Vents TT SILENT 100 User manual

MIU_06EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
IN-LINE MIXED TYPE FANS
TT SILENT 100/125/150
TT SILENT 100/125/150
INSTALLATION GUIDE
INSTALLATION
Tools required
Pencil Drill Screwdriver Dowel (4 pcs.) Screws (4 pcs.)
MOUNTING
Fans may be mounted either vertically or horizontally. We recommend minimum 8’of insulated exible duct between any exhaust grill and fan for low noise level. . Outlet
ange should always be connected to an air duct.
min 8 inch min 8 inch
Typical installation of the fan

MIU_06EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
Connection of the fan and standard wall socket
The fan must be connected using durable, insulated and heat-resistant cables
and wires.
Connect the cables according to the wiring diagram.
3
2
min 1 m
12
3
2
min 1 m
12

MIU_06EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
1) Disconnect the fan from power supply.
2) Unscrew the screws from the xing brackets.
3) Deinstall the xing brackets.
8
7
5 6
8
4) Remove the fan from the casing.
5) Mark holes on the wall.
6) Drill the holes and insert the expansion anschors.
7) Fix the fan.
8) Install the fan into the casing
9) Connect air ducts

MIU_06EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
12 13
14 15
16 17
18 19
TT 100/125
TT 125S/150/160
MAX
MIN
MAX / MIN
MAX
MIN
MAX / MIN
N
L2
N
L
QF
~
X
N
L1
N
L
QF
~
X
QF
N
L1
L2
S
N
L
~
X
L2
LL1
N
~
X
N
L1
N
L
QF
~
X
N
L2
N
L
QF
~
X
L2
LL1
N
~
X
QF
N
L1
L2
S
N
L
~
X
15