Verbatim Fingerprint Secure USB Drive User manual

USER MANUAL
1907
Fingerprint Secure USB Drive

2
EN
Need assistance? Have questions?
If you have a question concerning this product, need information on other Verbatim
products or require technical assistance, please contact the Verbatim Support
Centre. Please visit www.verbatim.com/support for details.
Warning!
All rights reserved. The products named in this manual are only used for
identification purposes and may be trademarks or registered trademarks of the
respective companies. This device was designed for home or office use.
Warning! This device is equipment complying with EN55032 class A. This
equipment can cause radio disturbances in a residential area. If this is the case, the
user has to take appropriate measures and assume all responsibility and costs for.
It may not be used near or with any life-sustaining systems.
Verbatim cannot be made liable for any damages, loss of data or damage following
thereof -whatsoever (including, without limitation, damages for loss of business
profits, business interruption, loss of business information, or other pecuniary loss)
arising out of the use of or inability to use this Verbatim product, even if Verbatim
has been advised of the possibility of such damages.
We reserve the right to upgrade our products in keeping with technological
advances.
Dear user
Thank you for selecting the Verbatim Fingerprint Secure USB Drive as your external
data storage device.
For optimal use and performance we advise you to read this manual carefully before using
this product.
Please note: this manual is a general manual which is used for several Verbatim products.
Product pictures shown in this manual may differ from the device you purchased.
Contents of the box
Please check the contents of the box. All articles included in this box are listed on the
back of the packaging.

3
EN
Table of Contents
General Information...................................................................................................page 4
Chapter 1
Setting up an Administrator using Fingerprint Secure User Manager Software .........page 5
Chapter 2
Adding / removing / editing username or privileges using
Fingerprint Secure User Manager Software ..............................................................page 7
Chapter 3
Accessing the Secure Partition without using the Fingerprint Secure Software.........page 8
Chapter 4
Accessing the Secure Partition using the Fingerprint Secure Software ....................page 9
Rights .................................................................................................... ................................page 10
FCC Compliance ...................................................................................... ...........................page 11
WEEE Notice ........................................................................................... .............................page 11
CE Declaration ........................................................................................ .............................page 12
RoHS Compliance ...............................................................................................................page 12

4
EN
General Information
Features:
• Supports USB Super-speed (5Gbps) / High-speed (480Mbps) / full-speed (12Mbps)
operation
• Supports Windows 7 / 8 / 10, Mac OS X 10.4 or higher
• Includes 256-bit AES Hardware Encryption
• Fingerprint recognition to prevent unauthorised users accessing your data
Specifications:
• Interface: USB 3.0
System Requirements:
PC:
• Minimum Intel Processor Pentium II/50MHz, 64MB RAM
• Windows 7 / 8 / 10
• Active USB port
MAC:
• Minimum Apple G processor, 64MB RAM
• Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3
• Active USB port
Package Contents:
• Verbatim Fingerprint Secure USB Drive
• User Manual (pre-loaded to the drive)

5
EN
Chapter 1: Setting up an Administrator using Fingerprint
Secure User Manager Software
1. Connect Fingerprint Secure to your PC. A removable disk ("Fingerprint Secure") and
a Virtual DVD RW Drive ("DVD RW Drive") will appear in "My Computer". The Virtual
DVD RW Drive is an undeletable partition on your Fingerprint Secure on which the
Fingerprint Secure software and user manuals are stored.
2. If the virtual DVD-RW drive does not automatically open after the Fingerprint Secure
has been connected, double-click on the Virtual CD ROM drive icon ("CD ROM Drive")
to open it.
3. Double-click on the Fingerprint Secure User Manager application icon. When the
application opens you will be asked to set up an administrator password. This
password is a backup access method for the administrator.

6
EN
4. You will be asked to enrol an administrator fingerprint. Enter the user name and select
Read Only if the administrator will not be able to make changes to data stored in
the secure partition. Gently press your finger on the sensor and release, then press
again. Tilt and roll your finger slightly each time and keep pressing until the process is
complete.
5. If the administrator’s fingerprint is correctly enrolled you will see the user name in the
table of authorised users.

7
EN
Overview of User Privileges:
Administrator:
You can only use the “Fingerprint Secure User Manager” software if you are an
administrator.
Read Only:
User can only read data in the secure partition and is are not able to add, change
delete files.
Chapter 2: Adding / removing / editing username or privileges
using Fingerprint Secure User Manager Software
1. Open the Fingerprint Secure User Manager application as outlined in steps 1-3 of the
previous section. Note, adding/removing/editing a user is only possible if you are a
registered Administrator.
2. To add a user click the + symbol and follow the same sequence as registering the
Administrator’s fingerprint
3. To remove a user, select the username in the table of authorised users and click the –
symbol.
4. To edit a username or change their privileges, select the username in the table of
authorised users and click the pencil symbol.

8
EN
Chapter 3: Accessing the Secure Partition without using the
Fingerprint Secure Software
1. Connect Fingerprint Secure to your PC and wait until the LED stops flashing.
2. Gently put your finger on the sensor. If the secure partition will doesn’t open
automatically, try again touching a different part of your fingerprint on the sensor.
3. Double click the secure partition file folder in “My Computer” to access the secure
data.

9
EN
Chapter 4: Accessing the Secure Partition using the
Fingerprint Secure Software
1. Connect Fingerprint Secure to your PC and open the Fingerprint Secure application.
2. Gently put your finger on the sensor. If the fingerprint is recognised the software will
display a tick and the secure partition will open.
3. If the fingerprint is not recognised the software will display an X. Try again touching a
different part of your fingerprint on the sensor.

10
EN
Note
Verbatim GmbH may at any time revise the content of this user guide without
further notice.
Rights
Copyright © 2019 Verbatim GmbH. No part of this document may be reproduced in any
form or by any means, for any purpose, without the express written permission of Verbatim
GmbH. All rights reserved.
All other brands and product names referenced herein are property of their respective
owners.