VeGue VS-0808 User manual

Trouble shooting guideProduct featuresCharging instructionsCommon function descriptionVol：Adjust volumeTreble：Adjust trebleBass： Adjust bassMic Vol：Adjust microphone volumeEcho：Adjust echoMic：Wired microphone inputWhen charging, connect the supplied power adapter to AC 90V-240V~ for charging. Thecharging time should be 6 ~ 8 hours. After being fully charged, unplug the power supply to avoiddamage to the battery due to long-term charging.Battery level indicator: There is a battery level indicator on the display. When the battery power is low, the entire power indicator icon will flash,so please charge in time. When charging, the battery indicator icon willflash. After the flashing stops, the battery should continue to charge for1 ~ 2 hours, which can prolong the battery life.Note: If the battery is used out, please recharge the battery within 48 hours.Do not leave the empty battery for a long time, otherwise the battery will be damaged.Main technical specificationsOutput power-----------------------------------Input sensitivity-----------------------------SNR-----------------------------------------Frequency response------------------------Power supply----------------------------250W500±30mV≥65dB26Hz~18KHzAC 90V-240V~Instruction Manual*Above specifications are the specifications of the sampling machine and are for reference purpose only.*Because of continuous product improvement.specifications will keep changing at any time without prior notification. This system can be used with PC, DVD, VCD, MP3, Electronic Piano and any device withaudio output.The amplifying circuit is designed with high performance and high fidelity, and equipped withprofessional and high quality speaker, it can make the sound field positioning clear and layered.The system voice effect is outstanding, the bass is surging and shocking, the middle tone isstrong and bright, the treble is crisp and pleasant.Professional electronic frequency division circuit, so that the division point of the machine moreaccurate, better effect.The use of professional design and manufacture of large capacity batteries, as well as audiopower supply capacitor makes the local power reserve margin more larger,more stable,betterdynamic,higher SNR.VS-0808VS-0808VS-0808Portable SpeakerPortable SpeakerPortable Speaker
CommonproblemsPossible CauseSolutionThere is no sound when power is onDistortion of soundMicis silentMP3 is silent1. No input source.2. The main volume is at the minimum position.1. Use better music signals.2. Adjust the volume appropriately.1.Turn down the main volume.2. Check whether the speaker is damaged or not.If it so, it needes to be repaired.1.Volume is adjusted to max.2.Speaker may be damaged.1.USB song format is wrong.2. Improper operation leads toprocedural chaos.3. The USB/TF card is notinserted properly.1. Convert the format to MP3.2. Restart the machine.3.
Unplug and re-plug into the USB/TF card.
1. The microphone switch is noton.2.
Mic volume is at 0 position.
3. Low battery of wirelessmicrophone.1. Turn on the microphone switch.2. Adjust the microphone volume appropriately.3. Replace the wireless microp-hone battery.

Remote control instructionsDescription of controlsRear panel instructions*Image diagram, for reference only*Image diagram, for reference only*Image diagram, for reference only1. Mute2. Song serial number3. Input selection4. The volume +5. Next6. The volume -7. Sound field effect8. Next file9. Previous file10.Recording11. Play the record12. PREV13. Play/Pause14. The light switch15. RepeatGuitarUSB/TFMicrophone controls and basic operationGuitar jack: Connect guitar.Guitar Volume: Adjust the guitar volume.1. The TF interface2. Bass volume 3. The USB interface4. Treble volume 5. Audio output6. Audio input7. Adjust microphone volume8. Guitar input9. Echo 10. Microphone 1 input11. Guitar volume 12. Microphone 2 input13. Recording/Recording playback14. PREV15. Play/pause16. NEXT17. Mode selection18. Light switch19. Microphone priority20. Play on loop21. Adjust volume22. The screen1.Under normal circumstances, the remote control should be used within a range of about 20 feet and 30 degrees from the remote reception window.2.When operating the remote control, point the remote control at the receiver window of the machine. There should be no obstacles between the remote control and the machine.3.If the receiving window is in the position of strong light, the remote control may fail. In this case, please remove the machine to avoid direct exposure to strong light.4.Please don't make both new and old batteries work together,and regularly check whether the remote control batteries need to be replaced.Music files in USB and TF cards should be formatted as FAT32 on the computer.The order about music play is based on file name,if the music file names are as "01,02,03"in sequence.This product will play the file "01"first.Copy MP3 or WMA music files to USB/TF cards. It is recommended to delete unnecessary files and folders to speed up card reading and reduce card reading problemsRecording functionBluetooth operationPlay functionUSB port: insert USB and play music.TF port: insert TF card and play music.Supports MP3, WMA, and WAV music formats, outstanding sound performance, high faxstereo design.M: to switch external audio, MP3 / Bluetooth functions.►||: press this key to pause the music, and press again to continue.|◄◄ / ►►|: when playing, select the PREVIOUS/NEXT music.Bluetooth connection method:Turn on the speaker,press the‘M’key on the speaker panel,and the screen will show ‘BLUE’.Use your phone to connect the Bluetooth of the speaker.The Bluetooth name is VS-0808.If the connection fails,please restart the device or the phone and try again.The use range of the Bluetooth is 32ft in the open area.
1.Power switch2.AC 90V-240V~3.Light switch4.DC 12V IN
1243Risk of electric shock do not open.It is a normal phenomenon that the machine is heated during operation hot surface do not touch.WARNING1.Microphone on2.Microphone off3.Screen123
20 feet
Please insert USB or TF card first and then press“●/►···” into recordingmode. When recording music at the first time, an new file “RECORD" will becreated in the card and all recordings will be saved into the file. Theserecording files are automatically named as“FILE0000, FILE0001……” insequence. When recording music, press“●/►”to puase it and press again to continue. Press“M” or“●/►”to quit recording mode. Please press “●/►” into recording-play mode(automatically play themusics recording before). Usually the machine will play the last recordingmusic first. Press PREV( |◄◄) or NEXT( ►►|) to select the music. PressReplay on the remote control to replay music. If you would like to replay singlemusic or all musics, please press Replay repeatedly.