VDO SENSOR KITAS 2171-0 User manual

The intelligent KITAS sensors form a new generation
of speed sensors. With the innovative crypto-graphi-
cal IC the gear-box signals can be transmitted tam-
per-proof without an armoured cable for the first
time.
A statically operated hall-effect IC is utilised as the
sensor. This element converts the revolution of an
impulse- or gearwheel into electrical signals.
In parallel to the encrypted revolution data the con-
ventional real-time signal is also available. Through a
comparison of these two sources the tachograph
can detect data manipulations safely. Therefore the
KITAS sensor and the tachograph form an authorised
system.
A link between the serial numbers of the KITAS sen-
sor and the tachograph enchances the security even
further.
Features
• Conform with Regulation VO (EG) No. 1360/2002
• Certificate through BSI according to ITSEC,
level E 3 High, as per supplement 1B
• Full fills the Generic Security Targets as per
supplement 1B
• Mechanical input
• Static measuring (Hall-IC)
• Data security by cryptological procedure
(TRIPLES DES)
• Sealing possibility
• Replace the steel armoured cable
• Interface according to ISO 16844-3
• Standard plug according to ISO 15170
• Comparison of the real-time signal with the
encoded signal
• Power-On reset function
• Storage of additional facts (identification,
installation)
Use
• Only for use in the new tachograph generation
MTCO 1324 (Modular Tachograph) and DTCO
1381 (Digital Tachograph)
www.vdo.com
Sensor
KITAS 2171-0x

VDO – A Trademark of the Continental Corporation09/2008 | A2C59512784 | We reserve the right to make changes in availability as well as technical changes without prior notice.
Continental Trading GmbH | Heinrich-Hertz-Strasse 45 | 78052 Villingen-Schwenningen | Germany
E-mail: [email protected] | www.vdo.com
Sensor
KITAS 2171-0x
Technical Information
Operating voltage 6,5 ... 9 V
Power consumption max. 15 mA
Impulse/revolution 8 (s- und v- impulse)
Operating temperature - 30 °C ... + 120 °C ADR
(T4/Part 4)
Storage temperature A - 40 °C ... + 140 °C
Impulse ratio 30 - 70 % ... 70 - 30 %
Connection unearthed
Signal shape (Pin 3) rectangular
Frequency range 1 Hz - 1000 Hz
Output signal (Pin 3) Real-time signal
U
L max = 800 mV
(@I = 250 μA)
U
H min = UE - 1,5 V
(@I = - 150 μA)
Output short-circuit 28 V, 1 min
Output signal Pin 4 Bidirectional interface
Protection against voltage
interference DIN 40 839
Interference protection DIN 40 839
Protection EN 60529 / IP 69K
Resistance to vibration 10 g
Connection of sensor to Standard plug accordingto to
sensor lead ISO 15170
Connection of sensor via thread M 22 x 1,5 or
to vehicle gearbox 7/8” 18 UNS 2B
Torque max. 50 Nm ± 10 Nm
(wrench size) (WS 27)
Dimensions (L in mm) approx. 46,5 x 79
Weight approx. 135 to 150 g