Vecow PE-6000 User manual

USER
Manual
USER
Manual
1.0.0 Edition 20200918
PCI Express x4/4-channel 2.5G LAN,
IEEE 802.3at Compliant Intel®I225 PoE+PCIe Expansion Card
PE-6000

ii
©Vecow PE-6000 User Manual
Version Date Page Description Remark
0.10 2020/09/03 All Preliminary Release
1.00 2020/09/18 All O󰀩cial Release
Record of Revision

iii
©Vecow PE-6000 User Manual
This manual is released by Vecow Co., Ltd. for reference purpose only. All
product o󰀨erings and specications are subject to change without prior notice.
Vecow Co., Ltd. is under no legal commitment to the details of this document.
Vecow shall not be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use of this document, the products, or any third party
infringements, which may result from such use.
Disclaimer
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if it is not installed and used
in accordance with the instruction manual, it may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
FCC
The products described in this manual comply with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to
remain CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.
CE
Declaration of Conformity
This document contains proprietary information protected by copyright. No part
of this publication may be reproduced in any form or by any means, electric,
photocopying, recording or otherwise, without prior written authorization
by Vecow Co., Ltd. The rights of all the brand names, product names, and
trademarks belong to their respective owners.
Copyright and Trademarks

iv
©Vecow PE-6000 User Manual
Part Number Description
PE-6004 Intel® I225 4-CH PCI Express Card with 2.5GigE PoE+
Order Information

v
©Vecow PE-6000 User Manual
Table of Contents
CHAPTER 1 GENERAL INTRODUCTION 1
1.1 Overview 1
1.2 Features 1
1.3 Product Specication 2
1.4 Mechanical Dimension 3
1.4.1 PE-6004 3
1.4.2 PE-6004 With Heatsink 3
1.4.3 PE-6004 With Heatsink and Fan 4
CHAPTER 2 GETTING TO KNOW YOUR PE-6000 5
2.1 Packing List 5
2.2 PE-6004 I/O and Indication 6
CHAPTER 3 GETTING START 10
CHAPTER 4 DRIVER INSTALLATION AND SETTING 12
4.1 Driver Installation 12
4.2 Jumbo Frame 16
4.3 Link Aggregation 18
APPENDIX A : PoE Guide 21
APPENDIX B : Software Functions 25

1
©Vecow PE-6000 User Manual 1 ©Vecow PE-6000 User Manual GENERAL INTRODUCTION
1
GENERAL INTRODUCTION
1.1 Overview
PE-6004 is a 4-ports 2.5GigE PCIe Expressx4 Expansion Card, supporting
IEEE 802.3at PoE+ up to 25.5W power output at 48V DC per port. Powered by
Intel® I225 LAN chipset, PE-6004 adopts 4-port Independent 2.5GigE Ethernet
controller and it supports up to 2.5Gbps data rate each port with teaming
functions, Fault Tolerance, IEEE 802.3ad Link Aggregation and Load Balancing,
up to 9KB Jumbo Frame. Vecow PE-6004 is an ideal PCIe expansion card
for industrial applications in Scientific Research, real-streaming video, AI
Surveillance, real-time inspection, and Industry 4.0/IIoT applications.
1.2 Features
• Intel® I225 2.5GBASE-T Ethernet Controller supports 4-port independent
2.5GigE LAN, up to 2.5Gbps data rate
• PCI Express x4 interface, PCIe 3.0 supports up to 8 GT/s
• Supports IEEE 802.3at Power over Ethernet (PoE+), up to 25.5W Power
Output at 48V DC per port, with PoE+ On/Off Control
• IEEE 802.3bz (2500BASE-T), IEEE 802.3ab (1000BASE-T), IEEE 802.3u
(100BASE-TX), and IEEE 802.3i (10BASE-TX) compliant
• Teaming features : Fault Tolerance, IEEE 802.3ad Link Aggregation and Load
Balancing, up to 9KB Jumbo Frame
• Time Sensitive Network (TSN) features : IEEE 1588 Precision Time Protocol
(PTP), IEEE 802.3AS Precision Timing Synchronization, IEEE 802.1Qav and
802.1Qbv
• Supports IEEE 802.3az Energy Efficient Ethernet (EEE) and DMA Coalescing
Power Management features
• Integrated Switching Voltage Regulator (iSVR) and IEEE 802.1q VLAN
supported
• -25°C to 60°C Operating Temperature

2
©Vecow PE-6000 User Manual 2 ©Vecow PE-6000 User Manual GENERAL INTRODUCTION
1.3 Product Specication
Ethernet
Interface PCI Express x4
Controller 4 Intel Ethernet Controller I225-LM
Data Rate 2.5Gbps/1Gbps/100Mbps/10Mbps
Jumbo Frame Up to 9KB supported
Link Aggregation (LAG) Present
Connector RJ45 type
PoE Standard IEEE 802.3at compliant
Power Requirements
Output
• 4 RJ45 PoE Port
• 4 LED for PoE On/Off Mode
• Up to 25.5W Power Output at 48V DC per port
Power Connector 1 4-pin ATX 12V Power Connector
Environment
Operating Temperature -25°C to 60°C with air ow (-40°F to 140°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Humidity 5% to 95% Humidity, non-condensing
Relative Humidity 95% @ 55°C
Certications FCC, CE, RoHS compliant
Mechanical
Dimension 168.0mm x 111.0mm (6.61" x 4.37")

3
©Vecow PE-6000 User Manual 3 ©Vecow PE-6000 User Manual GENERAL INTRODUCTION
1.4 Mechanical Dimension
1.4.1 PE-6004
19.1 (0.75)
121.0 (4.76)
111.1 (4.38)
167.7 (6.60)
106.6 (4.20)
98.4 (3.87)
Unit : mm (inch)
1.4.2 PE-6004 With Heatsink
19.1 (0.75)
121.0 (4.76)
111.1 (4.38)
167.7 (6.60)
106.6 (4.20)
98.4 (3.87)
Unit : mm (inch)

4
©Vecow PE-6000 User Manual 4 ©Vecow PE-6000 User Manual GENERAL INTRODUCTION
1.4.3 PE-6004 With Heatsink and Fan
19.1 (0.75)
121.0 (4.76)
111.1 (4.38)
167.7 (6.60)
106.6 (4.20)
98.4 (3.87)
Unit : mm (inch)

5
©Vecow PE-6000 User Manual 5 ©Vecow PE-6000 User Manual GETTING TO KNOW YOUR PE-6000
2
GETTING TO KNOW YOUR PE-6000
2.1 Packing List
Item Description Qty
1PE-6004, Intel I225 4-port 2.5GigE PoE+ PCI Express Expansion Card 1
2Accessory box, which contains Vecow Drivers & Utilities DVD 1

6
©Vecow PE-6000 User Manual 6 ©Vecow PE-6000 User Manual GETTING TO KNOW YOUR PE-6000
2.2 PE-6004 I/O and Indication
2.2.1 PoE (Power over Ethernet) Ports
PE-6004 is equipped with 4 IEEE 802.3at PoE+ ports for transmitting power as
much as 25.5W/48V per port and 1G/2.5G GBASE-T gigabit data signals over
standard Ethernet CAT-5/CAT-6 cable.
Each PoE connection is powered by Intel® I225-LM 2.5GBASE-T Gigabit Ethernet.
Controller and independent PCI express interface to connect with multi-core
processor for networking and data transmit optimization. Only when PoE port
starts to supply power to power devices, the dedicated LED will be lightened.
The pin-outs of LAN 1 and LAN 4 are listed as follows :
Pin No. 10/100 Mbps 1000Mbps PoE
1E_TX+ MDI0_P PoE+
2E_TX- MDI0_N PoE+
3E_RX+ MDI1_P PoE-
4 ---- MDI2_P ----
5 ----- MDI2_N ----
6 E_RX- MDI1_N PoE-
7 ----- MDI3_P ----
8------ MDI3_N ----
PoE Power LED
LAN 4 LAN 3 LAN 2 LAN 1 PoE Power LED
LAN 4
LAN 3
LAN 2
LAN 1
LAN 4
LAN 3
LAN 2
LAN 1

7
©Vecow PE-6000 User Manual 7 ©Vecow PE-6000 User Manual GETTING TO KNOW YOUR PE-6000
2.2.2 Power Input
The PE-6004 is also equipped with one 4-pin power plug (12V, 6A max) for
additional power supply. For most cases, the power obtained from PCIe bus is
su󰀩cient for the PoE devices, and you do not need to supply extra power to the
card.In case the external power is needed, you can use 4-pin ATX power connector
(+5V/Red, GND/Black, GND/Black, +12V/Yellow) inside the host computer. Please
always conrm the polarity before you plug into the onboard 4-pin power plug.
CN1 :
Pin No. Denition Pin No. Denition
1NC 3GND
2GND 4 +12V
CN 1
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the left bottom corner lightens in OFF when the cable is
properly connected to a 10M/100Mbps Ethernet network; The LED indicator
on the left bottom corner lightens in solid green when the cable is properly
connected to a 1000Mbps Ethernet network; The LED indicator on the left
bottom corner lightens in solid orange when the cable is properly connected to
a 2.5Gbps Ethernet network The right LED will keep twinkling/o󰀨 when Ethernet
data packets are being transmitted/received.
1 8 LED Status 10M/100Mbps 1000Mbps 2.5Gbps
Right LED Flash Green Flash Green Flash Green
Left LED o󰀨 Solid Green Solid Orange
PoE LED LED Color PoE Status
LED1-4 Solid Green PoE On

8
©Vecow PE-6000 User Manual 8 ©Vecow PE-6000 User Manual GETTING TO KNOW YOUR PE-6000
2.2.3 PoE Power On/O
PE-6004 controls PD69104B PoE Power ON/OFF via SMBUS. Jumper JAD1~
JAD14 address setting as below (1-2=H , 2-3=L) :
JAD4 JAD3 JAD2 JAD1 Address
2-3 2-3 2-3 2-3 0x40
2-3 2-3 2-3 1-2 0x42 (Default)
2-3 2-3 1-2 2-3 0x44
2-3 2-3 1-2 1-2 0x48
2-3 1-2 2-3 2-3 0x4A
2-3 1-2 2-3 1-2 0x4C
2-3 1-2 1-2 2-3 0x4E
2-3 1-2 1-2 1-2 0x50
1-2 2-3 2-3 2-3 0x52
1-2 2-3 2-3 1-2 0x54
1-2 2-3 1-2 2-3 0x56
1-2 2-3 1-2 1-2 0x58
1-2 1-2 2-3 2-3 0x5A
1-2 1-2 2-3 1-2 0x5C
1-2 1-2 1-2 2-3 0x5E
JAD1 - JAD4

9
©Vecow PE-6000 User Manual 9 ©Vecow PE-6000 User Manual GETTING TO KNOW YOUR PE-6000
2.2.4 Fan Connector
Fan power connector supports for additional thermal requirements. The
pinassignments of FAN1 is listed in the following diagram :
Pin input :
Pin No. Denition Pin No. Denition
1GND 2+12V (1.5A max)
3------ 4 ------
FAN1

10
©Vecow PE-6000 User Manual 10 ©Vecow PE-6000 User Manual GETTING START
GETTING START
3
Step 1. Insert PE-6000 golden nger and PCI bracket into PCIe socket carefully.
Step 2. Make sure golden nger and PCI bracket are inserted smoothly.

11
©Vecow PE-6000 User Manual 11 ©Vecow PE-6000 User Manual GETTING START
Step 3. Make sure the bracket aligns screw hole.
Step 4. Fasten the M3 or #6-32 screw.

12
©Vecow PE-6000 User Manual 12 ©Vecow PE-6000 User Manual DRIVER INSTALLATION AND SETTING
DRIVER INSTALLATION AND SETTING
4.1 Driver Installation
This section describes :
How to install drivers for PE-6004 PoE Card.
System OS :
Windows 10-64bit
Step 1. Execute "Intel PROWin64.exe (25.1 Later version)" and then go "Next"
step.
4

13
©Vecow PE-6000 User Manual 13 ©Vecow PE-6000 User Manual DRIVER INSTALLATION AND SETTING
Step 2. Select "Modify" and then go to "Next" step.
Step 3. Select "Next" step.

14
©Vecow PE-6000 User Manual 14 ©Vecow PE-6000 User Manual DRIVER INSTALLATION AND SETTING
Step 4. Click the "Install" icon to begin the installation.
Step 5. Install wizard completed.

15
©Vecow PE-6000 User Manual 15 ©Vecow PE-6000 User Manual DRIVER INSTALLATION AND SETTING
Step 6. Select "Finish" step.
Once you need this network driver, you could remove this program on Control
panel directly.