING UNIT: moves to the proper position and turns around patient’s head during exposure.
zON/OFF SWITCH: turns on and off the equipment.
zX-RAY TUBE: a source of X-Ray emission.
zMIRROR: let the patients correct positions by themselves through reflection in a mirror.
zACCESSORY CABINET: used to keep little things relevant to the operation of this unit.
zTELESCOPIC COLUMN: this part of column moves up and down to be adjusted to patient
height.

Installation manual 9
zSTATIONARY COLUMN: this part of column is fixed to the base plate.
zBASE plate: used to balance and stabilize the whole equipment.
1.3. Exposure switch
The exposure switch enables you to launch a radiological image acquisition via exposure button from
outside the X-Ray room. You press and hold the exposure switch button until the end of acquisition.
Premature release of exposure switch button interrupts acquisition.

PaX-Reve3D
10
Chapter 2. Preparing installation for the unit
2.1. Responsibilities of the Manufacturer
When the situation is as below, the manufacturer has the responsibilities for the safe and proper working
of the system.
zWhen the system is installed as per installation manual.
zWhen the user uses the system as per user manual and instructions on the program.
zWhen the user software is installed as per software installation manual.
zWhen repairs are made by manufacturer’s engineers and/or trained engineers from the
manufacturer.
zWhen user uses authorized components or approved components.
2.2. Parts list (supplied)
Part Name Internal Box Item Specification Q'TY
Base,
Accessory,
PC
Base BASE
Base Cover 1
Base Plate 1
Footrest1 1
Footrest2 1
Footrest cover (Transparent) 1
Accessory
HEADREST 1
BAND Headrest Band (Vatech) 1
ACCESSORY
CABINET 1
BITE CHIN 1
NORMAL CHIN 1
SINUS CHIN 1
NON CHIN 1
TMJ CHIN 1
CHIN SUPPORT With Pin (1EA) 1
EAR ROD Ear rod L/R (With spring) 2
CABLE TIE 70mm 10
TOUCH PANEL ASS'Y Touch pad LCD 1
CABI ASS'Y 1
SERIAL CABLE 1

Installation manual 11
LAN CABLE 8 PIN LAN FOR PANO 10M 1
8 PIN LAN FOR PANO 1M 1
HUB CABLE 1
HOLDER X-ray Exposure Switch Holder 2
SPEAKER BOX 1
SWITCH Up/Down 1
INDICATOR BOX X-ray exposure switch 1
Cable for exposure switch
USB KEY Image reconstruction key 1
3D VIEWER KEY Image viewing 3D 1
CASE Handle table 3
Case Wire-1 1
BLOCK
Column Support Block A 2
Column Support Block B 2
Base Support Block
Rear fixing Plate 1
CAP Hole Cap (Silicon) 3
Silicon Cap 30
WRENCH BOLT
8*25 4
8*25 (With ø8Spring&Flat
Washer) 6
8*60 (With ø8Spring&Flat
Washer) 2
8*50 (With ø8Spring&Flat
Washer) 1
3*8 2
4*8 2
4*25 4
4*8 16
PANORAMA COVER Small Disposable Bag 1
CARPUS PLATE Carpus Plate (With sticker) 1
Guide shaft 1
Manual USER MANUAL
EasyDent V4
Ez3D2009
3-D Dental Imaging
Exposure Switch Manual 1

PaX-Reve3D
12
2.3. Check Shock Watch and Tilt Watch
All kinds of goods are subject to the damage in their transit. Therefore our units are shipped with “Shock
Watch” and “Tilt Watch” stickers to monitor delivery status. Please check whether the “Shock Watch” and
“Tilt Watch” on each carton have been damaged before opening the cartons.
<Shock Watch> <Tilt Watch>
Warning
Please check the color status of Shock Watch & Tilt Watch on each carton to see it
has turned RED. If color of either of them did change, it represents great impacts in
transit. Please contact your delivery company agent, or VATECH.

Installation manual 13
Chapter 3. Installing the unit
3.1. Assembling the base and column
Please make sure that floor surface on which the PaX-Reve3D is to be installed
is flat and dry.
Back
Left Right
Front
At least 3 people are needed to carry and install this unit to prevent this product
from being damaged and person from being injured.
Please keep at least 300mm of distance from the wall so that you could
assemble Cephalometric unit, cabling work and assembly of the covers on the
backside.

PaX-Reve3D
14
Procedures:
1. Carefully unpack the carton and position the unit, as follows. That is, lay the unit on the floor, with
the column down, for preparing installation.
2. Please remove the moving handle using the wrench.

Installation manual 15
3. Please push the base’s rear plate (Accessory No.10) fully inside the lower part of column, as the
arrows indicated below.
UP
Down
Underside of lower part of column Rear bracing plate for the base
4. Please assemble the column and the base together. Be careful of the heavy weight of the unit while
assembling.
Beforeassembly

PaX-Reve3D
16
After assembly
5. Please put the unit in upright position, as shown below. At least 3 people are required to do this.
Think about the unit is too heavy. Firmly screw 4 wrench bolts (M8*25, Accessory No.11), as stated
in the following figure.
Important: one person should grasp the bar, pulling the unit toward himself, to
facilitate screwing bolts. After screwing 4 wrench bolts, it is no longer necessary to do
this work

Installation manual 17
6. Now remove two handle bars from the unit.
7. By factory default, to prevent the unit from being damaged while shipping and moving the unit, the
rotating unit and vertical frame are firmly fixed to a particular position, using wrench bolts.
Please unscrew 4 screws to release those units.

PaX-Reve3D
18
8. Please connect the power supply and Up/Down switch cables.
9. Turn on the unit and move up the column unit by approximately 20cm, using the Up/Down switch.
Power
supply
UP
/
DOWN